tvfaq Community

openpli 7.3-release vuzero4k

vuzero4k login: root
root@vuzero4k:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.1.20-1.9 (oe-user@oe-host) (gcc version 6.3.0 (GC   C) ) #1 SMP Tue Jul 6 10:32:03 UTC 2021
[    0.000000] CPU: ARMv7 Processor [420f1000] revision 0 (ARMv7), cr=30c5383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio   n cache
[    0.000000] Machine model: BCM972604USFF
[    0.000000] moving dtb from 0x0000000007618000 to 0x00000000008cd5d0
[    0.000000] bmem: Reserved 699 MiB at 0x0000000052500000
[    0.000000] cma: Reserved 16 MiB at 0x0000000051400000
[    0.000000] Forcing write-allocate cache policy for SMP
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 516096
[    0.000000]   DMA zone: 512 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 65536 pages, LIFO batch:15
[    0.000000]   HighMem zone: 450560 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] PERCPU: Embedded 12 pages/cpu @cefb9000 s16844 r8192 d24116 u4915   2
[    0.000000] pcpu-alloc: s16844 r8192 d24116 u49152 alloc=12*4096
[    0.000000] pcpu-alloc:

• 0
• 1
  [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag   es: 515584
  [    0.000000] Kernel command line: root=/dev/mmcblk0p7 rootfstype=ext4 rootflag   s=data=journal rootwait rw coherent_pool=2M rw bmem=699m@1317m
  [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  [    0.000000] Memory: 1306508K/2064384K available (6111K kernel code, 310K rwda   ta, 2044K rodata, 304K init, 197K bss, 741492K reserved, 16384K cma-reserved, 10   70076K highmem)
  [    0.000000] Virtual kernel memory layout:
  [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
  [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
  [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  [    0.000000]       .text : 0xc0008000 - 0xc07ff280   (8157 kB)
  [    0.000000]       .init : 0xc0800000 - 0xc084c000   ( 304 kB)
  [    0.000000]       .data : 0xc084c000 - 0xc0899bb0   ( 311 kB)
  [    0.000000]        .bss : 0xc089c000 - 0xc08cd5d0   ( 198 kB)
  [    0.000000] Hierarchical RCU implementation.
  [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  [    0.000000] NR_IRQS:16 nr_irqs:16 16
  [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0802000, parent irq:    89)
  [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0808000, parent irq:    61)
  [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080aa00, parent irq:    62)
  [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080c640, parent irq:    91)
  [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080e200, parent irq:    57)
  [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0810500, parent irq:    95)
  [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0812400, parent irq:    96)
  [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0814540, parent irq:    93)
  [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0816440, parent irq:    94)
  [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0818480, parent irq:    98)
  [    0.000000] MCP: Enabling write pairing
  [    0.000000] Architected cp15 timer(s) running at 27.00MHz (phys).
  [    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles:    0x63a1e71a3, max_idle_ns: 440795203123 ns
  [    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 43980   46511093ns
  [    0.000010] Switching to timer-based delay loop, resolution 37ns
  [    0.000370] Console: colour dummy device 80x30
  [    0.000388] Calibrating delay loop (skipped), value calculated using timer fr   equency.. 54.00 BogoMIPS (lpj=27000)
  [    0.000396] pid_max: default: 32768 minimum: 301
  [    0.000487] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  [    0.000492] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  [    0.000844] CPU: Testing write buffer coherency: ok
  [    0.001047] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  [    0.001081] Setting up static identity map for 0x8480 - 0x84d8
  [    0.014843] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  [    0.014889] Brought up 2 CPUs
  [    0.014899] SMP: Total of 2 processors activated (108.00 BogoMIPS).
  [    0.014903] CPU: All CPU(s) started in HYP mode.
  [    0.014905] CPU: Virtualization extensions available.
  [    0.015176] devtmpfs: initialized
  [    0.022916] VFP support v0.3: implementor 42 architecture 3 part 10 variant 0    rev 0
  [    0.023104] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max   _idle_ns: 1911260446275000 ns
  [    0.024135] NET: Registered protocol family 16
  [    0.025280] DMA: preallocated 2048 KiB pool for atomic coherent allocations
  [    0.029942] cpuidle: using governor ladder
  [    0.035951] cpuidle: using governor menu
  [    0.041260] No ATAGs?
  [    0.041294] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint    registers.
  [    0.041301] hw-breakpoint: maximum watchpoint size is 8 bytes.
  [    0.041583] Broadcom Brahma-B15 readahead cache at: 0xd0aaa478
  [    0.052097] brcmstb-gpio f040a400.gpio: Registered 3 banks (GPIO(s): 0-95)
  [    0.052273] brcmstb-gpio f04174c0.gpio: Registered 2 banks (GPIO(s): 96-159)
  [    0.052597] SCSI subsystem initialized
  [    0.053216] libata version 3.00 loaded.
  [    0.053382] usbcore: registered new interface driver usbfs
  [    0.053419] usbcore: registered new interface driver hub
  [    0.053447] usbcore: registered new device driver usb
  [    0.053500] Linux video capture interface: v2.00
  [    0.053555] pps_core: LinuxPPS API ver. 1 registered
  [    0.053559] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome   tti <giometti@linux.it>
  [    0.053574] PTP clock support registered
  [    0.053926] Advanced Linux Sound Architecture Driver Initialized.
  [    0.054749] Switched to clocksource arch_sys_counter
  [    0.054904] FS-Cache: Loaded
  [    0.060731] thermal thermal_zone0: failed to read out thermal zone (-22)
  [    0.060870] NET: Registered protocol family 2
  [    0.061247] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  [    0.061264] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
  [    0.061286] TCP: Hash tables configured (established 2048 bind 2048)
  [    0.061325] UDP hash table entries: 256 (order: 1, 8192 bytes)
  [    0.061338] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  [    0.061447] NET: Registered protocol family 1
  [    0.061638] RPC: Registered named UNIX socket transport module.
  [    0.061641] RPC: Registered udp transport module.
  [    0.061644] RPC: Registered tcp transport module.
  [    0.061647] RPC: Registered tcp NFSv4.1 backchannel transport module.
