Вы выставили, наверное, неправильную скорость передачи данных, потому как там одни кракозябры. Выставляйте скорость обмена данными 115200 бод.
Да я вроде выставляю уже на автомате , вот скачал что выложил от axashistwin и открыл в нотепаде
Sorry but you are not allowed to view spoiler contents.
вот от atto_turing
[spoiler]=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.04.10 11:35:41 =~=~=~=~=~=~=~=~=~=~=~=
System st X.WWHшDDRS
Xls Version: v1.4.2
Reg Time: 2018/11/09 14:27:36
Reg Name: hi3716m41dma_hi3716mv410_ddr3_512mbyte_16bit_2layers_nand.reg
Relocate Boot to DDR
Jump to DDR
Fastboot 3.3.0 (root@) (May 07 2019 - 16:40:17)
Fastboot: Version 3.3.0
Build Date: May 7 2019, 16:41:06
CPU: Hi3716Mv410
Boot Media: NAND
DDR Size: 512MB
Found flash memory controller hifmc100.
Nand ID: 0xAD 0xDA 0x90 0x95 0x46 0xAD 0xDA 0x90
Nand: Hynix NAND 256MiB 3,3V 8-bit
Nand(HW-Auto): Block:128KB Page:2KB OOB:64B ECC:4bit/512 Chip:256MB*1
Net: upWarning: failed to set MAC address
, downWarning: failed to set MAC address
Boot Env on NAND
Env Offset: 0x00100000
Env Size: 0x00010000
Env Range: 0x00010000
SDK Version: HiSTBLinuxV100R005C00SPC060_20180714
et16315_HI_KEYLED_Open
keyled repeat init
Read length is too large, paratition size: 0x00040000, read offset: 0x00000000. Try to read 0x00040000 instead!
request to read 0x00080000, and read 0x00040000 successfully!
Loader_Main
mac:00:11:ad:87:49:d5
keyled repeat init
keyled repeat init
> keyled_display_addr_inc: 265
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
u32KeyId = 0x0
bNeedUpgrade is 0
Reserve Memory
Start Addr: 0x1FFFE000
Bound Addr: 0x8CF4000
Free Addr: 0x1F055000
Alloc Block: Addr Size
0x1FBFD000 0x400000
0x1F8FC000 0x300000
0x1F8F9000 0x2000
0x1F878000 0x80000
0x1F579000 0x2FE000
0x1F1F3000 0x385000
0x1F1EF000 0x3000
0x1F059000 0x195000
0x1F055000 0x3000
Press Ctrl+C to stop autoboot
NAND read: device 0 offset 0xc00000, size 0x800000
pure data length is 8388608, len_incl_bad is 8388608
request to read 0x800000, and read 0x800000 successfully!
8388608 bytes read: OK
## Booting kernel from Legacy Image at 01000000 ...
Image Name: Linux-4.4.35
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4176627 Bytes = 4 MiB
Load Address: 02000000
Entry Point: 02000000
Verifying Checksum ... OK
Loading Kernel Image from 0x16777280 to 0x33554432 ... OK
OK
ATAGS [0x00000100 - 0x0000040C], 780Bytes
Starting kernel ...
Booting Linux on physical CPU 0x0
Linux version 4.4.35 (oe-user@oe-host) (gcc version 10.2.0 (GCC) ) #1 Tue Apr 6 00:17:21 UTC 2021
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
initmrd: found no initmrd.
