Обсуждение ресивера GI ET11000

Автор Ednaz, 29 Серпень 2017, 05:06:21

Попередня тема - Наступна тема

0 Користувачі і 3 Гостей дивляться цю тему.

Vasiliks

nikolasi, Коля, я смогу проверить только вечером.

nikolasi

да без проблем.но собрало без ошибок именно под этот линукс ет11000 тоисть под линукс linux-etxx00_4.1.37 и поидеи должно теперь работать все.тот же рецепт что предлагает производитель и использует пли и атв он только под ядра не выше 3.13 и 3.14 потому не пашет на всех арм так как в арм ядро то уже идет 4 и выше

Vasiliks

nikolasi, на open ATV 6.2 запустился!
Spoiler
Trying 192.168.3.99...
Connected to 192.168.3.99.
Escape character is '^]'.

Welcome to openATV for gi11000
openatv 6.2 gi11000


gi11000 login: root
root@gi11000:~#  dmesg
Booting Linux on physical CPU 0x0
Linux version 4.1.37 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Wed Jan 9 00:09:01 CET 2019
CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: ET1x000_EMMC_DDR3_NOAVS
moving dtb from 0x0000000007628000 to 0x000000000098aa44
bmem: Reserved 700 MiB at 0x0000000014400000
cma: Reserved 16 MiB at 0x0000000012c00000
Forcing write-allocate cache policy for SMP
Memory policy: Data cache writealloc
On node 0 totalpages: 262144
  DMA zone: 632 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 80896 pages, LIFO batch:15
  HighMem zone: 181248 pages, LIFO batch:31
PERCPU: Embedded 12 pages/cpu @d23ae000 s16396 r8192 d24564 u49152
pcpu-alloc: s16396 r8192 d24564 u49152 alloc=12*4096
pcpu-alloc:
  • 0
  • 1
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261512
    Kernel command line: root=/dev/mmcblk0p4 rootwait rw vmalloc=692m bmem=700m@324m
    PID hash table entries: 2048 (order: 1, 8192 bytes)
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 296672K/1048576K available (6818K kernel code, 265K rwdata, 2152K rodata, 300K init, 190K bss, 735520K reserved, 16384K cma-reserved, 8188K highmem)
    Virtual kernel memory layout:
        vector  : 0xffff0000 - 0xffff1000   (   4 kB)
        fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
        vmalloc : 0xd4000000 - 0xff000000   ( 688 MB)
        lowmem  : 0xc0000000 - 0xd3c00000   ( 316 MB)
        pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
        modules : 0xbf000000 - 0xbfe00000   (  14 MB)
          .text : 0xc0008000 - 0xc08cacfc   (8972 kB)
          .init : 0xc08cb000 - 0xc0916000   ( 300 kB)
          .data : 0xc0916000 - 0xc0958790   ( 266 kB)
           .bss : 0xc095b000 - 0xc098aa44   ( 191 kB)
    Hierarchical RCU implementation.
            RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    irq_brcmstb_l2: registered L2 intc (mem: 0xd4002000, parent irq: 93)
    irq_brcmstb_l2: registered L2 intc (mem: 0xd4008000, parent irq: 64)
    irq_brcmstb_l2: registered L2 intc (mem: 0xd400a640, parent irq: 95)
    irq_brcmstb_l2: registered L2 intc (mem: 0xd400c200, parent irq: 58)
    irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
    irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd400e380, parent IRQ(s): 3)
    MCP: Enabling write pairing
    Architected cp15 timer(s) running at 27.00MHz (virt).
    clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
    sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
    Switching to timer-based delay loop, resolution 37ns
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: update cpu_capacity 1024
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x8440 - 0x8498
    CPU1: update cpu_capacity 1024
    CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    Brought up 2 CPUs
    SMP: Total of 2 processors activated (108.00 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
    clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor ladder
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 8 bytes.
    Broadcom Brahma-B15 readahead cache at: 0xd410e478
    vgaarb: loaded
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    Advanced Linux Sound Architecture Driver Initialized.
    Bluetooth: Core ver 2.20
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    Switched to clocksource arch_sys_counter
    FS-Cache: Loaded
    thermal thermal_zone0: failed to read out thermal zone (-22)
    NET: Registered protocol family 2
    TCP established hash table entries: 4096 (order: 2, 16384 bytes)
    TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    TCP: Hash tables configured (established 4096 bind 4096)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
    hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    FS-Cache: Netfs 'nfs' registered for caching