  [    0.061660] PCI: CLS 0 bytes, default 64
  [    0.062032] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
  [    0.062054] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counte   rs available
  [    0.062827] futex hash table entries: 512 (order: 3, 32768 bytes)
  [    0.063689] NFS: Registering the id_resolver key type
  [    0.063711] Key type id_resolver registered
  [    0.063715] Key type id_legacy registered
  [    0.063726] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  [    0.063732] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  [    0.064169] fuse init (API version 7.23)
  [    0.064780] bounce: pool size: 64 pages
  [    0.064809] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2   52)
  [    0.064817] io scheduler noop registered
  [    0.064823] io scheduler deadline registered
  [    0.064838] io scheduler cfq registered (default)
  [    0.065084] brcm-gisb-arb f0400000.gisb-arb: registered mem: d0aca000, irqs:    261, 262
  [    0.065633] brcmstb-sata-phy f0b10100.sata_phy: registered 1 port(s)
  [    0.065990] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
  [    0.066043] brcm-pci f0460000.pcie: no identity map; PCI drivers may fail
  [    0.166173] brcm-pci f0460000.pcie: down
  [    0.167498] brcmstb_memc f1102000.memc-ddr: registered
  [    0.167683] brcm-waketimer f0417680.waketimer: registered, with irq 264
  [    0.167861] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  [    0.168784] console [ttyS0] disabled
  [    0.168809] f040c000.serial: ttyS0 at MMIO 0xf040c000 (irq = 100, base_baud =    5062500) is a 16550A
  [    0.910515] console [ttyS0] enabled
  [    0.914332] f040d000.serial: ttyS1 at MMIO 0xf040d000 (irq = 101, base_baud =    5062500) is a 16550A
  [    0.923582] f040e000.serial: ttyS2 at MMIO 0xf040e000 (irq = 102, base_baud =    5062500) is a 16550A
  [    0.935574] loop: module loaded
  [    0.939409] brcm-ahci f0b12000.sata: controller can do ALPM, turning on CAP_A   LPM
  [    0.946826] brcm-ahci f0b12000.sata: masking port_map 0x1 -> 0x1
  [    0.952856] brcm-ahci f0b12000.sata: SSS flag set, parallel bus scan disabled
  [    0.970766] brcm-ahci f0b12000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0   x1 impl platform mode
  [    0.979748] brcm-ahci f0b12000.sata: flags: 64bit ncq sntf stag pm clo pmp sl   um part
  [    0.988259] scsi host0: brcm-ahci
  [    0.991722] ata1: SATA max UDMA/133 mmio [mem 0xf0b12000-0xf0b1299b] port 0x1   00 irq 87
  [    0.999657] brcm-ahci f0b12000.sata: Broadcom AHCI SATA3 registered
  [    1.007026] libphy: Fixed MDIO Bus: probed
  [    1.011508] bcmgenet f0480000.ethernet: GENET 5.0 EPHY: 0x0000
  [    1.017403] bcmgenet f0480000.ethernet: failed to get enet-mux clock
  [    1.036749] libphy: bcmgenet MII bus: probed
  [    1.060901] Broadcom BCM7260 f0480000.etherne:01: failed to request GPHY cloc   k
  [    1.068761] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
  [    1.074604] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
  [    1.080702] xhci-brcm: xHCI BRCM driver
  [    1.084708] ehci-brcm: EHCI BRCM driver
  [    1.102876] ehci-brcm f0b00300.ehci_v2: EHCI Host Controller
  [    1.104765] ata1: SATA down (SStatus 0 SControl 300)
  [    1.114054] ehci-brcm f0b00300.ehci_v2: new USB bus registered, assigned bus    number 1
  [    1.132033] ehci-brcm f0b00300.ehci_v2: irq 120, io mem 0xf0b00300
  [    1.143756] ehci-brcm f0b00300.ehci_v2: USB 2.0 started, EHCI 1.00
  [    1.150336] hub 1-0:1.0: USB hub found
  [    1.154108] hub 1-0:1.0: 1 port detected
  [    1.158296] ehci-brcm f0b00500.ehci_v2: EHCI Host Controller
  [    1.164045] ehci-brcm f0b00500.ehci_v2: new USB bus registered, assigned bus    number 2
  [    1.181995] ehci-brcm f0b00500.ehci_v2: irq 123, io mem 0xf0b00500
  [    1.193757] ehci-brcm f0b00500.ehci_v2: USB 2.0 started, EHCI 1.00
  [    1.200284] hub 2-0:1.0: USB hub found
  [    1.204053] hub 2-0:1.0: 1 port detected
  [    1.208281] ohci-brcm: OHCI BRCM driver
  [    1.212241] ohci-brcm f0b00400.ohci_v2: BRCM OHCI controller
  [    1.217996] ohci-brcm f0b00400.ohci_v2: new USB bus registered, assigned bus    number 3
  [    1.225917] ohci-brcm f0b00400.ohci_v2: irq 121, io mem 0xf0b00400
  [    1.287101] hub 3-0:1.0: USB hub found
  [    1.290875] hub 3-0:1.0: 1 port detected
  [    1.295031] ohci-brcm f0b00600.ohci_v2: BRCM OHCI controller
  [    1.300798] ohci-brcm f0b00600.ohci_v2: new USB bus registered, assigned bus    number 4
  [    1.309246] ohci-brcm f0b00600.ohci_v2: irq 124, io mem 0xf0b00600
  [    1.370097] hub 4-0:1.0: USB hub found
  [    1.373868] hub 4-0:1.0: 1 port detected
  [    1.378119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  [    1.384669] ehci-pci: EHCI PCI platform driver
  [    1.389181] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  [    1.395384] ohci-pci: OHCI PCI platform driver
  [    1.399961] usbcore: registered new interface driver usb-storage
  [    1.406127] mousedev: PS/2 mouse device common for all mice
  [    1.412155] i2c /dev entries driver
  [    1.416331] IR NEC protocol handler initialized
  [    1.420877] IR RC5(x/sz) protocol handler initialized
  [    1.425942] IR RC6 protocol handler initialized
  [    1.430484] IR JVC protocol handler initialized
  [    1.435027] IR Sony protocol handler initialized
  [    1.439657] IR SANYO protocol handler initialized
  [    1.444372] IR Sharp protocol handler initialized
  [    1.449088] IR MCE Keyboard/mouse protocol handler initialized
  [    1.454934] IR XMP protocol handler initialized
  [    1.459797] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor d   river
  [    1.467634] usb 1-1: new high-speed USB device number 2 using ehci-brcm
  [    1.504913] brcmstb-avs-cpufreq f04c4000.avs-cpu-data-mem: registered
  [    1.511597] sdhci: Secure Digital Host Controller Interface driver
  [    1.517791] sdhci: Copyright(c) Pierre Ossman
  [    1.522162] sdhci-pltfm: SDHCI platform and OF driver helper
  [    1.529054] sdhci-brcmstb f0200200.sdhci: No vmmc regulator found
  [    1.535161] sdhci-brcmstb f0200200.sdhci: No vqmmc regulator found
  [    1.571756] mmc0: SDHCI controller on f0200200.sdhci [f0200200.sdhci] using A   DMA
  [    1.581399] usbcore: registered new interface driver usbhid
  [    1.586988] usbhid: USB HID core driver
  [    1.594276] NET: Registered protocol family 17
  [    1.598848] Key type dns_resolver registered
  [    1.603267] Registering SWP/SWPB emulation handler
  [    1.612608] ALSA device list:
  [    1.615595]   No soundcards found.
  [    1.619227] hub 1-1:1.0: USB hub found
  [    1.624193] hub 1-1:1.0: 4 ports detected
  [    1.632964] Waiting for root device /dev/mmcblk0p7...
  [    1.667426] mmc0: MAN_BKOPS_EN bit is not set
  [    1.678016] mmc0: new high speed MMC card at address 0001
  [    1.683631] mmcblk0: mmc0:0001 4FTE4R 3.64 GiB
  [    1.688219] mmcblk0boot0: mmc0:0001 4FTE4R partition 1 4.00 MiB
  [    1.694192] mmcblk0boot1: mmc0:0001 4FTE4R partition 2 4.00 MiB
  [    1.700161] mmcblk0rpmb: mmc0:0001 4FTE4R partition 3 512 KiB
  [    1.708568]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
  [    1.739348] EXT4-fs: Warning: mounting with data=journal disables delayed all   ocation and O_DIRECT support!
  [    1.896777] usb 1-1.2: new high-speed USB device number 3 using ehci-brcm
  [    1.979114] usb-storage 1-1.2:1.0: USB Mass Storage device detected
  [    1.986081] scsi host1: usb-storage 1-1.2:1.0
  [    2.053779] usb 1-1.4: new high-speed USB device number 4 using ehci-brcm
  [    2.674845] EXT4-fs (mmcblk0p7): warning: maximal mount count reached, runnin   g e2fsck is recommended
  [    2.684540] EXT4-fs (mmcblk0p7): recovery complete
  [    2.689556] EXT4-fs (mmcblk0p7): mounted filesystem with journalled data mode   . Opts: data=journal
  [    2.698479] VFS: Mounted root (ext4 filesystem) on device 179:7.