Machine model: Hisilicon
cma: Reserved 176 MiB at 0x14000000
cma: Reserved 4 MiB at 0x1fc00000
Memory policy: Data cache writeback
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: console=ttyAMA0,115200 root=ubi0:rootfs rw ubi.mtd=9,2048 rootfstype=ubifs rootwait mtdparts=hinand:1M(boot),512K(bootargs),256K(baseparam),256K(pqparam),1M(logo),512K(deviceinfo),512K(softwareinfo),8M(loader),8M(kernel),-(rootfs) mem=512M mmz=ddr,0,0,256M
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 319916K/524288K available (6057K kernel code, 552K rwdata, 1592K rodata, 376K init, 255K bss, 20052K reserved, 184320K cma-reserved, 0K highmem)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbe800000 - 0xbfe00000 ( 22 MB)
.text : 0xc0008000 - 0xc05f2778 (6058 kB)
.init : 0xc07fc000 - 0xc085a000 ( 376 kB)
.data : 0xc085a000 - 0xc08e4218 ( 553 kB)
.bss : 0xc08e4218 - 0xc0924200 ( 256 kB)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:352
clocksource: hisp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
Console: colour dummy device 80x30
Calibrating delay loop... 1949.69 BogoMIPS (lpj=974848)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
ftrace: allocating 20740 entries in 61 pages
Setting up static identity map for 0x8200 - 0x8258
CPU: hi3716mv410
L2C: DT/platform modifies aux control register: 0x72050001 -> 0x72440001
L2C: DT/platform tries to modify or specify cache size
L2C-310 enabling early BRESP for Cortex-A9
L2C-310: enabling full line of zeros but not enabled in Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 256 kB
L2C-310: CACHE_ID 0x410000c9, AUX_CTRL 0x76440001
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Serial: AMBA PL011 UART driver
f8b00000.uart: ttyAMA0 at MMIO 0xf8b00000 (irq = 22, base_baud = 0) is a PL011 rev2
console [ttyAMA0] enabled
f8b02000.uart: ttyAMA1 at MMIO 0xf8b02000 (irq = 23, base_baud = 0) is a PL011 rev2
pl061_gpio f8b20000.gpio0: PL061 GPIO chip @0xf8b20000 registered
pl061_gpio f8b21000.gpio1: PL061 GPIO chip @0xf8b21000 registered
pl061_gpio f8b22000.gpio2: PL061 GPIO chip @0xf8b22000 registered
pl061_gpio f8b23000.gpio3: PL061 GPIO chip @0xf8b23000 registered
pl061_gpio f8b24000.gpio4: PL061 GPIO chip @0xf8b24000 registered
pl061_gpio f8004000.gpio5: PL061 GPIO chip @0xf8004000 registered
pl061_gpio f8b26000.gpio6: PL061 GPIO chip @0xf8b26000 registered
pl061_gpio f8b27000.gpio7: PL061 GPIO chip @0xf8b27000 registered
pl061_gpio f8b28000.gpio8: PL061 GPIO chip @0xf8b28000 registered
pl061_gpio f8b29000.gpio9: PL061 GPIO chip @0xf8b29000 registered
pl061_gpio f8b2a000.gpio10: PL061 GPIO chip @0xf8b2a000 registered
SCSI subsystem initialized
ssp-pl022 f8b1a000.spi: ARM PL022 driver, device ID: 0x00041022
ssp-pl022 f8b1a000.spi: mapped registers from 0xf8b1a000 to f9b1a000
spi_master spi0: will run message pump with realtime priority
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource hisp804
FS-Cache: Loaded
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NetWinder Floating Point Emulator V0.97 (double precision)
futex hash table entries: 256 (order: -1, 3072 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2. (NAND) В© 2001-2006 Red Hat, Inc.
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
hiahci-phy: registered new sata phy driver
hiahci-phy-hi3716mv420: registered new sata phy driver
hiahci-phy-hi3716mv420: failed to create PHY, -38
hiahci-phy-hi3716mv420: probe of f9900000.hiahci-phy failed with error -38
brd: module loaded
loop: module loaded
hifmc100: registerd new interface driver hifmc100.
hifmc100: Found flash memory controller hifmc100.
hifmc100: no found spi-nor device.
nand: id: 0xAD 0xDA 0x90 0x95 0x46 0xAD 0xDA 0x90
nand: device found, Manufacturer ID: 0xad, Chip ID: 0xda
nand: Hynix NAND 256MiB 3,3V 8-bit
nand: Block:128KB Page:2KB OOB:64B ECC:4bits/512 Chip:256MB
flashcache: initialize nand flash cache feature.
flashstats: Create nand flash statistics interface.