    NFS: Registering the id_resolver key type
    Key type id_resolver registered
    Key type id_legacy registered
    nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    FS-Cache: Netfs 'cifs' registered for caching
    Key type cifs.spnego registered
    fuse init (API version 7.23)
    bounce: pool size: 64 pages
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    brcm-gisb-arb f0400000.gisb-arb: registered mem: d4134000, irqs: 261, 262
    brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
    brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
    brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
    brcm-pci f0460000.pcie: cannot get msi intr; MSI disabled
    brcm-pci f0460000.pcie: link down
    brcm-waketimer f0417580.waketimer: rtc core: registered brcmstb-waketmr as rtc0
    brcm-waketimer f0417580.waketimer: registered, with irq 263
    Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
    console [ttyS0] disabled
    f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
    console [ttyS0] enabled
    of_serial: probe of f040a940.serial failed with error -28
    of_serial: probe of f040a980.serial failed with error -28
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
    brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
    brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
    scsi host0: brcm-ahci
    scsi host1: brcm-ahci
    ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
    ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
    brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
    brcmstb_qspi f03e3400.spi: using bspi-mspi mode
    m25p80 spi32766.0: found mx25l6405d, expected m25p80
    m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
    6 ofpart partitions found on MTD device spi32766.0
    Creating 6 MTD partitions on "spi32766.0":
    0x000000000000-0x000000200000 : "flash0.bolt"
    0x000000200000-0x000000240000 : "flash0.macadr"
    0x000000240000-0x000000280000 : "flash0.nvram"
    0x000000280000-0x000000300000 : "flash0.devtree"
    0x000000300000-0x000000800000 : "flash0.avail0"
    0x000000000000-0x000000800000 : "flash0"
    libphy: Fixed MDIO Bus: probed
    bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
    bcmgenet f0b00000.ethernet: failed to get enet-mux clock
    libphy: bcmgenet MII bus: probed
    usbcore: registered new interface driver r8152
    hso: /home/oe1/atv62/build-enviroment/builds/openatv/release/et1x000/tmp/work-shared/et1x000/kernel-source/drivers/net/usb/hso.c: Option Wireless
    ata1: SATA link down (SStatus 0 SControl 300)
    usbcore: registered new interface driver hso
    usbcore: registered new interface driver cdc_ether
    usbcore: registered new interface driver ipheth
    xhci-brcm: xHCI BRCM driver
    xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
    xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
    xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
    xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
    usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ehci-brcm: EHCI BRCM driver
    ehci-brcm f0470300.ehci_v2: EHCI Host Controller
    ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
    ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
    ata2: SATA link down (SStatus 0 SControl 300)
    ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 1 port detected
    ehci-brcm f0470500.ehci_v2: EHCI Host Controller
    ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
    ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
    ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 1 port detected
    ohci-brcm: OHCI BRCM driver
    ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
    ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
    ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 1 port detected
    ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
    ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
    ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 1 port detected
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-pci: OHCI PCI platform driver
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    usbcore: registered new interface driver appletouch
    usbcore: registered new interface driver bcm5974
    usbcore: registered new interface driver synaptics_usb
    i2c /dev entries driver
    brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
    usbcore: registered new interface driver btusb
