Сборки имиджей от foxbob.

[ВИД-57]

Борис, приветствую. По сборке для hd-51. При загрузке - черный экран. Наверное лого тяжеловатое для него. Заменил на более легкое (твоя картинка где лодка в лучах заката) стало отображаться. При попытке зайти в настройки аудио/видео - креш. После установки e-tools в плагины не зайдешь - сразу креш. Возможно потому что он только под пли? А у тебя не совсем чисто пли? Удалил - все наладилось. Заинтересовал впн менеджер с фида. На атв я смотрю ютуб через него. Установился, настроился но... не заработал. Решил проверить работу впн на имидже атв. Мультибут сработал отлично. Проверил впн - работа стабильная на атв. А вот вернуться назад в твою сборку не получилось. Вечный boot. Поэтому нет крешлогов, все на словах. Может на что-то влияет работа интернета? В моих "палестинах" мало что скорость отвратительная, так еще и не разберешь что и за что блокируется. Например уже с неделю вход на форум атв возможен только с включенным впн....

[foxbob]

Отсутствие обратной связи,отбивает всякое желание что-то делать.Отсутствие ресивера не даёт мне возможности проверить.Все эти логи положите в папку и дайте её мне.E-tools есть на фиде и прекрасно работает.

[ВИД-57]

Борис, во-первых огромное спасибо за работу. Меньше всего я хотел как-то обидеть человека за его же труд. А во-вторых, я не смог сохранить лог так как перегружался на первый имидж (ATV), а вернуться в твою сборку уже не смог, застыл на перезагрузке и пришлось перепрошивать с нуля. Снова установил первым ATV, сейчас установлю сборку и попробую все с начала. Будут креши - буду сразу лог переносить на комп.

[ВИД-57]

Установил, выполнил первоначальные настройки. Загрузочное лого не отображается. Заменю. Настройка - Система - Аудио и Видео - Аудио/видео настройки и поймал креш. Три раза прокрешило, логи есть. Вот первый

Spoiler

OpenPLi Enigma2 crash log

crashdate=РЎР± РЅРѕСЏ 16 22:53:03 2024
compiledate=Nov 16 2024
skin=PLi-FullHD/skin.xml
sourcedate=2024-11-16
branch=develop
rev=a0968bd
component=Enigma2

model=hd51
imageversion=GCC-14.2
imagebuild=20241116

kernelcmdline=root=/dev/mmcblk0p8 rootsubdir=linuxrootfs3 kernel=/dev/mmcblk0p5 rw rootwait hd51_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200

nimsockets:
NIM Socket 0:
   Type: DVB-S2
   Name: AVL6211
   Has_Outputs: yes
   Frontend_Device: 0
   I2C_Device: 4



el 3.
20:19:49.8844 [eServicePeer] REMOVE Peer hd51
20:19:49.8872 [eServicePeer] REMOVE Peer hd51
20:19:49.8874 [eServicePeer] REMOVE Peer hd51
20:20:22.0109 Traceback (most recent call last):
20:20:22.0113   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
20:20:22.0114   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
20:20:22.0115 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
20:20:22.0118
During handling of the above exception, another exception occurred:

20:20:22.0119 Traceback (most recent call last):
20:20:22.0120   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
20:20:22.0121   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
20:20:22.0122 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:23:16.0041 Traceback (most recent call last):
22:23:16.0044   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:23:16.0045   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:23:16.0046 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:23:16.0047
During handling of the above exception, another exception occurred:

22:23:16.0048 Traceback (most recent call last):
22:23:16.0049   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:23:16.0049   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:23:16.0050 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:23:19.9876 Traceback (most recent call last):
22:23:19.9879   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:23:19.9880   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:23:19.9881 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:23:19.9882
During handling of the above exception, another exception occurred:

22:23:19.9882 Traceback (most recent call last):
22:23:19.9884   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:23:19.9884   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:23:19.9885 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:23:23.6975 Traceback (most recent call last):
22:23:23.6978   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:23:23.6979   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:23:23.6980 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:23:23.6981
During handling of the above exception, another exception occurred:

22:23:23.6981 Traceback (most recent call last):
22:23:23.6982   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:23:23.6983   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:23:23.6983 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:23:26.3056 Traceback (most recent call last):
22:23:26.3059   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:23:26.3059   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:23:26.3060 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:23:26.3061
During handling of the above exception, another exception occurred:

22:23:26.3061 Traceback (most recent call last):
22:23:26.3063   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:23:26.3063   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:23:26.3064 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:23:30.6235 Traceback (most recent call last):
22:23:30.6238   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:23:30.6239   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:23:30.6240 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:23:30.6240
During handling of the above exception, another exception occurred:

22:23:30.6241 Traceback (most recent call last):
22:23:30.6242   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:23:30.6243   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:23:30.6244 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:23:45.4931 [eServicePeer] REMOVE Peer hd51
22:23:45.5374 [eServicePeer] REMOVE Peer hd51
22:24:00.4708 Traceback (most recent call last):
22:24:00.4715   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:24:00.4715   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:24:00.4717 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:24:00.4718
During handling of the above exception, another exception occurred:

22:24:00.4718 Traceback (most recent call last):
22:24:00.4720   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:24:00.4720   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:24:00.4721 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:24:03.6754 Traceback (most recent call last):
22:24:03.6757   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:24:03.6758   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:24:03.6759 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:24:03.6759
During handling of the above exception, another exception occurred:

22:24:03.6760 Traceback (most recent call last):
22:24:03.6761   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:24:03.6762   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:24:03.6762 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:24:55.0756 Traceback (most recent call last):
22:24:55.0759   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:24:55.0760   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:24:55.0761 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:24:55.0762
During handling of the above exception, another exception occurred:

22:24:55.0762 Traceback (most recent call last):
22:24:55.0763   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:24:55.0764   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:24:55.0765 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:25:26.1192 Traceback (most recent call last):
22:25:26.1195   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:25:26.1196   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:25:26.1197 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:25:26.1198
During handling of the above exception, another exception occurred:

22:25:26.1198 Traceback (most recent call last):
22:25:26.1200   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:25:26.1200   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:25:26.1201 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:26:00.9071 Traceback (most recent call last):
22:26:00.9074   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:26:00.9074   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:26:00.9075 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:26:00.9076
During handling of the above exception, another exception occurred:

22:26:00.9077 Traceback (most recent call last):
22:26:00.9078   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:26:00.9079   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:26:00.9079 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:26:10.1975 Traceback (most recent call last):
22:26:10.1978   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:26:10.1979   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:26:10.1980 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:26:10.1981
During handling of the above exception, another exception occurred:

22:26:10.1981 Traceback (most recent call last):
22:26:10.1982   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:26:10.1983   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:26:10.1984 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:26:43.6309 Traceback (most recent call last):
22:26:43.6315   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:26:43.6316   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:26:43.6317 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:26:43.6318
During handling of the above exception, another exception occurred:

22:26:43.6319 Traceback (most recent call last):
22:26:43.6320   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:26:43.6321   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:26:43.6321 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:27:40.6660 Traceback (most recent call last):
22:27:40.6663   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:27:40.6663   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:27:40.6664 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:27:40.6665
During handling of the above exception, another exception occurred:

22:27:40.6666 Traceback (most recent call last):
22:27:40.6667   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:27:40.6668   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:27:40.6668 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:27:52.9069 Traceback (most recent call last):
22:27:52.9072   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:27:52.9073   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:27:52.9074 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:27:52.9074
During handling of the above exception, another exception occurred:

22:27:52.9075 Traceback (most recent call last):
22:27:52.9077   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:27:52.9077   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:27:52.9078 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:28:33.3385 Traceback (most recent call last):
22:28:33.3388   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:28:33.3388   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:28:33.3389 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:28:33.3390
During handling of the above exception, another exception occurred:

22:28:33.3391 Traceback (most recent call last):
22:28:33.3392   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:28:33.3392   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:28:33.3393 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:51:29.3212 Traceback (most recent call last):
22:51:29.3216   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:51:29.3216   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:51:29.3217 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:51:29.3218
During handling of the above exception, another exception occurred:

22:51:29.3219 Traceback (most recent call last):
22:51:29.3220   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:51:29.3220   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:51:29.3221 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:52:39.6432 Traceback (most recent call last):
22:52:39.6435   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:52:39.6436   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:52:39.6437 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:52:39.6438
During handling of the above exception, another exception occurred:

22:52:39.6438 Traceback (most recent call last):
22:52:39.6440   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:52:39.6440   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:52:39.6441 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:52:55.9629 Traceback (most recent call last):
22:52:55.9632   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:52:55.9633   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:52:55.9633 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:52:55.9634
During handling of the above exception, another exception occurred:

22:52:55.9635 Traceback (most recent call last):
22:52:55.9636   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:52:55.9637   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:52:55.9638 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:52:57.3654 Traceback (most recent call last):
22:52:57.3657   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:52:57.3658   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:52:57.3658 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:52:57.3659
During handling of the above exception, another exception occurred:

22:52:57.3660 Traceback (most recent call last):
22:52:57.3661   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:52:57.3662   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:52:57.3662 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:53:00.6784 Traceback (most recent call last):
22:53:00.6787   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:53:00.6787   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:53:00.6788 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:53:00.6789
During handling of the above exception, another exception occurred:

22:53:00.6789 Traceback (most recent call last):
22:53:00.6791   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:53:00.6791   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:53:00.6792 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:53:03.0378 Traceback (most recent call last):
22:53:03.0419   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 309, in action
22:53:03.0420   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 279, in action
22:53:03.0420   File "/usr/lib/enigma2/python/Screens/Menu.py", line 134, in okbuttonClick
22:53:03.0421   File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 11, in __call__
22:53:03.0421   File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/plugin.py", line 284, in videoSetupMain
22:53:03.0422   File "/usr/lib/enigma2/python/StartEnigma.py", line 167, in open
    dialog = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
                                   ~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:03.0422   File "/usr/lib/enigma2/python/StartEnigma.py", line 106, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
           ~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:03.0423   File "/usr/lib/enigma2/python/StartEnigma.py", line 128, in doInstantiateDialog
    dialog = screen(self, *arguments, **kwargs)  # Create dialog.
22:53:03.0423   File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/plugin.py", line 46, in __init__
22:53:03.0424   File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/plugin.py", line 143, in createSetup
22:53:03.0424   File "/usr/lib/enigma2/python/Components/config.py", line 2228, in __getattr__
22:53:03.0425 AttributeError: autovolumelevel
22:53:03.0427 [ePyObject] (CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap object at 0xae7b9c30>>,('OkCancelActions', 'ok')) failed)


dmesg

<6>[    0.000000] Booting Linux on physical CPU 0x0
<5>[    0.000000] Linux version 4.10.12 (oe-user@oe-host) (gcc version 14.2.0 (GCC) ) #1 SMP Wed Apr 26 13:58:00 UTC 2017
<6>[    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
<6>[    0.000000] CPU: div instructions available: patching division code
<6>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[    0.000000] OF: fdt:Machine model: BCM97251SSV
<6>[    0.000000] cma: Reserved 440 MiB at 0x0000000014800000
<6>[    0.000000] cma: Reserved 192 MiB at 0x0000000030000000
<6>[    0.000000] Memory policy: Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 262144
<7>[    0.000000] free_area_init_node: node 0, pgdat c0925dc0, node_mem_map d3e1c000
<7>[    0.000000]   Normal zone: 1728 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 196608 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 65536 pages, LIFO batch:15
<6>[    0.000000] percpu: Embedded 14 pages/cpu @d3ddd000 s26764 r8192 d22388 u57344
<7>[    0.000000] pcpu-alloc: s26764 r8192 d22388 u57344 alloc=14*4096
<7>[    0.000000] pcpu-alloc:

• 0
• 1

<6>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260416
<5>[    0.000000] Kernel command line: root=/dev/mmcblk0p8 rootsubdir=linuxrootfs3 kernel=/dev/mmcblk0p5 rw rootwait hd51_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Memory: 380544K/1048576K available (6707K kernel code, 361K rwdata, 1796K rodata, 352K init, 222K bss, 20864K reserved, 647168K cma-reserved, 65536K highmem)
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
<5>[    0.000000]     vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc0695180   (6709 kB)
<5>[    0.000000]       .init : 0xc0884000 - 0xc08dc000   ( 352 kB)
<5>[    0.000000]       .data : 0xc08dc000 - 0xc09365b8   ( 362 kB)
<5>[    0.000000]        .bss : 0xc0938000 - 0xc096f8ac   ( 223 kB)
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000]    Build-time adjustment of leaf fanout to 32.
<6>[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
<6>[    0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0805000, parent irq: 16)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0807000, parent irq: 17)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0809640, parent irq: 18)
<6>[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf080b200, parent irq: 19)
<6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
<6>[    0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xf080d380, parent IRQ(s): 3)
<6>[    0.000000] brcmstb: biuctrl: MCP: Write pairing already disabled
<6>[    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>[    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
<6>[    0.000010] Switching to timer-based delay loop, resolution 37ns
<6>[    0.000274] Console: colour dummy device 80x30
<6>[    0.000295] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[    0.000304] pid_max: default: 32768 minimum: 301
<6>[    0.000408] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000416] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000872] CPU: Testing write buffer coherency: ok
<6>[    0.001118] CPU0: update cpu_capacity 1024
<6>[    0.001125] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.001333] Setting up static identity map for 0x8440 - 0x8498
<6>[    0.003384] smp: Bringing up secondary CPUs ...
<6>[    0.004094] CPU1: update cpu_capacity 1024
<6>[    0.004098] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.004161] smp: Brought up 1 node, 2 CPUs
<6>[    0.004172] SMP: Total of 2 processors activated (108.00 BogoMIPS).
<6>[    0.004177] CPU: All CPU(s) started in SVC mode.
<6>[    0.004578] devtmpfs: initialized
<6>[    0.010581] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[    0.010779] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[    0.010795] futex hash table entries: 512 (order: 3, 32768 bytes)
<6>[    0.024055] NET: Registered protocol family 16
<6>[    0.024443] DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>[    0.029389] cpuidle: using governor ladder
<6>[    0.033336] cpuidle: using governor menu
<6>[    0.042449] No ATAGs?
<6>[    0.042552] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.042560] hw-breakpoint: maximum watchpoint size is 8 bytes.
<5>[    0.057830] SCSI subsystem initialized
<7>[    0.058129] libata version 3.00 loaded.
<6>[    0.058341] usbcore: registered new interface driver usbfs
<6>[    0.058388] usbcore: registered new interface driver hub
<6>[    0.058427] usbcore: registered new device driver usb
<6>[    0.058485] Linux cec interface: v0.10
<6>[    0.058526] Linux video capture interface: v2.00
<6>[    0.058594] pps_core: LinuxPPS API ver. 1 registered
<6>[    0.058600] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[    0.058619] PTP clock support registered
<6>[    0.059182] Advanced Linux Sound Architecture Driver Initialized.
<6>[    0.059768] clocksource: Switched to clocksource arch_sys_counter
<5>[    0.059960] FS-Cache: Loaded
<6>[    0.066022] NET: Registered protocol family 2
<6>[    0.066406] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
<6>[    0.066448] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>[    0.066521] TCP: Hash tables configured (established 8192 bind 8192)
<6>[    0.066605] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.066630] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.066739] NET: Registered protocol family 1
<6>[    0.067082] RPC: Registered named UNIX socket transport module.
<6>[    0.067086] RPC: Registered udp transport module.
<6>[    0.067090] RPC: Registered tcp transport module.
<6>[    0.067093] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[    0.067101] PCI: CLS 0 bytes, default 64
<6>[    0.068066] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
<6>[    0.069496] workingset: timestamp_bits=14 max_order=18 bucket_order=4
<5>[    0.070104] NFS: Registering the id_resolver key type
<5>[    0.070126] Key type id_resolver registered
<5>[    0.070130] Key type id_legacy registered
<6>[    0.070141] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[    0.070391] fuse init (API version 7.26)
<6>[    0.072323] bounce: pool size: 64 pages
<6>[    0.072367] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
<6>[    0.072375] io scheduler noop registered
<6>[    0.072380] io scheduler deadline registered
<6>[    0.072409] io scheduler cfq registered (default)
<6>[    0.072685] brcm-gisb-arb f0400000.gisb-arb: registered mem: f0a09000, irqs: 47, 48
<6>[    0.073074] brcm-sata-phy f0458100.sata-phy: registered 1 port(s)
<6>[    0.073430] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
<6>[    0.074080] brcm-cma brcm-cma.0: Added CMA device @ PA=0x14800000 LEN=0x1b800000
<6>[    0.074555] brcm-cma brcm-cma.1: Added CMA device @ PA=0x30000000 LEN=0xc000000
<6>[    0.108486] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[    0.110020] console [ttyS0] disabled
<6>[    0.110057] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 34, base_baud = 5062500) is a 16550A
<6>[    0.789247] console [ttyS0] enabled
<6>[    0.793288] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 35, base_baud = 5062500) is a 16550A
<6>[    0.802616] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 36, base_baud = 5062500) is a 16550A
<6>[    0.818698] brd: module loaded
<6>[    0.825492] loop: module loaded
<3>[    0.829475] OF: /rdb/sata@f045a000/sata-port@0: could not get #phy-cells for /rdb/sata-phy@f0458100
<4>[    0.838645] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x1
<6>[    0.844718] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
<6>[    0.861955] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl platform mode
<6>[    0.870935] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
<6>[    0.880061] scsi host0: brcm-ahci
<6>[    0.883658] scsi host1: brcm-ahci
<6>[    0.887139] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 44
<6>[    0.895070] ata2: DUMMY
<6>[    0.897530] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
<6>[    0.904464] libphy: Fixed MDIO Bus: probed
<6>[    0.908875] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
<6>[    0.926759] libphy: bcmgenet MII bus: probed
<6>[    0.953734] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
<6>[    0.959589] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[    0.983552] ehci-brcm: EHCI BRCM driver
<6>[    0.987519] ehci-brcm f0470300.ehci: EHCI Host Controller
<6>[    0.992952] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus number 1
<6>[    1.010649] ehci-brcm f0470300.ehci: irq 147, io mem 0xf0470300
<6>[    1.019250] ata1: SATA down (SStatus 0 SControl 300)