flashstats: nand:-read,-write,-erase,-ecc,
10 cmdlinepart partitions found on MTD device hinand
Creating 10 MTD partitions on "hinand":
0x000000000000-0x000000100000 : "boot"
0x000000100000-0x000000180000 : "bootargs"
0x000000180000-0x0000001c0000 : "baseparam"
0x0000001c0000-0x000000200000 : "pqparam"
0x000000200000-0x000000300000 : "logo"
0x000000300000-0x000000380000 : "deviceinfo"
0x000000380000-0x000000400000 : "softwareinfo"
0x000000400000-0x000000c00000 : "loader"
0x000000c00000-0x000001400000 : "kernel"
0x000001400000-0x000010000000 : "rootfs"
mtd-regop: Create nand register operation interface, buffer size:4096
hifmc100: no found spi-nand device.
libphy: himii: probed
hi_eth: attached port 0 PHY 2 to driver Generic PHY
usbcore: registered new interface driver asix
usbcore: registered new interface driver ax88179_178a
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver dm9601
usbcore: registered new interface driver net1080
usbcore: registered new interface driver cdc_subset
usbcore: registered new interface driver zaurus
usbcore: registered new interface driver cdc_ncm
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
i2c /dev entries driver
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
sp805-wdt f8a2c000.watchdog: registration successful
usbcore: registered new interface driver snd-usb-audio
oprofile: no performance counters
oprofile: using timer interrupt.
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 17
Key type dns_resolver registered
ubi0: attaching mtd9
ubi0: scanning is finished
ubi0: attached mtd9 (name "rootfs", size 236 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 1888, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 70/43, WL threshold: 128, image sequence number: 1526933173
ubi0: available PEBs: 0, total reserved PEBs: 1888, PEBs reserved for bad PEB handling: 40
ALSA device list:
No soundcards found.
ubi0: background thread "ubi_bgt0d" started, PID 691
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 693
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 232747008 bytes (221 MiB, 1833 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 77619BB1-194B-4315-8B7E-496CF640C403, small LPT model
VFS: Mounted root (ubifs filesystem) on device 0:14.
devtmpfs: mounted
Freeing unused kernel memory: 376K (c07fc000 - c085a000)
This architecture does not have kernel memory protection.
INIT: version 2.99 booting
Starting fake hwclock: loading system time.
Tue Apr 6 07:45:30 UTC 2021
dinobot start!!!
Load hi_media.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:34:03])
Load hi_mmz.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:34:05])
random: nonblocking pool is initialized
virtual device initialization.
Load hi_common.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:34:07])
Load hi_pq.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:36:29])
Load hi_cipher.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:35:31])
Load hi_hdmi.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 26 2019, 15:05:37])
Load hi_vou.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:37:03])
Load hi_gpio.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:35:49])
Load hi_gpioi2c.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:36:08])
Load hi_i2c.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:36:09])
Load hi_tde.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:36:40])
Load hi_otp.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:36:20])
[06:17:07:093 ERROR-HI_HDMI]:ParseTimingDetailed2Standaed[882]:PixelClk: 25175 >74250 Interlace:1 ,Pixel:12ddb0
Load hi_demux.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:35:33])
Load hi_adec.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:34:57])
Load hi_vfmw.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:36:51])
Load hi_vpss.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:37:19])
---HDMI kernel event(no UserCallBack): HOTPLUG. ---
Load hi_vdec.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:36:46])
Load hi_adsp.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:34:58])
Load hi_aiao.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:35:05])
Load hi_tuner.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jul 15 2019, 21:53:56])
Load hi_fb.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:36:03])
Load hi_ir.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:36:10])
Load hi_jpegdec.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:36:14])
Load hi_png.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:36:25])
Load hi_advca.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:35:00])
Load hi_keyled.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Aug 28 2020, 14:14:44])
Smartcard driver (sci)
Version 4.00 (c) 2016-2017 Honza Petrous
scifi: register /dev/sci0
Load hi_vi.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:36:53])
Load hi_pmoc.ko success. (SDK_VERSION: [HiSTBLinuxV100R005C00SPC060_20180714] Build Time: [Jun 21 2019, 15:36:22])
read des data length = 1024
des_decrypt is ok
tar is ok
hidemux: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (firedtv)
-->0xf8a21080:0x134
tunerport 0 demodtype 256 284
xx u32tunerId -->0
@@@@@@@@@@@@@@@***********************
(NULL device *): DVB: registering adapter 0 frontend 0 (DVB-C NIM)...