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
    sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
    mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
    sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
    sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
    usb 3-1: new high-speed USB device number 2 using ehci-brcm
    mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
    hidraw: raw HID events driver (C) Jiri Kosina
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    Initializing XFRM netlink socket
    NET: Registered protocol family 17
    NET: Registered protocol family 15
    Key type dns_resolver registered
    Registering SWP/SWPB emulation handler
    brcm-waketimer f0417580.waketimer: setting system clock to 1970-01-01 00:00:10 UTC (10)
    ALSA device list:
      No soundcards found.
    Waiting for root device /dev/mmcblk0p4...
    mmc1: MAN_BKOPS_EN bit is not set
    mmc1: new high speed MMC card at address 0001
    mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
    mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
    mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
    mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
    usb-storage 3-1:1.0: USB Mass Storage device detected
    mmcblk0: p1 p2 p3 p4
    scsi host2: usb-storage 3-1:1.0
    usb 2-2: new SuperSpeed USB device number 2 using xhci-brcm
    usb-storage 2-2:1.0: USB Mass Storage device detected
    scsi host3: usb-storage 2-2:1.0
    EXT4-fs (mmcblk0p4): warning: maximal mount count reached, running e2fsck is recommended
    EXT4-fs (mmcblk0p4): recovery complete
    EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 179:4.
    devtmpfs: mounted
    Freeing unused kernel memory: 300K (c08cb000 - c0916000)
    tpm: module_layout: kernel tainted.
    Disabling lock debugging due to kernel taint
    scsi 3:0:0:0: Direct-Access     HGST HTS 541010B7E610     0203 PQ: 0 ANSI: 6
    sd 3:0:0:0: Attached scsi generic sg0 type 0
    scsi 2:0:0:0: Direct-Access     SMI      Memory           1100 PQ: 0 ANSI: 4
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    sd 2:0:0:0: [sdb] 15826944 512-byte logical blocks: (8.10 GB/7.55 GiB)
    sd 2:0:0:0: [sdb] Write Protect is off
    sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
    sd 2:0:0:0: [sdb] No Caching mode page found
    sd 2:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1 sdb2
    sd 2:0:0:0: [sdb] Attached SCSI removable disk
    DVB: registering new adapter (et11000)
    platform et11000.0: DVB: registering adapter 0 frontend 0 (AVL6211)...
    input: dreambox remote control (native) as /devices/virtual/input/input0
    sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
    sd 3:0:0:0: [sda] Write Protect is off
    sd 3:0:0:0: [sda] Mode Sense: 47 00 00 08
    sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1
    sd 3:0:0:0: [sda] Attached SCSI disk
    FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
    EXT4-fs (sdb2): warning: maximal mount count reached, running e2fsck is recommended
    SGI XFS with security attributes, no debug enabled
    EXT4-fs (sdb2): recovery complete
    EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
    random: nonblocking pool is initialized
    EXT4-fs (mmcblk0p4): re-mounted. Opts: data=ordered
    UDF-fs: warning (device sda1): udf_fill_super: No partition found (2)
    NET: Registered protocol family 10
    UDF-fs: warning (device sda1): udf_fill_super: No partition found (2)
    sd 3:0:0:0: [sda] Sense Key : 0x1 [current]
    sd 3:0:0:0: [sda] ASC=0x37 ASCQ=0x0
    f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    bcmgenet f0b00000.ethernet: configuring instance for internal PHY
    IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    bcmgenet f0b00000.ethernet eth0: Link is Down
    bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
    IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    usb 3-1: USB disconnect, device number 2
    usb 3-1: new high-speed USB device number 3 using ehci-brcm
    usb 3-1: reset high-speed USB device number 3 using ehci-brcm
    mt7601u 3-1:1.0: ASIC revision: 76010001 MAC revision: 76010500
    mt7601u 3-1:1.0: Firmware Version: 0.1.00 Build: 7640 Build time: 201302052146____
    mt7601u 3-1:1.0: Warning: unsupported EEPROM version 0d
    mt7601u 3-1:1.0: EEPROM ver:0d fae:00
    mt7601u 3-1:1.0: EEPROM country region 01 (channels 1-13)
    ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    usbcore: registered new interface driver mt7601u
    root@gi11000:~#