  [    2.704884] devtmpfs: mounted
  [    2.708065] Freeing unused kernel memory: 304K (c0800000 - c084c000)
  [    2.984005] EXT4-fs (mmcblk0p7): re-mounted. Opts: nodelalloc,data=journal
  [    2.991893] usb-storage 1-1.2:1.0: Max LUN 17 is not valid, using 0 instead
  [    3.002602] scsi 1:0:0:0: CD-ROM            RTK      Driver Storage   1.00 PQ   : 0 ANSI: 0 CCS
  [    3.011890] scsi 1:0:0:0: Attached scsi generic sg0 type 5
  [    3.059152] sr 1:0:0:0: [sr0] scsi3-mmc drive: 0x/0x caddy
  [    3.064684] cdrom: Uniform CD-ROM driver Revision: 3.20
  [    3.080996] sr 1:0:0:0: Attached scsi CD-ROM sr0
  [    3.230773] usb 1-1.4: reset high-speed USB device number 4 using ehci-brcm
  [    3.324497] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 d   etected
  [    3.360496] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
  [    3.367890] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  [    3.368512] usbcore: registered new interface driver rt2800usb
  [    3.553186] random: dd urandom read with 34 bits of entropy available
  [    3.620958] procmk_init
  [    3.627581] bcm_event: module license 'Proprietary' taints kernel.
  [    3.633808] Disabling lock debugging due to kernel taint
  [    3.832785] nexus.ko: virtual irq: enabled (267)
  [    3.837488] nexus.ko: shared gpio banks: enabled
  [    6.904028] DVB: registering new adapter (_vuplus_zero4k_)
  [    7.377489] bcm7252s: hotplug_callback():
  [    7.377489] Hotplug - status.connected 1:0:1
  [    7.384640] bcm7252s: hotplug_callback():
  [    7.384640] Hotplug - connecting HDMI to display 0xe
  [    7.583754] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
  [    7.613789] [MPVR]: >> misc_pvr_init
  [    7.621397] [VID]: 6bcm7335_video_init
  [    7.625670] [AUD]: 6bcm7335_audio_init
  [    7.631230] [AUD]: >> bcm_audio_capture_init
  [    7.639840] qam=0, ofdm=0, satellite=1
  [    7.659432] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)   ...
  [    7.707058] input: dreambox advanced remote control (native) as /devices/virt   ual/input/input0
  [    7.721044] [LCD]: registered
  [    7.828862] [CI]: registered ci0
  [    8.977072] [CI]: CI interface initialised
  [    8.977072]
  [    8.988826] [DFP]: registered dbox fp
  [    8.995161] [SC]: registered sci0
  [    9.135757] system_time_set wakeup mode get
  [    9.199764] system_time_set wakeup mode get 0xc4
  [    9.524385] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmwa   re file 'rt2870.bin'
  [    9.534071] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detec   ted - version: 0.36
  [    9.933761] random: nonblocking pool is initialized
  [   11.045567] wlan0: authenticate with cc:be:59:f7:ef:a6
  [   11.076138] wlan0: send auth to cc:be:59:f7:ef:a6 (try 1/3)
  [   11.083650] wlan0: authenticated
  [   11.087762] wlan0: associate with cc:be:59:f7:ef:a6 (try 1/3)
  [   11.105636] wlan0: RX AssocResp from cc:be:59:f7:ef:a6 (capab=0x411 status=0    aid=4)
  [   11.120384] wlan0: associated
  [   12.112133] NET: Registered protocol family 10
  [   12.248496] Bluetooth: Core ver 2.20
  [   12.252151] NET: Registered protocol family 31
  [   12.256637] Bluetooth: HCI device and connection manager initialized
  [   12.265608] Bluetooth: HCI socket layer initialized
  [   12.271013] Bluetooth: L2CAP socket layer initialized
  [   12.276193] Bluetooth: SCO socket layer initialized
  [   13.174742] [VID]: VIDEO_SET_STREAMTYPE 1
  [   13.178938] [VID]: VIDEO_SELECT_SOURCE 1  0
  [   13.183375] [VID]: VIDEO_PLAY 1  5 0
  [   13.192539] [VID]: VIDEO_CONTINUE 1  1
  [   13.196438] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
  [   13.360558] [VID]: VIDEO_STOP 0  1
  [   13.364875] [VID]: VIDEO_SELECT_SOURCE 0  0
  [   16.420390] [AUD]: AUDIO_SET_MUTE 0
  [   16.425129] [AUD]: AUDIO_SET_MIXER -868254064
  [   16.429604] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
  [   16.434681] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
  [   16.441315] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
  [   22.593519] [AUD]: AUDIO_SET_MUTE 1
  [   22.853574] [AUD]: AUDIO_SET_MIXER -868254064
  [   22.858067] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
  [   22.863137] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
  [   22.870139] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
  [   23.720908] FE tune
  [   23.896531] [AUD]: AUDIO_SELECT_SOURCE 0
  [   23.901818] [AUD]: AUDIO_SET_BYPASS_MODE 1
  [   23.906017] [AUD]: downmix 0 state : 0
  [   23.909818] [AUD]: AUDIO_PAUSE 3
  [   23.913146] [AUD]: AUDIO_PLAY 3 decoder start : 0
  [   23.919174] [VID]: VIDEO_SELECT_SOURCE 0  0
  [   23.923425] [VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:1080
  [   23.930331] [VID]: VIDEO_GET_SIZE aspect: 1 6
  [   23.934730] [VID]: VIDEO_SET_STREAMTYPE 1
  [   23.938906] [VID]: VIDEO_FREEZE 3  0
  [   23.942499] [VID]: VIDEO_PLAY 3  5 2
  [   23.953691] [VID]: VIDEO_SLOWMOTION 0    1
  [   23.959261] [VID]: VIDEO_FAST_FORWARD 0    1 0
  [   23.966464] [VID]: VIDEO_CONTINUE 3  1
  [   23.973119] [AUD]: AUDIO_CONTINUE 3 1 aph=0xcb440400
  [   23.979599] [AUD]: Mute : 1
  [   23.983204] [AUD]: AUDIO_CHANNEL_SELECT 0
  [   24.971038] [VID]: VIDEO_STOP 1  1
  [   24.974571] [AUD]: AUDIO_STOP 0
  [   24.984143] [AUD]: AUDIO_CONTINUE 3 0 aph=0x0
  [   24.988532] [AUD]: AUDIO_CONTINUE aph=0 0 0
  [   26.252084] bcm7252s: hotplug_callback():
  [   26.252084] Hotplug - status.connected 0:1:0
  [   26.935762] >>cid=1, sid=0 r=0 s=0
  [   26.939201] ROLT
  [   27.108505] bcm7252s: hotplug_callback():
  [   27.108505] Hotplug - status.connected 1:0:2
  [   27.423761] >>cid=1, sid=0 r=2 s=0
  [   28.670761] >>cid=1, sid=0 r=2 s=0
  [   29.661763] >>cid=1, sid=0 r=2 s=0
  [   30.691777] >>cid=1, sid=0 r=2 s=0
  [   31.945775] >>cid=1, sid=0 r=2 s=0
  [   32.915772] >>cid=1, sid=0 r=2 s=0
  [   33.906765] >>cid=1, sid=0 r=2 s=0
  [   34.173504] bcm7252s: hotplug_callback():
  [   34.173504] Hotplug - status.connected 0:1:0
  [   34.915775] >>cid=1, sid=0 r=2 s=0
  [   35.030573] bcm7252s: hotplug_callback():
  [   35.030573] Hotplug - status.connected 1:0:2
  [   40.742771] >>cid=1, sid=0 r=2 s=0
  [   41.748762] >>cid=1, sid=0 r=2 s=0
  [   42.094884] bcm7252s: hotplug_callback():
  [   42.094884] Hotplug - status.connected 0:1:0
  [   42.236774] >>cid=1, sid=0 r=2 s=0
  [   42.254348] [AUD]: AUDIO_SET_MUTE 0
  [   42.951508] bcm7252s: hotplug_callback():
  [   42.951508] Hotplug - status.connected 1:0:2
  [   42.958700] bcm7252s: hotplug_callback():
  [   42.958700] Hotplug - connecting HDMI to display 0xf
  [   43.145926] FE tune
  [   43.319207] [AUD]: AUDIO_SELECT_SOURCE 0