fdtv_dvb_register success
vmalloc av mem success [0xe5f0a000]!!!
input: dreambox advanced remote control (native) as /devices/virtual/input/input0
!!!!!!!!!!!!!!drvFP_init!!!!!!!!!!!!!!!!!
input: dreambox front panel as /devices/virtual/input/input1
1-->0xf8000044:0x380008
WriteRegister u32RegAddr:0xf8000044, VirAddr:0xf9000044
2-->0xf8000044:0x380000
1-->44 :0x0
2-->44 :0x1
!!index 1 is empty!
insmod is ok
2u32KeyId 1 0
./load: line 46: /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq: No such file or directory
./load: line 47: /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor: No such file or directory
./load: line 48: /sys/devices/system/cpu/cpufreq/interactive/timer_rate: No such file or directory
fuse init (API version 7.23)
Fuse filesystem already available.
Mounting fuse control filesystem.
2u32KeyId 1 1
RTL871X: module init start
RTL871X: rtl8192eu v4.4.1_17696.20160509_BTCOEX20160412-0042
RTL871X: build time: Apr 6 2021 02:31:24
RTL871X: rtl8192eu BT-Coex version = BTCOEX20160412-0042
usbcore: registered new interface driver rtl8192eu
RTL871X: module init ret=0
ehci-platform: EHCI generic platform driver
ehci-platform f9890000.ehci: EHCI Host Controller
ehci-platform f9890000.ehci: new USB bus registered, assigned bus number 1
ehci-platform f9890000.ehci: irq 30, io mem 0xf9890000
ehci-platform f9890000.ehci: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
ohci-platform f9880000.ohci: Generic Platform OHCI controller
ohci-platform f9880000.ohci: new USB bus registered, assigned bus number 2
ohci-platform f9880000.ohci: irq 31, io mem 0xf9880000
2u32KeyId 1 1
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
model=turing
brand=dinobot
platform=u43
visionversion=10.2
visionrevision=r381
visionlanguage=extralanguage
developername=Ednaz
feedsurl=http://ednaz.tvfaq.net/openvision-10.2
distro=openvision
oe=master
kernel=4.4.35
python=2.7.18
mediaservice=enigma2-plugin-systemplugins-servicehisilicon
multilib=False
architecture=cortexa9hf-neon
socfamily=hisi3716mv410
blindscanbinary=dinobot-blindscan
rctype=0
rcname=turing
rcidnum=2
smallflash=False
middleflash=False
imagedir=atto/turing
imagefs= ubi
mtdbootfs=
mtdrootfs=mtd9
mtdkernel=mtd8
rootfile=rootfs.ubi
kernelfile=uImage
mkubifs=-F -m 2048 -e 126976 -c 3840
ubinize=-m 2048 -p 128KiB
forcemode=no
compiledate=20210406
fpu=hard
displaytype= 7segment
transcoding=False
multitranscoding=True
hdmi=True
yuv=False
rca=True
avjack=False
scart=False
dvi=False
svideo=False
hdmihdin=False
hdmifhdin=False
wol=False
ci=False
vfdsymbol=False
fhdskin=True
Starting udev
2u32KeyId 1 1
usb 1-1: new high-speed USB device number 2 using ehci-platform
udevd[1030]: starting version 3.2.10
udevd[1031]: starting eudev-3.2.10
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
2u32KeyId 1 1
usb 1-2: new high-speed USB device number 3 using ehci-platform
usb-storage 1-2:1.0: USB Mass Storage device detected
scsi host0: usb-storage 1-2:1.0
usb 1-1.3: new high-speed USB device number 4 using ehci-platform
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
scsi 0:0:0:0: Direct-Access SanDisk Cruzer Force 1.00 PQ: 0 ANSI: 6
sd 0:0:0:0: [sda] 31260672 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
2u32KeyId 1 1
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
Multiboot flag tool by Persian Prince for Open Vision information module.
Multiboot detected!
Different distro name!
Set multiboot flag to 1 for etc file
Installed on internal flash, correct distro name.
Set multiboot flag to 0 for etc file
2u32KeyId 1 1
2u32KeyId 1 1
daemon on duty!