Vasiliks

на пли нет
Spoiler
Trying 192.168.3.99...
Connected to 192.168.3.99.
Escape character is '^]'.

openpli homebuild et1x000

et1x000 login: root
root@et1x000:~# dmesg
Booting Linux on physical CPU 0x0
Linux version 4.1.37 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Sat Feb 16 15:19:45 CET 2019
CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: ET1x000_EMMC_DDR3_NOAVS
moving dtb from 0x0000000007628000 to 0x0000000000977a84
bmem: Reserved 700 MiB at 0x0000000014400000
cma: Reserved 16 MiB at 0x0000000012c00000
Forcing write-allocate cache policy for SMP
Memory policy: Data cache writealloc
On node 0 totalpages: 262144
  DMA zone: 632 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 80896 pages, LIFO batch:15
  HighMem zone: 181248 pages, LIFO batch:31
PERCPU: Embedded 12 pages/cpu @d23ae000 s16396 r8192 d24564 u49152
pcpu-alloc: s16396 r8192 d24564 u49152 alloc=12*4096
pcpu-alloc:
  • 0
  • 1
    Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261512
    Kernel command line: root=/dev/mmcblk0p4 rootwait rw vmalloc=692m bmem=700m@324m
    PID hash table entries: 2048 (order: 1, 8192 bytes)
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 296748K/1048576K available (6801K kernel code, 228K rwdata, 2132K rodata, 296K init, 190K bss, 735444K reserved, 16384K cma-reserved, 8188K highmem)
    Virtual kernel memory layout:
        vector  : 0xffff0000 - 0xffff1000   (   4 kB)
        fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
        vmalloc : 0xd4000000 - 0xff000000   ( 688 MB)
        lowmem  : 0xc0000000 - 0xd3c00000   ( 316 MB)
        pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
        modules : 0xbf000000 - 0xbfe00000   (  14 MB)
          .text : 0xc0008000 - 0xc08c1b6c   (8935 kB)
          .init : 0xc08c2000 - 0xc090c000   ( 296 kB)
          .data : 0xc090c000 - 0xc09450d0   ( 229 kB)
           .bss : 0xc0948000 - 0xc0977a84   ( 191 kB)
    Hierarchical RCU implementation.
            RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    NR_IRQS:16 nr_irqs:16 16
    irq_brcmstb_l2: registered L2 intc (mem: 0xd4002000, parent irq: 93)
    irq_brcmstb_l2: registered L2 intc (mem: 0xd4008000, parent irq: 64)
    irq_brcmstb_l2: registered L2 intc (mem: 0xd400a640, parent irq: 95)
    irq_brcmstb_l2: registered L2 intc (mem: 0xd400c200, parent irq: 58)
    irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
    irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd400e380, parent IRQ(s): 3)
    MCP: Enabling write pairing
    Architected cp15 timer(s) running at 27.00MHz (virt).
    clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
    sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
    Switching to timer-based delay loop, resolution 37ns
    Console: colour dummy device 80x30
    Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
    pid_max: default: 32768 minimum: 301
    Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    CPU: Testing write buffer coherency: ok
    CPU0: update cpu_capacity 1024
    CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    Setting up static identity map for 0x8440 - 0x8498
    CPU1: update cpu_capacity 1024
    CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    Brought up 2 CPUs
    SMP: Total of 2 processors activated (108.00 BogoMIPS).
    CPU: All CPU(s) started in SVC mode.
    devtmpfs: initialized
    VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
    clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
    NET: Registered protocol family 16
    DMA: preallocated 256 KiB pool for atomic coherent allocations
    cpuidle: using governor ladder
    cpuidle: using governor menu
    hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
    hw-breakpoint: maximum watchpoint size is 8 bytes.
    Broadcom Brahma-B15 readahead cache at: 0xd410e478
    vgaarb: loaded
    SCSI subsystem initialized
    libata version 3.00 loaded.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    media: Linux media interface: v0.10
    Linux video capture interface: v2.00
    Advanced Linux Sound Architecture Driver Initialized.
    Bluetooth: Core ver 2.20
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: SCO socket layer initialized
    Switched to clocksource arch_sys_counter
    FS-Cache: Loaded