  [   43.324715] [AUD]: AUDIO_SET_BYPASS_MODE 1
  [   43.328939] [AUD]: downmix 0 state : 0
  [   43.333076] [AUD]: AUDIO_PAUSE 3
  [   43.336428] [AUD]: AUDIO_PLAY 3 decoder start : 0
  [   43.342329] [VID]: VIDEO_SELECT_SOURCE 0  0
  [   43.346556] [VID]: VIDEO_SET_STREAMTYPE 1
  [   43.350793] [VID]: VIDEO_FREEZE 3  0
  [   43.354391] [VID]: VIDEO_PLAY 3  5 2
  [   43.365511] [VID]: VIDEO_SLOWMOTION 0    1
  [   43.371175] [VID]: VIDEO_FAST_FORWARD 0    1 0
  [   43.378527] [VID]: VIDEO_CONTINUE 3  1
  [   43.384987] [AUD]: AUDIO_CONTINUE 3 1 aph=0xcc37c580
  [   43.391457] [AUD]: Mute : 0
  [   43.400211] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
  [   43.406073] [VID]: VIDEO_GET_SIZE aspect: 1 0
  [   43.494759] >>cid=1, sid=0 r=2 s=0
  [   49.990090] [VID]: VIDEO_STOP 1  1
  [   49.993537] [AUD]: AUDIO_STOP 0
  [   50.021344] [AUD]: AUDIO_CONTINUE 3 0 aph=0x0
  [   50.025716] [AUD]: AUDIO_CONTINUE aph=0 0 0
  [   50.083325] FE tune
  [   50.256114] [AUD]: AUDIO_SELECT_SOURCE 0
  [   50.261594] [AUD]: AUDIO_SET_BYPASS_MODE 1
  [   50.265794] [AUD]: downmix 0 state : 0
  [   50.269699] [AUD]: AUDIO_PAUSE 3
  [   50.273030] [AUD]: AUDIO_PLAY 3 decoder start : 0
  [   50.278999] [VID]: VIDEO_SELECT_SOURCE 0  0
  [   50.283224] [VID]: VIDEO_SET_STREAMTYPE 1
  [   50.287410] [VID]: VIDEO_FREEZE 3  0
  [   50.291068] [VID]: VIDEO_PLAY 3  5 2
  [   50.302177] [VID]: VIDEO_SLOWMOTION 0    1
  [   50.307731] [VID]: VIDEO_FAST_FORWARD 0    1 0
  [   50.314979] [VID]: VIDEO_CONTINUE 3  1
  [   50.321706] [AUD]: AUDIO_CONTINUE 3 1 aph=0xce0f7000
  [   50.328223] [AUD]: Mute : 0
  [   50.336339] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
  [   50.342400] [VID]: VIDEO_GET_SIZE aspect: 1 0
  root@vuzero4k:~# openpli 7.3-release vuzero4k
  
  root@vuzero4k:~# dmesg-sh: openpli: not found
  root@vuzero4k:~#
  root@vuzero4k:~# vuzero4k login: root
  -sh: vuzero4k: not found
  root@vuzero4k:~# root@vuzero4k:~# dmesg
  -sh: root@vuzero4k:~#: not found
  root@vuzero4k:~# [    0.000000] Booting Linux on physical CPU 0x0
  sh: missing ]
  root@vuzero4k:~# [    0.000000] Linux version 4.1.20-1.9 (oe-user@oe-host) (gcc ver
  sion 6.3.0 (GC   C) ) #1 SMP Tue Jul 6 10:32:03 UTC 2021
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] CPU: ARMv7 Processor [420f1000] revision 0 (ARMv7),
  cr=30c5383d
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT alias
  ing instructio   n cache
  sh: missing ]
  root@vuzero4k:~# [    0.000000] Machine model: BCM972604USFF
  sh: missing ]
  root@vuzero4k:~# [    0.000000] moving dtb from 0x0000000007618000 to 0x00000000008
  cd5d0
  sh: missing ]
  root@vuzero4k:~# [    0.000000] bmem: Reserved 699 MiB at 0x0000000052500000
  sh: missing ]
  root@vuzero4k:~# [    0.000000] cma: Reserved 16 MiB at 0x0000000051400000
  sh: missing ]
  root@vuzero4k:~# [    0.000000] Forcing write-allocate cache policy for SMP
  sh: missing ]
  root@vuzero4k:~# [    0.000000] Memory policy: Data cache writealloc
  sh: missing ]
  root@vuzero4k:~# [    0.000000] On node 0 totalpages: 516096
  tash: missing ]
  root@vuzero4k:~# [    0.000000]   DMA zone: 512 pages used for memmap
  sh: missing ]
  root@vuzero4k:~# [    0.000000]   DMA zone: 0 pages reserved
  sh: missing ]
  root@vuzero4k:~# [    0.000000]   DMA zone: 65536 pages, LIFO batch:15
  sh: missing ]
  root@vuzero4k:~# [    0.000000]   HighMem zone: 450560 pages, LIFO batch:31
  sh: missing ]
  root@vuzero4k:~# [    0.000000] psci: probing for conduit method from DT.
  sh: missing ]
  root@vuzero4k:~# [    0.000000] psci: PSCIv0.2 detected in firmware.
  sh: missing ]
  root@vuzero4k:~# [    0.000000] psci: Using standard PSCI v0.2 function IDs
  sh: missing ]
  root@vuzero4k:~# [    0.000000] PERCPU: Embedded 12 pages/cpu @cefb9000 s16844 r819
  2 d24116 u4915   2
  sh: missing ]
  root@vuzero4k:~# [    0.000000] pcpu-alloc: s16844 r8192 d24116 u49152 alloc=12*409
  6
  sh: missing ]
  root@vuzero4k:~# [    0.000000] pcpu-alloc:
• 0
• 1
  ersh: missing ]
  root@vuzero4k:~# [    0.000000] Built 1 zonelists in Zone order, mobility grouping
  on.  Total pag   es: 515584
  sh: missing ]
  root@vuzero4k:~# [    0.000000] Kernel command line: root=/dev/mmcblk0p7 rootfstype
  =ext4 rootflag   s=data=journal rootwait rw coherent_pool=2M rw bmem=699m@1317m
  sh: missing ]
  root@vuzero4k:~# [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 1
  31072 bytes)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65
  536 bytes)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] Memory: 1306508K/2064384K available (6111K kernel c
  ode, 310K rwda   ta, 2044K rodata, 304K init, 197K bss, 741492K reserved, 16384K cm
  a-reserved, 10   70076K highmem)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] Virtual kernel memory layout:
  sh: missing ]
  root@vuzero4k:~# [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000]       .text : 0xc0008000 - 0xc07ff280   (8157 kB)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000]       .init : 0xc0800000 - 0xc084c000   ( 304 kB)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000]       .data : 0xc084c000 - 0xc0899bb0   ( 311 kB)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000]        .bss : 0xc089c000 - 0xc08cd5d0   ( 198 kB)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] Hierarchical RCU implementation.
  sh: missing ]
  root@vuzero4k:~# [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=
  2.
  sh: missing ]
  root@vuzero4k:~# [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_
  cpu_ids=2
  sh: missing ]
  root@vuzero4k:~# [    0.000000] NR_IRQS:16 nr_irqs:16 16
  sh: missing ]
  root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0802000
  , parent irq:    89)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0808000
  , parent irq:    61)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080aa00
  , parent irq:    62)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080c640
  , parent irq:    91)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080e200
  , parent irq:    57)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0810500
  , parent irq:    95)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0812400
  , parent irq:    96)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0814540
  , parent irq:    93)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0816440
  , parent irq:    94)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0818480
  , parent irq:    98)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] MCP: Enabling write pairing
  sh: missing ]
  root@vuzero4k:~# [    0.000000] Architected cp15 timer(s) running at 27.00MHz (phys
  ).