<6>[    1.022767] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
<6>[    1.023314] hub 1-0:1.0: USB hub found
<6>[    1.023337] hub 1-0:1.0: 1 port detected
<6>[    1.023624] ehci-brcm f0470500.ehci: EHCI Host Controller
<6>[    1.023637] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus number 2
<6>[    1.033749] ehci-brcm f0470500.ehci: irq 148, io mem 0xf0470500
<6>[    1.038760] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
<6>[    1.039240] hub 2-0:1.0: USB hub found
<6>[    1.039282] hub 2-0:1.0: 1 port detected
<6>[    1.039504] ohci-brcm: OHCI BRCM driver
<6>[    1.039666] ohci-brcm f0470400.ohci: BRCM OHCI controller
<6>[    1.039679] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus number 3
<6>[    1.039770] ohci-brcm f0470400.ohci: irq 149, io mem 0xf0470400
<6>[    1.098176] hub 3-0:1.0: USB hub found
<6>[    1.101962] hub 3-0:1.0: 1 port detected
<6>[    1.106128] ohci-brcm f0470600.ohci: BRCM OHCI controller
<6>[    1.111554] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus number 4
<6>[    1.119213] ohci-brcm f0470600.ohci: irq 150, io mem 0xf0470600
<6>[    1.181140] hub 4-0:1.0: USB hub found
<6>[    1.184921] hub 4-0:1.0: 1 port detected
<6>[    1.189037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.195591] ehci-pci: EHCI PCI platform driver
<6>[    1.200100] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[    1.206303] ohci-pci: OHCI PCI platform driver
<6>[    1.211090] xhci-hcd f0471000.xhci: xHCI Host Controller
<6>[    1.216435] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 5
<6>[    1.224131] xhci-hcd f0471000.xhci: hcc params 0x0250f17d hci version 0x100 quirks 0x00010010
<6>[    1.232699] xhci-hcd f0471000.xhci: irq 151, io mem 0xf0471000
<6>[    1.239149] hub 5-0:1.0: USB hub found
<3>[    1.242939] hub 5-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[    1.250208] xhci-hcd f0471000.xhci: xHCI Host Controller
<6>[    1.255549] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 6
<6>[    1.263129] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[    1.271602] hub 6-0:1.0: USB hub found
<6>[    1.275384] hub 6-0:1.0: 2 ports detected
<6>[    1.279722] usbcore: registered new interface driver uas
<6>[    1.285122] usbcore: registered new interface driver usb-storage
<6>[    1.291501] mousedev: PS/2 mouse device common for all mice
<6>[    1.297368] i2c /dev entries driver
<6>[    1.301137] IR NEC protocol handler initialized
<6>[    1.305691] IR RC5(x/sz) protocol handler initialized
<6>[    1.310755] IR RC6 protocol handler initialized
<6>[    1.315301] IR JVC protocol handler initialized
<6>[    1.319843] IR Sony protocol handler initialized
<6>[    1.324472] IR SANYO protocol handler initialized
<6>[    1.329188] IR Sharp protocol handler initialized
<6>[    1.333906] IR MCE Keyboard/mouse protocol handler initialized
<6>[    1.339752] IR XMP protocol handler initialized
<6>[    1.344299] smssdio: Siano SMS1xxx SDIO driver
<6>[    1.348754] smssdio: Copyright Pierre Ossman
<6>[    1.353424] sdhci: Secure Digital Host Controller Interface driver
<6>[    1.359623] sdhci: Copyright(c) Pierre Ossman
<6>[    1.363992] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[    1.372157] usb 1-1: new high-speed USB device number 2 using ehci-brcm
<6>[    1.393946] hub 1-1:1.0: USB hub found
<6>[    1.397866] hub 1-1:1.0: 4 ports detected
<6>[    1.414768] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
<6>[    1.422332] hidraw: raw HID events driver (C) Jiri Kosina
<6>[    1.427944] usbcore: registered new interface driver usbhid
<6>[    1.433538] usbhid: USB HID core driver
<6>[    1.437451] usb 2-1: new high-speed USB device number 2 using ehci-brcm
<6>[    1.446641] NET: Registered protocol family 17
<5>[    1.451164] Key type dns_resolver registered
<6>[    1.455494] ThumbEE CPU extension supported.
<5>[    1.459784] Registering SWP/SWPB emulation handler
<6>[    1.472384] usb-storage 2-1:1.0: USB Mass Storage device detected
<6>[    1.472592] ALSA device list:
<6>[    1.472595]   No soundcards found.
<3>[    1.472630] Warning: unable to open an initial console.
<6>[    1.473062] Freeing unused kernel memory: 352K
<4>[    1.473063] This architecture does not have kernel memory protection.
<6>[    1.501906] scsi host2: usb-storage 2-1:1.0
<6>[    1.575205] mmc0: new high speed MMC card at address 0001
<6>[    1.580972] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
<6>[    1.585652] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
<6>[    1.591706] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
<6>[    1.597781] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
<4>[    1.606643] GPT:disk_guids don't match.
<4>[    1.610502] GPT:partition_entry_array_crc32 values don't match: 0xad6ef3a1 != 0x4a2b850b
<4>[    1.618607] GPT: Use GNU Parted to correct GPT errors.
<6>[    1.623774]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
<6>[    1.642257] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
<6>[    1.703779] usb 1-1.1: new full-speed USB device number 3 using ehci-brcm
<5>[    1.738577] random: fast init done
<4>[    1.951194] hd51_1: loading out-of-tree module taints kernel.
<6>[    1.958188] usbcore: registered new interface driver tpm
<5>[    2.529242] scsi 2:0:0:0: Direct-Access              USB FLASH DRIVE  PMAP PQ: 0 ANSI: 0 CCS
<5>[    2.538655] sd 2:0:0:0: Attached scsi generic sg0 type 0
<5>[    2.547800] sd 2:0:0:0: [sda] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB)
<5>[    2.557537] sd 2:0:0:0: [sda] Write Protect is off
<7>[    2.562349] sd 2:0:0:0: [sda] Mode Sense: 23 00 00 00
<3>[    2.564663] sd 2:0:0:0: [sda] No Caching mode page found
<3>[    2.569992] sd 2:0:0:0: [sda] Assuming drive cache: write through
<6>[    2.584074]  sda: sda1
<5>[    2.592663] sd 2:0:0:0: [sda] Attached SCSI removable disk
<4>[    4.082535] hd51: module_layout: kernel tainted.
<4>[    4.087211] Disabling lock debugging due to kernel taint
<6>[    4.388564] alloc_contig_range: [14800, 1ad00) PFNs busy
<6>[    6.397425] Console: switching to colour frame buffer device 160x45
<6>[    6.684546] input: dreambox remote control (native) as /devices/virtual/input/input0
<6>[    6.692565] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
<6>[    6.706412] dvbdev: DVB: registering new adapter (dvb0)
<6>[    6.713041] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
<6>[    6.948875] input: front panel as /devices/virtual/input/input2
<6>[    6.955948] Registered IR keymap rc-cec
<6>[    6.959978] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input3
<6>[    6.967121] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
<30>[    7.288140] udevd[1566]: starting version 3.2.14
<30>[    7.313322] udevd[1567]: starting eudev-3.2.14
<6>[    8.139808] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
<6>[    8.180936] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
<4>[    8.470259] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<6>[   10.879038] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
<6>[   12.602403] NET: Registered protocol family 10
<6>[   12.607964] Segment Routing with IPv6
<6>[   12.633313] EXT4-fs (mmcblk0p8): re-mounted. Opts: (null)
<6>[   13.109346] Console: switching to colour dummy device 80x30
<6>[   15.209889] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<5>[   15.714360] random: crng init done
<6>[  281.627555] IPv6: ADDRCONF(NETDEV_UP): eth0: is not ready
<6>[  284.273321] bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
<6>[  284.281983] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: becomes ready