    thermal thermal_zone0: failed to read out thermal zone (-22)
    NET: Registered protocol family 2
    TCP established hash table entries: 4096 (order: 2, 16384 bytes)
    TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
    TCP: Hash tables configured (established 4096 bind 4096)
    UDP hash table entries: 256 (order: 1, 8192 bytes)
    UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    NET: Registered protocol family 1
    RPC: Registered named UNIX socket transport module.
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    RPC: Registered tcp NFSv4.1 backchannel transport module.
    PCI: CLS 0 bytes, default 64
    CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
    hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
    futex hash table entries: 512 (order: 3, 32768 bytes)
    NFS: Registering the id_resolver key type
    Key type id_resolver registered
    Key type id_legacy registered
    nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    fuse init (API version 7.23)
    bounce: pool size: 64 pages
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    brcm-gisb-arb f0400000.gisb-arb: registered mem: d4134000, irqs: 261, 262
    brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
    brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
    brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
    brcm-pci f0460000.pcie: cannot get msi intr; MSI disabled
    brcm-pci f0460000.pcie: link down
    brcm-waketimer f0417580.waketimer: rtc core: registered brcmstb-waketmr as rtc0
    brcm-waketimer f0417580.waketimer: registered, with irq 263
    Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
    console [ttyS0] disabled
    f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
    console [ttyS0] enabled
    of_serial: probe of f040a940.serial failed with error -28
    of_serial: probe of f040a980.serial failed with error -28
    [drm] Initialized drm 1.1.0 20060810
    brd: module loaded
    loop: module loaded
    brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
    brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
    brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
    scsi host0: brcm-ahci
    scsi host1: brcm-ahci
    ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
    ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
    brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
    brcmstb_qspi f03e3400.spi: using bspi-mspi mode
    m25p80 spi32766.0: found mx25l6405d, expected m25p80
    m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
    6 ofpart partitions found on MTD device spi32766.0
    Creating 6 MTD partitions on "spi32766.0":
    0x000000000000-0x000000200000 : "flash0.bolt"
    0x000000200000-0x000000240000 : "flash0.macadr"
    0x000000240000-0x000000280000 : "flash0.nvram"
    0x000000280000-0x000000300000 : "flash0.devtree"
    0x000000300000-0x000000800000 : "flash0.avail0"
    0x000000000000-0x000000800000 : "flash0"
    libphy: Fixed MDIO Bus: probed
    bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
    bcmgenet f0b00000.ethernet: failed to get enet-mux clock
    libphy: bcmgenet MII bus: probed
    usbcore: registered new interface driver r8152
    hso: /home/vasiliks/openpli-oe-core/build/tmp/work-shared/et1x000/kernel-source/drivers/net/usb/hso.c: Option Wireless
    usbcore: registered new interface driver hso
    usbcore: registered new interface driver cdc_ether
    usbcore: registered new interface driver ipheth
    ata1: SATA link down (SStatus 0 SControl 300)
    xhci-brcm: xHCI BRCM driver
    xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
    xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
    xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
    xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
    usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ehci-brcm: EHCI BRCM driver
    ehci-brcm f0470300.ehci_v2: EHCI Host Controller
    ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
    ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
    ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 1 port detected
    ehci-brcm f0470500.ehci_v2: EHCI Host Controller
    ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
    ata2: SATA link down (SStatus 0 SControl 300)
    ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
    ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 1 port detected
    ohci-brcm: OHCI BRCM driver
    ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
    ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
    ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 1 port detected
    ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
    ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
    ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 1 port detected
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ehci-pci: EHCI PCI platform driver
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ohci-pci: OHCI PCI platform driver
    usbcore: registered new interface driver cdc_acm
    cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
    usbcore: registered new interface driver cdc_wdm
    usbcore: registered new interface driver usb-storage
    mousedev: PS/2 mouse device common for all mice
    usbcore: registered new interface driver appletouch
    usbcore: registered new interface driver bcm5974
    usbcore: registered new interface driver synaptics_usb
    i2c /dev entries driver
    brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
    usbcore: registered new interface driver btusb
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pltfm: SDHCI platform and OF driver helper
    sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
    sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
    usb 3-1: new high-speed USB device number 2 using ehci-brcm
    mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
    sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
    sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
    mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
    hidraw: raw HID events driver (C) Jiri Kosina
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    Initializing XFRM netlink socket
    NET: Registered protocol family 17
    NET: Registered protocol family 15
    Key type dns_resolver registered
    Registering SWP/SWPB emulation handler
    brcm-waketimer f0417580.waketimer: setting system clock to 1970-01-01 00:00:06 UTC (6)
    ALSA device list:
      No soundcards found.
    Waiting for root device /dev/mmcblk0p4...
    mmc1: MAN_BKOPS_EN bit is not set
    mmc1: new high speed MMC card at address 0001
    mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
    mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
    mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
    mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
    mmcblk0: p1 p2 p3 p4
    usb 2-2: new SuperSpeed USB device number 2 using xhci-brcm
    usb-storage 2-2:1.0: USB Mass Storage device detected
    scsi host2: usb-storage 2-2:1.0
    EXT4-fs (mmcblk0p4): warning: maximal mount count reached, running e2fsck is recommended
    EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
    VFS: Mounted root (ext4 filesystem) on device 179:4.
    devtmpfs: mounted
    Freeing unused kernel memory: 296K (c08c2000 - c090c000)
    blk_update_request: I/O error, dev mtdblock5, sector 16256
    blk_update_request: I/O error, dev mtdblock5, sector 16256
    Buffer I/O error on dev mtdblock5, logical block 2032, async page read
    blk_update_request: I/O error, dev mtdblock5, sector 0
    blk_update_request: I/O error, dev mtdblock5, sector 8
    blk_update_request: I/O error, dev mtdblock5, sector 0
    Buffer I/O error on dev mtdblock5, logical block 0, async page read
    blk_update_request: I/O error, dev mtdblock4, sector 10112
    blk_update_request: I/O error, dev mtdblock4, sector 10112
    Buffer I/O error on dev mtdblock4, logical block 1264, async page read
    blk_update_request: I/O error, dev mtdblock4, sector 0
    blk_update_request: I/O error, dev mtdblock4, sector 8
    blk_update_request: I/O error, dev mtdblock4, sector 0
    Buffer I/O error on dev mtdblock4, logical block 0, async page read
    Buffer I/O error on dev mtdblock3, logical block 112, async page read
    Buffer I/O error on dev mtdblock3, logical block 0, async page read
    Buffer I/O error on dev mtdblock2, logical block 48, async page read
    Buffer I/O error on dev mtdblock2, logical block 0, async page read
    Buffer I/O error on dev mtdblock1, logical block 48, async page read