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000000] clocksource arch_sys_counter: mask: 0xfffffffffffff
  f max_cycles:    0x63a1e71a3, max_idle_ns: 440795203123 ns
  sh: missing ]
  root@vuzero4k:~# [    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wra
  ps every 43980   46511093ns
  sh: missing ]
  root@vuzero4k:~# [    0.000010] Switching to timer-based delay loop, resolution 37n
  s
  sh: missing ]
  root@vuzero4k:~# [    0.000370] Console: colour dummy device 80x30
  sh: missing ]
  root@vuzero4k:~# [    0.000388] Calibrating delay loop (skipped), value calculated
  using timer fr   equency.. 54.00 BogoMIPS (lpj=27000)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000396] pid_max: default: 32768 minimum: 301
  sh: missing ]
  root@vuzero4k:~# [    0.000487] Mount-cache hash table entries: 1024 (order: 0, 409
  6 bytes)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000492] Mountpoint-cache hash table entries: 1024 (order: 0
  , 4096 bytes)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.000844] CPU: Testing write buffer coherency: ok
  sh: missing ]
  root@vuzero4k:~# [    0.001047] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  sh: missing ]
  root@vuzero4k:~# [    0.001081] Setting up static identity map for 0x8480 - 0x84d8
  sh: missing ]
  root@vuzero4k:~# [    0.014843] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  sh: missing ]
  root@vuzero4k:~# [    0.014889] Brought up 2 CPUs
  sh: missing ]
  root@vuzero4k:~# [    0.014899] SMP: Total of 2 processors activated (108.00 BogoMI
  PS).
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.014903] CPU: All CPU(s) started in HYP mode.
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.014905] CPU: Virtualization extensions available.
  sh: missing ]
  root@vuzero4k:~# [    0.015176] devtmpfs: initialized
  sh: missing ]
  root@vuzero4k:~# [    0.022916] VFP support v0.3: implementor 42 architecture 3 par
  t 10 variant 0    rev 0
  sh: missing ]
  root@vuzero4k:~# [    0.023104] clocksource jiffies: mask: 0xffffffff max_cycles: 0
  xffffffff, max   _idle_ns: 1911260446275000 ns
  sh: missing ]
  root@vuzero4k:~# [    0.024135] NET: Registered protocol family 16
  sh: missing ]
  root@vuzero4k:~# [    0.025280] DMA: preallocated 2048 KiB pool for atomic coherent
  allocations
  sh: missing ]
  root@vuzero4k:~# [    0.029942] cpuidle: using governor ladder
  sh: missing ]
  root@vuzero4k:~# [    0.035951] cpuidle: using governor menu
  sh: missing ]
  root@vuzero4k:~# [    0.041260] No ATAGs?
  sh: missing ]
  root@vuzero4k:~# [    0.041294] hw-breakpoint: found 5 (+1 reserved) breakpoint and
  4 watchpoint    registers.
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.041301] hw-breakpoint: maximum watchpoint size is 8 bytes.
  sh: missing ]
  root@vuzero4k:~# [    0.041583] Broadcom Brahma-B15 readahead cache at: 0xd0aaa478
  sh: missing ]
  root@vuzero4k:~# [    0.052097] brcmstb-gpio f040a400.gpio: Registered 3 banks (GPI
  O(s): 0-95)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.052273] brcmstb-gpio f04174c0.gpio: Registered 2 banks (GPI
  O(s): 96-159)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.052597] SCSI subsystem initialized
  sh: missing ]
  root@vuzero4k:~# [    0.053216] libata version 3.00 loaded.
  sh: missing ]
  root@vuzero4k:~# [    0.053382] usbcore: registered new interface driver usbfs
  sh: missing ]
  root@vuzero4k:~# [    0.053419] usbcore: registered new interface driver hub
  sh: missing ]
  root@vuzero4k:~# [    0.053447] usbcore: registered new device driver usb
  sh: missing ]
  root@vuzero4k:~# [    0.053500] Linux video capture interface: v2.00
  sh: missing ]
  root@vuzero4k:~# [    0.053555] pps_core: LinuxPPS API ver. 1 registered
  xHCI sh: missing ]
  root@vuzero4k:~# [    0.053559] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
  Rodolfo Giome   tti <giometti@linux.it>
  -sh: syntax error: unexpected newline
  root@vuzero4k:~# [    0.053574] PTP clock support registered
  sh: missing ]
  root@vuzero4k:~# [    0.053926] Advanced Linux Sound Architecture Driver Initialize
  d.
  sh: missing ]
  root@vuzero4k:~# [    0.054749] Switched to clocksource arch_sys_counter
  sh: missing ]
  root@vuzero4k:~# [    0.054904] FS-Cache: Loaded
  sh: missing ]
  root@vuzero4k:~# [    0.060731] thermal thermal_zone0: failed to read out thermal z
  one (-22)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.060870] NET: Registered protocol family 2
  sh: missing ]
  root@vuzero4k:~# [    0.061247] TCP established hash table entries: 2048 (order: 1,
  8192 bytes)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.061264] TCP bind hash table entries: 2048 (order: 2, 16384
  bytes)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.061286] TCP: Hash tables configured (established 2048 bind
  2048)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.061325] UDP hash table entries: 256 (order: 1, 8192 bytes)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.061338] UDP-Lite hash table entries: 256 (order: 1, 8192 by
  tes)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.061447] NET: Registered protocol family 1
  sh: missing ]
  root@vuzero4k:~# [    0.061638] RPC: Registered named UNIX socket transport module.
  sh: missing ]
  root@vuzero4k:~# [    0.061641] RPC: Registered udp transport module.
  sh: missing ]
  root@vuzero4k:~# [    0.061644] RPC: Registered tcp transport module.
  sh: missing ]
  root@vuzero4k:~# [    0.061647] RPC: Registered tcp NFSv4.1 backchannel transport m
  odule.
  sh: missing ]
  root@vuzero4k:~# [    0.061660] PCI: CLS 0 bytes, default 64
  sh: missing ]
  root@vuzero4k:~# [    0.062032] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
  sh: missing ]
  root@vuzero4k:~# [    0.062054] hw perfevents: enabled with armv7_cortex_a15 PMU dr
  iver, 7 counte   rs available
  sh: missing ]
  root@vuzero4k:~# [    0.062827] futex hash table entries: 512 (order: 3, 32768 byte
  s)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.063689] NFS: Registering the id_resolver key type
  sh: missing ]
  root@vuzero4k:~# [    0.063711] Key type id_resolver registered
  sh: missing ]
  root@vuzero4k:~# [    0.063715] Key type id_legacy registered
  sh: missing ]
  root@vuzero4k:~# [    0.063726] nfs4filelayout_init: NFSv4 File Layout Driver Regis
  tering...
  sh: missing ]
  root@vuzero4k:~# [    0.063732] Installing knfsd (copyright (C) 1996 okir@monad.swb
  .de).
