tvfaq Community

AB IPBox => AB IPBox ресиверы с Android TV => Тема розпочата: cdma від 15 Квітень 2022, 20:22:40

Назва: Як змінити софт (прошивка) в AB IPBox / How to change software in AB IPBox
Відправлено: cdma від 15 Квітень 2022, 20:22:40
Після розпакування файлу ви одержите наступні файли:
a.) - update.zip-full-ABTWO-2022xxxx - після оновлення цього файлу всі налаштування приймача будуть очищені скиданням до заводських налаштувань
б.) - update.zip-normal-ABTWO-2022xxxx - після оновлення цього файлу всі налаштування приймача будуть збережені
c.) - update.zip-simple-ABTWO-2022xxxx - після оновлення цього файлу буде встановлено oscam ,а також live tv/menu/cam.

Файл c.) потрібно встановити в другу чергу.
Це означає, що спочатку потрібно встановити або файл a.) або b.), потім можна встановити файл c.).

Існують дві різновидності процедури оновлення:

Перший спосіб:
Перейменуйте бажаний файл зі списку вище на «update.zip» і скопіюйте його в корінь USB.
Підключіть USB до приймача та відкрийте налаштування Android (шестірня в правому верхньому куті панелі запуску Android)/оновлення USB і виберіть підключений пристрій USB. Приймач перезавантажиться та почнеться оновлення.

Другий спосіб:
Перейменуйте потрібний файл зі списку вище на «update.zip» і скопіюйте його в корінь USB.
Підключіть USB до вимкненого від від живлення приймача. Підключіть приймач до джерела живлення та постійно натискайте кнопку «ОК» пульта RCU допоки на дисплеї не з’явиться повідомлення «Оновлення».
Приймач почне оновлюватися.

Як налаштувати конфігураційні файли oscam за допомогою служби samba:

- відкрийте провідник на своєму ПК і введіть IP-адресу вашого приймача, наприклад, \\192.168.1.1 і натисніть Enter
- буде показано папку "ab", знову натисніть Enter
- ви побачите папки вашого приймача, файли конфігурації oscam можна знайти у папці "oscam"
Примітка: Змінюйте oscam файли лише тоді, коли ви знаєте, що робите. Зміни можна відобразити у підменю приймача Cam.


After unpacking the file you will get these files:
a.) - update.zip-full-ABTWO-2022xxxx - after update this file, all the box data will be cleared like factory reset
b.) - update.zip-normal-ABTWO-2022xxxx - after update this file, all the box data will be kept
c.) - update.zip-simple-ABTWO-2022xxxx - after update this file, oscam and the live tv/menu/cam will be installed.
This c.) file needs to be installed as the second one.
It means that the file a.) or b.) firstly must be installed, then the c.) can be installed.

Update procedures:

First procedure:
Rename your preferred file from the list above to "update.zip" and copy it to USB root.
Connect the USB to the working box and open Android Settings (gear wheel on the rigth top corner in the Android launcher)/USB update
and choose the connected USB memory. The box will restart and start updating.



Second procedure: 
Rename your prefered file from the list above to "update.zip" and copy it to USB root.
Connect the USB to the turned off box from the power. Connect the box to the power and keep repeatly pressing the "OK" button of the RCU
until you will see "Updating" message on the display.
The box will start updating.

How to adjust oscam config files by the samba service:

- open explorer program in your PC and type IP address of your box e.g."\\192.168.1.1" and press enter
- "ab" folder will be shown, press enter
- you willl see the folders of your box, oscam config files can be found in the "oscam" folder
Notice: Please change the oscam files only when you know what are you doing. The changes can be shown in the submenu "Cam".
Назва: Re: Як змінити софт (прошивка) в AB IPBox / How to change software in AB IPBox
Відправлено: cdma від 16 Червень 2022, 16:01:42
Відосик