2u32KeyId 1 1
2u32KeyId 1 1
ALSA: Restoring mixer settings...
2u32KeyId 1 1
/usr/sbin/alsactl: load_state:1735: No soundcards found...
Starting stb hwclock: loading system time.
INIT: Entering runlevel: 3
Configuring network interfaces... 2u32KeyId 1 1
udhcpc: option -h NAME is deprecated, use -x hostname:NAME
udhcpc: started, v1.33.0
udhcpc: sending discover
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
videomode-->720p
enSpdifMode 0 enHdmiMode 0
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AC33.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DTSS.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.TRUEHD.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AMRWB.codec.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.Mp3.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.MP2.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AAC.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DOLBYTRUEHD.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DRA.decode.so2u32KeyId 1 1
success
HI_UNF_AVPLAvideomode_preferred setting
Y_RegisterAcodecLib libHA.AUDIO.TRUEHDPASSTHROUGH.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AMRNB.codec.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.WMA.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.COOK.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.G711.codec.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DTSHD.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DTSM6.decode.so failed
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.DTSPASSTHROUGH.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.AC3PASSTHROUGH.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.PCM.decode.so success
HI_UNF_AVPLAY_RegisterAcodecLib libHA.AUDIO.BLURAYLPCM.decode.so succeshisi com_size 100
s
--- Get HDMI event: HOTPLUG. ---
support fmt 1080p
support fmt 1080p50
support fmt 1080p30
support fmt 1080p24
support fmt 1080i
support fmt 1080i50
support fmt 720p
support fmt 720p50
support fmt 576p
support fmt 480p
support fmt pal
support fmt ntsc
hisi_player_init!!!
no keyled at app
hisi_platform_init success
file is 23
box_hostname is turing
ѕ --
update_box_type:: u43
auth_func ###############
get_dev_update_info [4 1 131072]:{1 u43 ---------- }
update_box_type ok u43
canAuth.ckcrc : 827241409
canAuth.bakcrc : 827241409
CustomerKey Chip Id:
c1 b3 4e 31 d3 dc d4 8a 47 78 d2 00 3c d7 11 82
generateCompareData Chip Id:
d3 dc d4 8a 47 78 d2 00 3c d7 11 82 c9 6e de 80
canAuth.chipcrc : 827241409
[authorization] canAuth is ok
[authorization] ret : 1
authorization is ok
main.c 282 check mac
VdecType 0 length 151078 [0 0 1 b3]
index:2 avtype:1 decord:2 demux:-1 status:1 hdec:2490368 hSync:4325376
[06:17:14:389 ERROR-HI_SYNC]:HI_MPI_SYNC_SetAttr[559]:para pstSyncAttr->enSyncRef is no-support.
[06:17:14:390 ERROR-HI_AVPLAY]:AVPLAY2u32KeyId 1 1
_SetSyncAttr[9153]:HI_MPI_SYNC_SetAttr fyyyyyyyyyyyyyyyyy
ailed 0x80320007-->video start
index:2 avtype:1 decord:2 demux:-1 status:3 hdec:2490368 hSync:4325376
FIREDTV_VIDEO_PLAY
Esplay flush stream:::2
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
udhcpc: sending discover
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
udhcpc: sending discover
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
udhcpc: no lease, forking to background
2u32KeyId 1 1
NET: Registered protocol family 10
IPv6: ADDRCONF(NETDEV_UP): eth0:
is not ready
2u32KeyId 1 1
done.
Starting system message bus: dbus.
Starting Dropbear SSH server: dropbear.
Starting rpcbind daemon...done.
2u32KeyId 1 1
starting statd: done
Starting automount: 2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
done.
Starting internet superserver: inetd.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
starting 8 nfsd kernel threads: done
starting mountd: done
exportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "*:/media/hdd".
Assuming default behaviour ('no_subtree_check').
NOTE: this default has changed since nfs-utils version 1.0.x
exportfs: Failed to stat /media/hdd: No such file o2u32KeyId 1 1
r directory
Starting syslogd/klogd: done
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
...done.
Starting Streamproxy: 2u32KeyId 1 1
streamproxy.
Starting crond: OK
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
2u32KeyId 1 1
line 1674 ? 00:00:00 showifra2u3