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.064169] fuse init (API version 7.23)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.064780] bounce: pool size: 64 pages
  sh: missing ]
  root@vuzero4k:~# [    0.064809] Block layer SCSI generic (bsg) driver version 0.4 l
  oaded (major 2   52)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.064817] io scheduler noop registered
  sh: missing ]
  root@vuzero4k:~# [    0.064823] io scheduler deadline registered
  sh: missing ]
  root@vuzero4k:~# [    0.064838] io scheduler cfq registered (default)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.065084] brcm-gisb-arb f0400000.gisb-arb: registered mem: d0
  aca000, irqs:    261, 262
  sh: missing ]
  root@vuzero4k:~# [    0.065633] brcmstb-sata-phy f0b10100.sata_phy: registered 1 po
  rt(s)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.065990] brcm-pci f0460000.pcie: adjusting to legacy (broken
  ) pcie DT
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.066043] brcm-pci f0460000.pcie: no identity map; PCI driver
  s may fail
  sh: missing ]
  -sh: PCI: not found
  root@vuzero4k:~# [    0.166173] brcm-pci f0460000.pcie: down
  sh: missing ]
  root@vuzero4k:~# [    0.167498] brcmstb_memc f1102000.memc-ddr: registered
  sh: missing ]
  root@vuzero4k:~# [    0.167683] brcm-waketimer f0417680.waketimer: registered, with
  irq 264
  sh: missing ]
  root@vuzero4k:~# [    0.167861] Serial: 8250/16550 driver, 4 ports, IRQ sharing dis
  abled
  sh: missing ]
  root@vuzero4k:~# [    0.168784] console [ttyS0] disabled
  sh: missing ]
  root@vuzero4k:~# [    0.168809] f040c000.serial: ttyS0 at MMIO 0xf040c000 (irq = 10
  0, base_baud =    5062500) is a 16550A
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.910515] console [ttyS0] enabled
  sh: missing ]
  root@vuzero4k:~# [    0.914332] f040d000.serial: ttyS1 at MMIO 0xf040d000 (irq = 10
  1, base_baud =    5062500) is a 16550A
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.923582] f040e000.serial: ttyS2 at MMIO 0xf040e000 (irq = 10
  2, base_baud =    5062500) is a 16550A
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    0.935574] loop: module loaded
  sh: missing ]
  root@vuzero4k:~# [    0.939409] brcm-ahci f0b12000.sata: controller can do ALPM, tu
  rning on CAP_A   LPM
  sh: missing ]
  root@vuzero4k:~# [    0.946826] brcm-ahci f0b12000.sata: masking port_map 0x1 -> 0x
  1
  sh: missing ]
  root@vuzero4k:~# [    0.952856] brcm-ahci f0b12000.sata: SSS flag set, parallel bus
  scan disabled
  sh: missing ]
  root@vuzero4k:~# [    0.970766] brcm-ahci f0b12000.sata: AHCI 0001.0300 32 slots 1
  ports 6 Gbps 0   x1 impl platform mode
  sh: missing ]
  root@vuzero4k:~# [    0.979748] brcm-ahci f0b12000.sata: flags: 64bit ncq sntf stag
  pm clo pmp sl   um part
  sh: missing ]
  root@vuzero4k:~# [    0.988259] scsi host0: brcm-ahci
  sh: missing ]
  root@vuzero4k:~# [    0.991722] ata1: SATA max UDMA/133 mmio [mem 0xf0b12000-0xf0b1
  299b] port 0x1   00 irq 87
  sh: missing ]
  root@vuzero4k:~# [    0.999657] brcm-ahci f0b12000.sata: Broadcom AHCI SATA3 regist
  ered
  sh: missing ]
  root@vuzero4k:~# [    1.007026] libphy: Fixed MDIO Bus: probed
  sh: missing ]
  root@vuzero4k:~# [    1.011508] bcmgenet f0480000.ethernet: GENET 5.0 EPHY: 0x0000
  sh: missing ]
  root@vuzero4k:~# [    1.017403] bcmgenet f0480000.ethernet: failed to get enet-mux
  clock
  sh: missing ]
  root@vuzero4k:~# [    1.036749] libphy: bcmgenet MII bus: probed
  sh: missing ]
  root@vuzero4k:~# [    1.060901] Broadcom BCM7260 f0480000.etherne:01: failed to req
  uest GPHY cloc   k
  sh: missing ]
  root@vuzero4k:~# [    1.068761] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    1.074604] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    1.080702] xhci-brcm: xHCI BRCM driver
  sh: missing ]
  root@vuzero4k:~# [    1.084708] ehci-brcm: EHCI BRCM driver
  sh: missing ]
  root@vuzero4k:~# [    1.102876] ehci-brcm f0b00300.ehci_v2: EHCI Host Controller
  sh: missing ]
  root@vuzero4k:~# [    1.104765] ata1: SATA down (SStatus 0 SControl 300)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    1.114054] ehci-brcm f0b00300.ehci_v2: new USB bus registered,
  assigned bus    number 1
  sh: missing ]
  root@vuzero4k:~# [    1.132033] ehci-brcm f0b00300.ehci_v2: irq 120, io mem 0xf0b00
  300
  sh: missing ]
  root@vuzero4k:~# [    1.143756] ehci-brcm f0b00300.ehci_v2: USB 2.0 started, EHCI 1
  .00
  sh: missing ]
  root@vuzero4k:~# [    1.150336] hub 1-0:1.0: USB hub found
  sh: missing ]
  root@vuzero4k:~# [    1.154108] hub 1-0:1.0: 1 port detected
  sh: missing ]
  root@vuzero4k:~# [    1.158296] ehci-brcm f0b00500.ehci_v2: EHCI Host Controller
  sh: missing ]
  root@vuzero4k:~# [    1.164045] ehci-brcm f0b00500.ehci_v2: new USB bus registered,
  assigned bus    number 2
  sh: missing ]
  root@vuzero4k:~# [    1.181995] ehci-brcm f0b00500.ehci_v2: irq 123, io mem 0xf0b00
  500
  sh: missing ]
  root@vuzero4k:~# [    1.193757] ehci-brcm f0b00500.ehci_v2: USB 2.0 started, EHCI 1
  .00
  sh: missing ]
  root@vuzero4k:~# [    1.200284] hub 2-0:1.0: USB hub found
  sh: missing ]
  root@vuzero4k:~# [    1.204053] hub 2-0:1.0: 1 port detected
  sh: missing ]
  root@vuzero4k:~# [    1.208281] ohci-brcm: OHCI BRCM driver
  sh: missing ]
  oroot@vuzero4k:~# [    1.212241] ohci-brcm f0b00400.ohci_v2: BRCM OHCI controller
  sh: missing ]
  root@vuzero4k:~# [    1.217996] ohci-brcm f0b00400.ohci_v2: new USB bus registered,
  assigned bus    number 3
  sh: missing ]
  root@vuzero4k:~# [    1.225917] ohci-brcm f0b00400.ohci_v2: irq 121, io mem 0xf0b00
  400
  sh: missing ]
  root@vuzero4k:~# [    1.287101] hub 3-0:1.0: USB hub found
  sh: missing ]
  root@vuzero4k:~# [    1.290875] hub 3-0:1.0: 1 port detected
  sh: missing ]
  root@vuzero4k:~# [    1.295031] ohci-brcm f0b00600.ohci_v2: BRCM OHCI controller
  sh: missing ]
  root@vuzero4k:~# [    1.300798] ohci-brcm f0b00600.ohci_v2: new USB bus registered,
  assigned bus    number 4
  sh: missing ]
  root@vuzero4k:~# [    1.309246] ohci-brcm f0b00600.ohci_v2: irq 124, io mem 0xf0b00
  600
  sh: missing ]
  root@vuzero4k:~# [    1.370097] hub 4-0:1.0: USB hub found
  sh: missing ]
  root@vuzero4k:~# [    1.373868] hub 4-0:1.0: 1 port detected
  sh: missing ]
  root@vuzero4k:~# [    1.378119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
  Driver
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    1.384669] ehci-pci: EHCI PCI platform driver
  sh: missing ]
  root@vuzero4k:~# [    1.389181] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Dri
  ver
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    1.395384] ohci-pci: OHCI PCI platform driver
  sh: missing ]
  root@vuzero4k:~# [    1.399961] usbcore: registered new interface driver usb-storag
  e
  sh: missing ]
  root@vuzero4k:~# [    1.406127] mousedev: PS/2 mouse device common for all mice
  sh: missing ]
  root@vuzero4k:~# [    1.412155] i2c /dev entries driver
  sh: missing ]
  root@vuzero4k:~# [    1.416331] IR NEC protocol handler initialized
  sh: missing ]
  root@vuzero4k:~# [    1.420877] IR RC5(x/sz) protocol handler initialized
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    1.425942] IR RC6 protocol handler initialized
  sh: missing ]
  root@vuzero4k:~# [    1.430484] IR JVC protocol handler initialized
  sh: missing ]
  root@vuzero4k:~# [    1.435027] IR Sony protocol handler initialized
  sh: missing ]
  root@vuzero4k:~# [    1.439657] IR SANYO protocol handler initialized
  sh: missing ]
  root@vuzero4k:~# [    1.444372] IR Sharp protocol handler initialized
  sh: missing ]
  root@vuzero4k:~# [    1.449088] IR MCE Keyboard/mouse protocol handler initialized
  sh: missing ]
  root@vuzero4k:~# [    1.454934] IR XMP protocol handler initialized
  sh: missing ]
  root@vuzero4k:~# [    1.459797] brcmstb_thermal f04d1500.thermal: registered AVS TM
  ON of-sensor d   river
  sh: missing ]
  root@vuzero4k:~# [    1.467634] usb 1-1: new high-speed USB device number 2 using e
  hci-brcm
  sh: missing ]
  root@vuzero4k:~# [    1.504913] brcmstb-avs-cpufreq f04c4000.avs-cpu-data-mem: regi
  stered
  sh: missing ]
  root@vuzero4k:~# [    1.511597] sdhci: Secure Digital Host Controller Interface dri
  ver
  sh: missing ]
  root@vuzero4k:~# [    1.517791] sdhci: Copyright(c) Pierre Ossman
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    1.522162] sdhci-pltfm: SDHCI platform and OF driver helper
  sh: missing ]
  root@vuzero4k:~# [    1.529054] sdhci-brcmstb f0200200.sdhci: No vmmc regulator fou
  nd
  sh: missing ]
  root@vuzero4k:~# [    1.535161] sdhci-brcmstb f0200200.sdhci: No vqmmc regulator fo
  und
  sh: missing ]
  root@vuzero4k:~# [    1.571756] mmc0: SDHCI controller on f0200200.sdhci [f0200200.