    Buffer I/O error on dev mtdblock1, logical block 0, async page read
    scsi 2:0:0:0: Direct-Access     HGST HTS 541010B7E610     0203 PQ: 0 ANSI: 6
    sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
    sd 2:0:0:0: Attached scsi generic sg0 type 0
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 47 00 00 08
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1
    sd 2:0:0:0: [sda] Attached SCSI disk
    DVB: registering new adapter (et11000)
    platform et11000.0: DVB: registering adapter 0 frontend 0 (AVL6211)...
    input: dreambox remote control (native) as /devices/virtual/input/input0
    random: nonblocking pool is initialized
    EXT4-fs (mmcblk0p4): re-mounted. Opts: data=ordered
    mt7601u: disagrees about version of symbol skb_put
    mt7601u: Unknown symbol skb_put (err -22)
    mt7601u: disagrees about version of symbol ieee80211_tx_status_noskb
    mt7601u: Unknown symbol ieee80211_tx_status_noskb (err -22)
    mt7601u: disagrees about version of symbol consume_skb
    mt7601u: Unknown symbol consume_skb (err -22)
    mt7601u: disagrees about version of symbol dev_warn
    mt7601u: Unknown symbol dev_warn (err -22)
    mt7601u: disagrees about version of symbol ieee80211_free_hw
    mt7601u: Unknown symbol ieee80211_free_hw (err -22)
    mt7601u: disagrees about version of symbol skb_add_rx_frag
    mt7601u: Unknown symbol skb_add_rx_frag (err -22)
    mt7601u: disagrees about version of symbol ieee80211_register_hw
    mt7601u: Unknown symbol ieee80211_register_hw (err -22)
    mt7601u: disagrees about version of symbol ieee80211_get_hdrlen_from_skb
    mt7601u: Unknown symbol ieee80211_get_hdrlen_from_skb (err -22)
    mt7601u: disagrees about version of symbol ieee80211_wake_queue
    mt7601u: Unknown symbol ieee80211_wake_queue (err -22)
    mt7601u: disagrees about version of symbol pskb_expand_head
    mt7601u: Unknown symbol pskb_expand_head (err -22)
    mt7601u: disagrees about version of symbol ieee80211_get_tx_rates
    mt7601u: Unknown symbol ieee80211_get_tx_rates (err -22)
    mt7601u: disagrees about version of symbol __alloc_skb
    mt7601u: Unknown symbol __alloc_skb (err -22)
    mt7601u: disagrees about version of symbol _dev_info
    mt7601u: Unknown symbol _dev_info (err -22)
    mt7601u: disagrees about version of symbol ieee80211_queue_delayed_work
    mt7601u: Unknown symbol ieee80211_queue_delayed_work (err -22)
    mt7601u: disagrees about version of symbol skb_pull
    mt7601u: Unknown symbol skb_pull (err -22)
    mt7601u: disagrees about version of symbol skb_push
    mt7601u: Unknown symbol skb_push (err -22)
    mt7601u: disagrees about version of symbol ieee80211_rx
    mt7601u: Unknown symbol ieee80211_rx (err -22)
    mt7601u: disagrees about version of symbol ieee80211_wake_queues
    mt7601u: Unknown symbol ieee80211_wake_queues (err -22)
    mt7601u: disagrees about version of symbol ieee80211_free_txskb
    mt7601u: Unknown symbol ieee80211_free_txskb (err -22)
    mt7601u: disagrees about version of symbol ieee80211_alloc_hw_nm
    mt7601u: Unknown symbol ieee80211_alloc_hw_nm (err -22)
    mt7601u: disagrees about version of symbol dev_err
    mt7601u: Unknown symbol dev_err (err -22)
    mt7601u: disagrees about version of symbol ieee80211_tx_status
    mt7601u: Unknown symbol ieee80211_tx_status (err -22)
    mt7601u: disagrees about version of symbol ieee80211_stop_queue
    mt7601u: Unknown symbol ieee80211_stop_queue (err -22)
    mt7601u: disagrees about version of symbol ieee80211_stop_queues
    mt7601u: Unknown symbol ieee80211_stop_queues (err -22)
    mt7601u: disagrees about version of symbol skb_trim
    mt7601u: Unknown symbol skb_trim (err -22)
    mt7601u: disagrees about version of symbol ieee80211_unregister_hw
    mt7601u: Unknown symbol ieee80211_unregister_hw (err -22)
    mt7601u: disagrees about version of symbol skb_pad
    mt7601u: Unknown symbol skb_pad (err -22)
    f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    bcmgenet f0b00000.ethernet: configuring instance for internal PHY
    bcmgenet f0b00000.ethernet eth0: Link is Down
    bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
    NET: Registered protocol family 10
    sd 2:0:0:0: [sda] Sense Key : 0x1 [current]
    sd 2:0:0:0: [sda] ASC=0x37 ASCQ=0x0
    root@et1x000:~#