[ВИД-57]

Второй

Spoiler

OpenPLi Enigma2 crash log

crashdate=РЎР± РЅРѕСЏ 16 22:53:18 2024
compiledate=Nov 16 2024
skin=PLi-FullHD/skin.xml
sourcedate=2024-11-16
branch=develop
rev=a0968bd
component=Enigma2

model=hd51
imageversion=GCC-14.2
imagebuild=20241116

kernelcmdline=root=/dev/mmcblk0p8 rootsubdir=linuxrootfs3 kernel=/dev/mmcblk0p5 rw rootwait hd51_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200

nimsockets:
NIM Socket 0:
   Type: DVB-S2
   Name: AVL6211
   Has_Outputs: yes
   Frontend_Device: 0
   I2C_Device: 4



ine 3, in my_import
22:23:23.6980 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:23:23.6981
During handling of the above exception, another exception occurred:

22:23:23.6981 Traceback (most recent call last):
22:23:23.6982   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:23:23.6983   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:23:23.6983 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:23:26.3056 Traceback (most recent call last):
22:23:26.3059   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:23:26.3059   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:23:26.3060 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:23:26.3061
During handling of the above exception, another exception occurred:

22:23:26.3061 Traceback (most recent call last):
22:23:26.3063   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:23:26.3063   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:23:26.3064 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:23:30.6235 Traceback (most recent call last):
22:23:30.6238   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:23:30.6239   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:23:30.6240 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:23:30.6240
During handling of the above exception, another exception occurred:

22:23:30.6241 Traceback (most recent call last):
22:23:30.6242   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:23:30.6243   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:23:30.6244 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:23:45.4931 [eServicePeer] REMOVE Peer hd51
22:23:45.5374 [eServicePeer] REMOVE Peer hd51
22:24:00.4708 Traceback (most recent call last):
22:24:00.4715   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:24:00.4715   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:24:00.4717 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:24:00.4718
During handling of the above exception, another exception occurred:

22:24:00.4718 Traceback (most recent call last):
22:24:00.4720   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:24:00.4720   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:24:00.4721 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:24:03.6754 Traceback (most recent call last):
22:24:03.6757   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:24:03.6758   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:24:03.6759 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:24:03.6759
During handling of the above exception, another exception occurred:

22:24:03.6760 Traceback (most recent call last):
22:24:03.6761   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:24:03.6762   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:24:03.6762 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:24:55.0756 Traceback (most recent call last):
22:24:55.0759   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:24:55.0760   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:24:55.0761 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:24:55.0762
During handling of the above exception, another exception occurred:

22:24:55.0762 Traceback (most recent call last):
22:24:55.0763   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:24:55.0764   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:24:55.0765 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:25:26.1192 Traceback (most recent call last):
22:25:26.1195   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:25:26.1196   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:25:26.1197 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:25:26.1198
During handling of the above exception, another exception occurred:

22:25:26.1198 Traceback (most recent call last):
22:25:26.1200   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:25:26.1200   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:25:26.1201 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:26:00.9071 Traceback (most recent call last):
22:26:00.9074   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:26:00.9074   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:26:00.9075 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:26:00.9076
During handling of the above exception, another exception occurred:

22:26:00.9077 Traceback (most recent call last):
22:26:00.9078   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:26:00.9079   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:26:00.9079 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:26:10.1975 Traceback (most recent call last):
22:26:10.1978   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:26:10.1979   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:26:10.1980 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:26:10.1981
During handling of the above exception, another exception occurred:

22:26:10.1981 Traceback (most recent call last):
22:26:10.1982   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:26:10.1983   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:26:10.1984 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:26:43.6309 Traceback (most recent call last):
22:26:43.6315   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:26:43.6316   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:26:43.6317 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:26:43.6318
During handling of the above exception, another exception occurred:

22:26:43.6319 Traceback (most recent call last):
22:26:43.6320   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:26:43.6321   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:26:43.6321 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:27:40.6660 Traceback (most recent call last):
22:27:40.6663   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:27:40.6663   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:27:40.6664 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:27:40.6665
During handling of the above exception, another exception occurred:

22:27:40.6666 Traceback (most recent call last):
22:27:40.6667   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:27:40.6668   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:27:40.6668 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:27:52.9069 Traceback (most recent call last):
22:27:52.9072   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:27:52.9073   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:27:52.9074 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:27:52.9074
During handling of the above exception, another exception occurred:

22:27:52.9075 Traceback (most recent call last):
22:27:52.9077   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:27:52.9077   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:27:52.9078 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:28:33.3385 Traceback (most recent call last):
22:28:33.3388   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:28:33.3388   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:28:33.3389 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:28:33.3390
During handling of the above exception, another exception occurred:

22:28:33.3391 Traceback (most recent call last):
22:28:33.3392   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:28:33.3392   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:28:33.3393 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:51:29.3212 Traceback (most recent call last):
22:51:29.3216   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:51:29.3216   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:51:29.3217 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:51:29.3218
During handling of the above exception, another exception occurred:

22:51:29.3219 Traceback (most recent call last):
22:51:29.3220   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:51:29.3220   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:51:29.3221 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:52:39.6432 Traceback (most recent call last):
22:52:39.6435   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:52:39.6436   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:52:39.6437 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:52:39.6438
During handling of the above exception, another exception occurred:

22:52:39.6438 Traceback (most recent call last):
22:52:39.6440   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:52:39.6440   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:52:39.6441 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:52:55.9629 Traceback (most recent call last):
22:52:55.9632   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:52:55.9633   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:52:55.9633 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:52:55.9634
During handling of the above exception, another exception occurred:

22:52:55.9635 Traceback (most recent call last):
22:52:55.9636   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:52:55.9637   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:52:55.9638 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:52:57.3654 Traceback (most recent call last):
22:52:57.3657   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:52:57.3658   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:52:57.3658 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:52:57.3659
During handling of the above exception, another exception occurred:

22:52:57.3660 Traceback (most recent call last):
22:52:57.3661   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:52:57.3662   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:52:57.3662 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:53:00.6784 Traceback (most recent call last):
22:53:00.6787   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:53:00.6787   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:53:00.6788 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:53:00.6789
During handling of the above exception, another exception occurred:

22:53:00.6789 Traceback (most recent call last):
22:53:00.6791   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:53:00.6791   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:53:00.6792 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:53:03.0378 Traceback (most recent call last):
22:53:03.0419   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 309, in action
22:53:03.0420   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 279, in action
22:53:03.0420   File "/usr/lib/enigma2/python/Screens/Menu.py", line 134, in okbuttonClick
22:53:03.0421   File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 11, in __call__
22:53:03.0421   File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/plugin.py", line 284, in videoSetupMain
22:53:03.0422   File "/usr/lib/enigma2/python/StartEnigma.py", line 167, in open
    dialog = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
                                   ~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:03.0422   File "/usr/lib/enigma2/python/StartEnigma.py", line 106, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
           ~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:03.0423   File "/usr/lib/enigma2/python/StartEnigma.py", line 128, in doInstantiateDialog
    dialog = screen(self, *arguments, **kwargs)  # Create dialog.
22:53:03.0423   File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/plugin.py", line 46, in __init__
22:53:03.0424   File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/plugin.py", line 143, in createSetup
22:53:03.0424   File "/usr/lib/enigma2/python/Components/config.py", line 2228, in __getattr__
22:53:03.0425 AttributeError: autovolumelevel
22:53:03.0427 [ePyObject] (CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap object at 0xae7b9c30>>,('OkCancelActions', 'ok')) failed)
22:53:13.0592 Traceback (most recent call last):
22:53:13.0628   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 4308, in checkBsodCallback
22:53:13.0628   File "/usr/lib/enigma2/python/StartEnigma.py", line 156, in openWithCallback
    dialog = self.open(screen, *arguments, **kwargs)
22:53:13.0629   File "/usr/lib/enigma2/python/StartEnigma.py", line 167, in open
    dialog = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
                                   ~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:13.0629   File "/usr/lib/enigma2/python/StartEnigma.py", line 106, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
           ~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:13.0630   File "/usr/lib/enigma2/python/StartEnigma.py", line 128, in doInstantiateDialog
    dialog = screen(self, *arguments, **kwargs)  # Create dialog.
22:53:13.0631 TypeError: MessageBox.__init__() got an unexpected keyword argument 'typeIcon'
22:53:13.0632 [ePyObject] (CallObject(<bound method InfoBarHandleBsod.checkBsodCallback of <class 'Screens.InfoBar.InfoBar'>>,()) failed)
22:53:18.0610 Traceback (most recent call last):
22:53:18.0646   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 4308, in checkBsodCallback
22:53:18.0647   File "/usr/lib/enigma2/python/StartEnigma.py", line 156, in openWithCallback
    dialog = self.open(screen, *arguments, **kwargs)
22:53:18.0648   File "/usr/lib/enigma2/python/StartEnigma.py", line 167, in open
    dialog = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
                                   ~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:18.0648   File "/usr/lib/enigma2/python/StartEnigma.py", line 106, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
           ~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:18.0649   File "/usr/lib/enigma2/python/StartEnigma.py", line 128, in doInstantiateDialog
    dialog = screen(self, *arguments, **kwargs)  # Create dialog.
22:53:18.0650 TypeError: MessageBox.__init__() got an unexpected keyword argument 'typeIcon'
22:53:18.0651 [ePyObject] (CallObject(<bound method InfoBarHandleBsod.checkBsodCallback of <class 'Screens.InfoBar.InfoBar'>>,()) failed)


dmesg

[ВИД-57]