  sdhci] using A   DMA
  sh: missing ]
  root@vuzero4k:~# [    1.581399] usbcore: registered new interface driver usbhid
  sh: missing ]
  root@vuzero4k:~# [    1.586988] usbhid: USB HID core driver
  sh: missing ]
  root@vuzero4k:~# [    1.594276] NET: Registered protocol family 17
  sh: missing ]
  root@vuzero4k:~# [    1.598848] Key type dns_resolver registered
  sh: missing ]
  root@vuzero4k:~# [    1.603267] Registering SWP/SWPB emulation handler
  sh: missing ]
  root@vuzero4k:~# [    1.612608] ALSA device list:
  sh: missing ]
  root@vuzero4k:~# [    1.615595]   No soundcards found.
  sh: missing ]
  root@vuzero4k:~# [    1.619227] hub 1-1:1.0: USB hub found
  sh: missing ]
  root@vuzero4k:~# [    1.624193] hub 1-1:1.0: 4 ports detected
  sh: missing ]
  root@vuzero4k:~# [    1.632964] Waiting for root device /dev/mmcblk0p7...
  sh: missing ]
  root@vuzero4k:~# [    1.667426] mmc0: MAN_BKOPS_EN bit is not set
  sh: missing ]
  root@vuzero4k:~# [    1.678016] mmc0: new high speed MMC card at address 0001
  sh: missing ]
  root@vuzero4k:~# [    1.683631] mmcblk0: mmc0:0001 4FTE4R 3.64 GiB
  sh: missing ]
  root@vuzero4k:~# [    1.688219] mmcblk0boot0: mmc0:0001 4FTE4R partition 1 4.00 MiB
  sh: missing ]
  etroot@vuzero4k:~# [    1.694192] mmcblk0boot1: mmc0:0001 4FTE4R partition 2 4.00 MiB
  sh: missing ]
  root@vuzero4k:~# [    1.700161] mmcblk0rpmb: mmc0:0001 4FTE4R partition 3 512 KiB
  sh: missing ]
  root@vuzero4k:~# [    1.708568]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
  sh: missing ]
  E 1
  [ root@vuzero4k:~# [    1.739348] EXT4-fs: Warning: mounting with data=journal disabl
  es delayed all   ocation and O_DIRECT support!
  sh: missing ]
  root@vuzero4k:~# [    1.896777] usb 1-1.2: new high-speed USB device number 3 using
  ehci-brcm
  sh: missing ]
  root@vuzero4k:~# [    1.979114] usb-storage 1-1.2:1.0: USB Mass Storage device dete
  cted
  sh: missing ]
  root@vuzero4k:~# [    1.986081] scsi host1: usb-storage 1-1.2:1.0
  sh: missing ]
  root@vuzero4k:~# [    2.053779] usb 1-1.4: new high-speed USB device number 4 using
  ehci-brcm
  sh: missing ]
  root@vuzero4k:~# [    2.674845] EXT4-fs (mmcblk0p7): warning: maximal mount count r
  eached, runnin   g e2fsck is recommended
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    2.684540] EXT4-fs (mmcblk0p7): recovery complete
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    2.689556] EXT4-fs (mmcblk0p7): mounted filesystem with journa
  lled data mode   . Opts: data=journal
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    2.698479] VFS: Mounted root (ext4 filesystem) on device 179:7
  .
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    2.704884] devtmpfs: mounted
  sh: missing ]
  root@vuzero4k:~# [    2.708065] Freeing unused kernel memory: 304K (c0800000 - c084
  c000)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    2.984005] EXT4-fs (mmcblk0p7): re-mounted. Opts: nodelalloc,d
  ata=journal
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    2.991893] usb-storage 1-1.2:1.0: Max LUN 17 is not valid, usi
  ng 0 instead
  sh: missing ]
  root@vuzero4k:~# [    3.002602] scsi 1:0:0:0: CD-ROM            RTK      Driver Sto
  rage   1.00 PQ   : 0 ANSI: 0 CCS
  sh: missing ]
  root@vuzero4k:~# [    3.011890] scsi 1:0:0:0: Attached scsi generic sg0 type 5
  sh: missing ]
  root@vuzero4k:~# [    3.059152] sr 1:0:0:0: [sr0] scsi3-mmc drive: 0x/0x caddy
  sh: missing ]
  root@vuzero4k:~# [    3.064684] cdrom: Uniform CD-ROM driver Revision: 3.20
  sh: missing ]
  root@vuzero4k:~# [    3.080996] sr 1:0:0:0: Attached scsi CD-ROM sr0
  sh: missing ]
  root@vuzero4k:~# [    3.230773] usb 1-1.4: reset high-speed USB device number 4 usi
  ng ehci-brcm
  sh: missing ]
  root@vuzero4k:~# [    3.324497] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 53
  90, rev 0502 d   etected
  sh: missing ]
  root@vuzero4k:~# [    3.360496] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 53
  70 detected
  sh: missing ]
  root@vuzero4k:~# [    3.367890] ieee80211 phy0: Selected rate control algorithm 'mi
  nstrel_ht'
  sh: missing ]
  root@vuzero4k:~# [    3.368512] usbcore: registered new interface driver rt2800usb
  sh: missing ]
  root@vuzero4k:~# [    3.553186] random: dd urandom read with 34 bits of entropy ava
  ilable
  sh: missing ]
  root@vuzero4k:~# [    3.620958] procmk_init
  88sh: missing ]
  root@vuzero4k:~# [    3.627581] bcm_event: module license 'Proprietary' taints kern
  el.
  sh: missing ]
  root@vuzero4k:~# [    3.633808] Disabling lock debugging due to kernel taint
  sh: missing ]
  root@vuzero4k:~# [    3.832785] nexus.ko: virtual irq: enabled (267)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    3.837488] nexus.ko: shared gpio banks: enabled
  sh: missing ]
  root@vuzero4k:~# [    6.904028] DVB: registering new adapter (_vuplus_zero4k_)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    7.377489] bcm7252s: hotplug_callback():
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    7.377489] Hotplug - status.connected 1:0:1
  sh: missing ]
  root@vuzero4k:~# [    7.384640] bcm7252s: hotplug_callback():
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    7.384640] Hotplug - connecting HDMI to display 0xe
  sh: missing ]
  root@vuzero4k:~# [    7.583754] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
  sh: missing ]
  root@vuzero4k:~# [    7.613789] [MPVR]: >> misc_pvr_init
  sh: missing ]
  root@vuzero4k:~# [    7.621397] [VID]: 6bcm7335_video_init
  sh: missing ]
  root@vuzero4k:~# [    7.625670] [AUD]: 6bcm7335_audio_init
  sh: missing ]
  root@vuzero4k:~# [    7.631230] [AUD]: >> bcm_audio_capture_init
  sh: missing ]
  root@vuzero4k:~# [    7.639840] qam=0, ofdm=0, satellite=1
  sh: missing ]
  root@vuzero4k:~# [    7.659432] BRCM brcm_dvb0: DVB: registering adapter 0 frontend
  0 (Vuplus FE)   ...
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    7.707058] input: dreambox advanced remote control (native) as
  /devices/virt   ual/input/input0
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [    7.721044] [LCD]: registered
  sh: missing ]
  root@vuzero4k:~# [    7.828862] [CI]: registered ci0
  sh: missing ]
  root@vuzero4k:~# [    8.977072] [CI]: CI interface initialised
  sh: missing ]
  root@vuzero4k:~# [    8.977072]
  sh: missing ]
  root@vuzero4k:~# [    8.988826] [DFP]: registered dbox fp
  sh: missing ]
  root@vuzero4k:~# [    8.995161] [SC]: registered sci0
  sh: missing ]
  root@vuzero4k:~# [    9.135757] system_time_set wakeup mode get
  sh: missing ]
  root@vuzero4k:~# [    9.199764] system_time_set wakeup mode get 0xc4
  sh: missing ]
  root@vuzero4k:~# [    9.524385] ieee80211 phy0: rt2x00lib_request_firmware: Info -
  Loading firmwa   re file 'rt2870.bin'
  sh: missing ]
  root@vuzero4k:~# [    9.534071] ieee80211 phy0: rt2x00lib_request_firmware: Info -
  Firmware detec   ted - version: 0.36
  sh: missing ]
  root@vuzero4k:~# [    9.933761] random: nonblocking pool is initialized
  sh: missing ]
  root@vuzero4k:~# [   11.045567] wlan0: authenticate with cc:be:59:f7:ef:a6
  sh: missing ]
  root@vuzero4k:~# [   11.076138] wlan0: send auth to cc:be:59:f7:ef:a6 (try 1/3)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [   11.083650] wlan0: authenticated
  sh: missing ]
  root@vuzero4k:~# [   11.087762] wlan0: associate with cc:be:59:f7:ef:a6 (try 1/3)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [   11.105636] wlan0: RX AssocResp from cc:be:59:f7:ef:a6 (capab=0
  x411 status=0    aid=4)
  -sh: syntax error: unexpected "("
  root@vuzero4k:~# [   11.120384] wlan0: associated
  sh: missing ]
  root@vuzero4k:~# [   12.112133] NET: Registered protocol family 10
  sh: missing ]
  root@vuzero4k:~# [   12.248496] Bluetooth: Core ver 2.20
  sh: missing ]
  root@vuzero4k:~# [   12.252151] NET: Registered protocol family 31
  sh: missing ]
  root@vuzero4k:~# [   12.256637] Bluetooth: HCI device and connection manager initia
  lized
  sh: missing ]
  root@vuzero4k:~# [   12.265608] Bluetooth: HCI socket layer initialized
  sh: missing ]
  root@vuzero4k:~# [   12.271013] Bluetooth: L2CAP socket layer initialized
  sh: missing ]
  root@vuzero4k:~# [   12.276193] Bluetooth: SCO socket layer initialized
  sh: missing ]
  root@vuzero4k:~# [   13.174742] [VID]: VIDEO_SET_STREAMTYPE 1
  sh: missing ]
  root@vuzero4k:~# [   13.178938] [VID]: VIDEO_SELECT_SOURCE 1  0
  sh: missing ]
  root@vuzero4k:~# [   13.183375] [VID]: VIDEO_PLAY 1  5 0
  sh: missing ]
  root@vuzero4k:~# [   13.192539] [VID]: VIDEO_CONTINUE 1  1
  sh: missing ]
  root@vuzero4k:~# [   13.196438] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
  sh: missing ]
  root@vuzero4k:~# [   13.360558] [VID]: VIDEO_STOP 0  1
  sh: missing ]
  root@vuzero4k:~# [   13.364875] [VID]: VIDEO_SELECT_SOURCE 0  0
  sh: missing ]
  root@vuzero4k:~# [   16.420390] [AUD]: AUDIO_SET_MUTE 0
  sh: missing ]
  root@vuzero4k:~# [   16.425129] [AUD]: AUDIO_SET_MIXER -868254064
  sh: missing ]
  root@vuzero4k:~# [   16.429604] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
  sh: missing ]
  root@vuzero4k:~# [   16.434681] [AUD]: AUDIO_SET_MIXER : next left volume 0, right
  volume 0
  sh: missing ]
  root@vuzero4k:~# [   16.441315] [AUD]: AUDIO_SET_MIXER : next left volume -70, righ
  t volume -70
  sh: missing ]
  root@vuzero4k:~# [   22.593519] [AUD]: AUDIO_SET_MUTE 1
  sh: missing ]
  root@vuzero4k:~# [   22.853574] [AUD]: AUDIO_SET_MIXER -868254064
  sh: missing ]
  root@vuzero4k:~# [   22.858067] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
  sh: missing ]
  root@vuzero4k:~# [   22.863137] [AUD]: AUDIO_SET_MIXER : next left volume -70, righ
  t volume -70
  sh: missing ]
  root@vuzero4k:~# [   22.870139] [AUD]: AUDIO_SET_MIXER : next left volume -70, righ
  t volume -70
  sh: missing ]
  root@vuzero4k:~# [   23.720908] FE tune
  sh: missing ]
  root@vuzero4k:~# [   23.896531] [AUD]: AUDIO_SELECT_SOURCE 0
  sh: missing ]
  root@vuzero4k:~# [   23.901818] [AUD]: AUDIO_SET_BYPASS_MODE 1
  sh: missing ]
  root@vuzero4k:~# [   23.906017] [AUD]: downmix 0 state : 0
  sh: missing ]
  root@vuzero4k:~# [   23.909818] [AUD]: AUDIO_PAUSE 3
  sh: missing ]
  root@vuzero4k:~# [   23.913146] [AUD]: AUDIO_PLAY 3 decoder start : 0
  sh: missing ]
  root@vuzero4k:~# [   23.919174] [VID]: VIDEO_SELECT_SOURCE 0  0
  sh: missing ]
  root@vuzero4k:~# [   23.923425] [VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:
  1920 h:1080
  sh: missing ]
  root@vuzero4k:~# [   23.930331] [VID]: VIDEO_GET_SIZE aspect: 1 6
  sh: missing ]
  root@vuzero4k:~# [   23.934730] [VID]: VIDEO_SET_STREAMTYPE 1
  sh: missing ]
  root@vuzero4k:~# [   23.938906] [VID]: VIDEO_FREEZE 3  0
  sh: missing ]
  root@vuzero4k:~# [   23.942499] [VID]: VIDEO_PLAY 3  5 2
  sh: missing ]
  root@vuzero4k:~# [   23.953691] [VID]: VIDEO_SLOWMOTION 0    1
  sh: missing ]
  root@vuzero4k:~# [   23.959261] [VID]: VIDEO_FAST_FORWARD 0    1 0
  sh: missing ]
  root@vuzero4k:~# [   23.966464] [VID]: VIDEO_CONTINUE 3  1
  sh: missing ]
  root@vuzero4k:~# [   23.973119] [AUD]: AUDIO_CONTINUE 3 1 aph=0xcb440400
  sh: missing ]
  root@vuzero4k:~# [   23.979599] [AUD]: Mute : 1
  sh: missing ]
  root@vuzero4k:~# [   23.983204] [AUD]: AUDIO_CHANNEL_SELECT 0
  sh: missing ]
  root@vuzero4k:~# [   24.971038] [VID]: VIDEO_STOP 1  1
  sh: missing ]
  root@vuzero4k:~# [   24.974571] [AUD]: AUDIO_STOP 0
  sh: mis