Третий

Spoiler

OpenPLi Enigma2 crash log

crashdate=РЎР± РЅРѕСЏ 16 22:53:28 2024
compiledate=Nov 16 2024
skin=PLi-FullHD/skin.xml
sourcedate=2024-11-16
branch=develop
rev=a0968bd
component=Enigma2

model=hd51
imageversion=GCC-14.2
imagebuild=20241116

kernelcmdline=root=/dev/mmcblk0p8 rootsubdir=linuxrootfs3 kernel=/dev/mmcblk0p5 rw rootwait hd51_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200

nimsockets:
NIM Socket 0:
   Type: DVB-S2
   Name: AVL6211
   Has_Outputs: yes
   Frontend_Device: 0
   I2C_Device: 4



ost recent call last):
22:23:30.6238   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:23:30.6239   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:23:30.6240 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:23:30.6240
During handling of the above exception, another exception occurred:

22:23:30.6241 Traceback (most recent call last):
22:23:30.6242   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:23:30.6243   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:23:30.6244 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:23:45.4931 [eServicePeer] REMOVE Peer hd51
22:23:45.5374 [eServicePeer] REMOVE Peer hd51
22:24:00.4708 Traceback (most recent call last):
22:24:00.4715   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:24:00.4715   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:24:00.4717 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:24:00.4718
During handling of the above exception, another exception occurred:

22:24:00.4718 Traceback (most recent call last):
22:24:00.4720   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:24:00.4720   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:24:00.4721 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:24:03.6754 Traceback (most recent call last):
22:24:03.6757   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:24:03.6758   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:24:03.6759 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:24:03.6759
During handling of the above exception, another exception occurred:

22:24:03.6760 Traceback (most recent call last):
22:24:03.6761   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:24:03.6762   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:24:03.6762 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:24:55.0756 Traceback (most recent call last):
22:24:55.0759   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:24:55.0760   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:24:55.0761 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:24:55.0762
During handling of the above exception, another exception occurred:

22:24:55.0762 Traceback (most recent call last):
22:24:55.0763   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:24:55.0764   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:24:55.0765 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:25:26.1192 Traceback (most recent call last):
22:25:26.1195   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:25:26.1196   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:25:26.1197 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:25:26.1198
During handling of the above exception, another exception occurred:

22:25:26.1198 Traceback (most recent call last):
22:25:26.1200   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:25:26.1200   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:25:26.1201 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:26:00.9071 Traceback (most recent call last):
22:26:00.9074   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:26:00.9074   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:26:00.9075 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:26:00.9076
During handling of the above exception, another exception occurred:

22:26:00.9077 Traceback (most recent call last):
22:26:00.9078   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:26:00.9079   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:26:00.9079 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:26:10.1975 Traceback (most recent call last):
22:26:10.1978   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:26:10.1979   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:26:10.1980 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:26:10.1981
During handling of the above exception, another exception occurred:

22:26:10.1981 Traceback (most recent call last):
22:26:10.1982   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:26:10.1983   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:26:10.1984 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:26:43.6309 Traceback (most recent call last):
22:26:43.6315   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:26:43.6316   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:26:43.6317 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:26:43.6318
During handling of the above exception, another exception occurred:

22:26:43.6319 Traceback (most recent call last):
22:26:43.6320   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:26:43.6321   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:26:43.6321 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:27:40.6660 Traceback (most recent call last):
22:27:40.6663   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:27:40.6663   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:27:40.6664 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:27:40.6665
During handling of the above exception, another exception occurred:

22:27:40.6666 Traceback (most recent call last):
22:27:40.6667   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:27:40.6668   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:27:40.6668 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:27:52.9069 Traceback (most recent call last):
22:27:52.9072   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:27:52.9073   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:27:52.9074 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:27:52.9074
During handling of the above exception, another exception occurred:

22:27:52.9075 Traceback (most recent call last):
22:27:52.9077   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:27:52.9077   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:27:52.9078 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:28:33.3385 Traceback (most recent call last):
22:28:33.3388   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:28:33.3388   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:28:33.3389 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:28:33.3390
During handling of the above exception, another exception occurred:

22:28:33.3391 Traceback (most recent call last):
22:28:33.3392   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:28:33.3392   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:28:33.3393 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:51:29.3212 Traceback (most recent call last):
22:51:29.3216   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:51:29.3216   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:51:29.3217 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:51:29.3218
During handling of the above exception, another exception occurred:

22:51:29.3219 Traceback (most recent call last):
22:51:29.3220   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:51:29.3220   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:51:29.3221 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:52:39.6432 Traceback (most recent call last):
22:52:39.6435   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:52:39.6436   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:52:39.6437 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:52:39.6438
During handling of the above exception, another exception occurred:

22:52:39.6438 Traceback (most recent call last):
22:52:39.6440   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:52:39.6440   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:52:39.6441 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:52:55.9629 Traceback (most recent call last):
22:52:55.9632   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:52:55.9633   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:52:55.9633 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:52:55.9634
During handling of the above exception, another exception occurred:

22:52:55.9635 Traceback (most recent call last):
22:52:55.9636   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:52:55.9637   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:52:55.9638 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:52:57.3654 Traceback (most recent call last):
22:52:57.3657   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:52:57.3658   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:52:57.3658 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:52:57.3659
During handling of the above exception, another exception occurred:

22:52:57.3660 Traceback (most recent call last):
22:52:57.3661   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:52:57.3662   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:52:57.3662 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:53:00.6784 Traceback (most recent call last):
22:53:00.6787   File "/usr/lib/enigma2/python/skin.py", line 2338, in processWidget
22:53:00.6787   File "/usr/lib/enigma2/python/Tools/Import.py", line 3, in my_import
22:53:00.6788 ModuleNotFoundError: No module named 'Components.Renderer.RollerCharLCD'
22:53:00.6789
During handling of the above exception, another exception occurred:

22:53:00.6789 Traceback (most recent call last):
22:53:00.6791   File "/usr/lib/enigma2/python/skin.py", line 2425, in processScreen
22:53:00.6791   File "/usr/lib/enigma2/python/skin.py", line 2340, in processWidget
22:53:00.6792 skin.SkinError: [Skin] Error: Renderer 'RollerCharLCD' not found!
22:53:03.0378 Traceback (most recent call last):
22:53:03.0419   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 309, in action
22:53:03.0420   File "/usr/lib/enigma2/python/Components/ActionMap.py", line 279, in action
22:53:03.0420   File "/usr/lib/enigma2/python/Screens/Menu.py", line 134, in okbuttonClick
22:53:03.0421   File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 11, in __call__
22:53:03.0421   File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/plugin.py", line 284, in videoSetupMain
22:53:03.0422   File "/usr/lib/enigma2/python/StartEnigma.py", line 167, in open
    dialog = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
                                   ~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:03.0422   File "/usr/lib/enigma2/python/StartEnigma.py", line 106, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
           ~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:03.0423   File "/usr/lib/enigma2/python/StartEnigma.py", line 128, in doInstantiateDialog
    dialog = screen(self, *arguments, **kwargs)  # Create dialog.
22:53:03.0423   File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/plugin.py", line 46, in __init__
22:53:03.0424   File "/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/plugin.py", line 143, in createSetup
22:53:03.0424   File "/usr/lib/enigma2/python/Components/config.py", line 2228, in __getattr__
22:53:03.0425 AttributeError: autovolumelevel
22:53:03.0427 [ePyObject] (CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap object at 0xae7b9c30>>,('OkCancelActions', 'ok')) failed)
22:53:13.0592 Traceback (most recent call last):
22:53:13.0628   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 4308, in checkBsodCallback
22:53:13.0628   File "/usr/lib/enigma2/python/StartEnigma.py", line 156, in openWithCallback
    dialog = self.open(screen, *arguments, **kwargs)
22:53:13.0629   File "/usr/lib/enigma2/python/StartEnigma.py", line 167, in open
    dialog = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
                                   ~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:13.0629   File "/usr/lib/enigma2/python/StartEnigma.py", line 106, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
           ~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:13.0630   File "/usr/lib/enigma2/python/StartEnigma.py", line 128, in doInstantiateDialog
    dialog = screen(self, *arguments, **kwargs)  # Create dialog.
22:53:13.0631 TypeError: MessageBox.__init__() got an unexpected keyword argument 'typeIcon'
22:53:13.0632 [ePyObject] (CallObject(<bound method InfoBarHandleBsod.checkBsodCallback of <class 'Screens.InfoBar.InfoBar'>>,()) failed)
22:53:18.0610 Traceback (most recent call last):
22:53:18.0646   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 4308, in checkBsodCallback
22:53:18.0647   File "/usr/lib/enigma2/python/StartEnigma.py", line 156, in openWithCallback
    dialog = self.open(screen, *arguments, **kwargs)
22:53:18.0648   File "/usr/lib/enigma2/python/StartEnigma.py", line 167, in open
    dialog = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
                                   ~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:18.0648   File "/usr/lib/enigma2/python/StartEnigma.py", line 106, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
           ~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:18.0649   File "/usr/lib/enigma2/python/StartEnigma.py", line 128, in doInstantiateDialog
    dialog = screen(self, *arguments, **kwargs)  # Create dialog.
22:53:18.0650 TypeError: MessageBox.__init__() got an unexpected keyword argument 'typeIcon'
22:53:18.0651 [ePyObject] (CallObject(<bound method InfoBarHandleBsod.checkBsodCallback of <class 'Screens.InfoBar.InfoBar'>>,()) failed)
22:53:28.0811 Traceback (most recent call last):
22:53:28.0852   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 4308, in checkBsodCallback
22:53:28.0854   File "/usr/lib/enigma2/python/StartEnigma.py", line 156, in openWithCallback
    dialog = self.open(screen, *arguments, **kwargs)
22:53:28.0854   File "/usr/lib/enigma2/python/StartEnigma.py", line 167, in open
    dialog = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
                                   ~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:28.0855   File "/usr/lib/enigma2/python/StartEnigma.py", line 106, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
           ~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
22:53:28.0857   File "/usr/lib/enigma2/python/StartEnigma.py", line 128, in doInstantiateDialog
    dialog = screen(self, *arguments, **kwargs)  # Create dialog.
22:53:28.0895 TypeError: MessageBox.__init__() got an unexpected keyword argument 'typeIcon'
22:53:28.0898 [ePyObject] (CallObject(<bound method InfoBarHandleBsod.checkBsodCallback of <class 'Screens.InfoBar.InfoBar'>>,()) failed)


dmesg

[ВИД-57]

Е-tools с фида работает, спасибо за подсказку.

[foxbob]

Ошибку исправил.Замените у себяhttps://github.com/68foxboris/enigma2/commit/7ea9d44f9a26974aef183e5d6b132a61208525b0

[ВИД-57]

После замены проблема исчезла. Спасибо.