nikolasi

Ну пли я уже больше года не смотрю. Что и как там сейчас не знаю. Но ядро и дрова то одинаковы. Что в атв что в пли....

nikolasi

кто хочет попробовать BlackHole-3.0.8 от ву+ качаем эту версию атв https://drive.google.com/open?id=1vm0wsvTdoC0QtNuxiYF2hyaHr0_UiXdA шьем во флешь ее(ни стандартная атв ни мои предыдущии сборки не дадут вам возможности установить BlackHole в меобут но дальнейшии мои сборки будут содержать все нужное для этого) форматируем флешку средствами имиджа монтируем ее устанавливаем на нее меобут далее качем эту сборку BlackHole-3.0.8 https://drive.google.com/open?id=1hUig6fFmoeo2T0zQU5H4DXAovE0m57MK и ставим ее в меобут и пользуемся
естественно BlackHole не обновлять получите не рабочую его версию.работет все что есть в имиджи кончая коди 17 тоже.работает выбор типа пульта в плагинах-по дефолту под ет11000 можете сменить там вписал 3 типа и подправил под наш тюнер.работает телетекст-тоже подправил под наш тюнер.работает полностью наш пульт а именно ввод и цыфрами  и буквами-тоже правил.правок очень много но это все таже BlackHole-3.0.8 собрана на гите опенвуплюсс.скины от пли не встанут эму тоже от пли не встанет-другой гит другая е2.советую выбрать скин BlackShadowSE обалденно красивый.правда.стоит уже эму викард лишь вписать свои настройки.работает т230-т230с-т230с2 и тд.мне лично имидж нравиться-лаконичен и красив.реально очень красив и прикольное качество изображения на нем.Особенно советую в атв во флеше выбрать нет поддержки драйвера коди.тогда реально увидите всю четкость и красоту BlackHole-3.0.8

CAAXOB

Ednaz , давненько не было , а очень хотелось бы поюзать свежую сборочку со всеми прибамбасами от Вас . Есть надежда ?   :)

Ednaz

CAAXOB, постараюсь выбрать время. Сейчас ооочень много работы.
GI ET11000 4K, Duo4k, Ultimo4k, Solo4k, Uno4k, Uno4k SE, Zero4k, Octagon SF4008, AX HD51, Dreambox 900, Solo2, SoloSE v2, Zero, VU+Duo, Xtrend ET-9000, ET-9200, ET7000mini, Force1, Spark2, GI Fly и др.
Поблагодарить Z707779886070, E342760518570, R341155895525,  MasterCard 5168 7422 4047 5503monobank 5375 4141 1455 0253

Ednaz

Скомпилировал сборку Open Vision 7.2 r48 на мой один из любимых ресиверов ЕТ11000. Жаль, пока с телнет протоколом проблемы. Написал Persian Prince, жду что мне ответит. Где промахнулись в рецептах.
GI ET11000 4K, Duo4k, Ultimo4k, Solo4k, Uno4k, Uno4k SE, Zero4k, Octagon SF4008, AX HD51, Dreambox 900, Solo2, SoloSE v2, Zero, VU+Duo, Xtrend ET-9000, ET-9200, ET7000mini, Force1, Spark2, GI Fly и др.
Поблагодарить Z707779886070, E342760518570, R341155895525,  MasterCard 5168 7422 4047 5503monobank 5375 4141 1455 0253

Voevoda

Ура, всего полтора года ожидания и я его купил.

Voevoda

Подскажите, какой из CI Plus ставить и какой имидж из OpenPli лучше ?
Попробовал 7.0 и 7.1, но на них CI Plus не стал (тот для которого интернет нужен) тупо умирает рес, перезагрузка и на загрузке затык.

CAAXOB

Цитата: Voevoda від 26 Вересень 2019, 15:22:10Подскажите, какой из CI Plus ставить и какой имидж из OpenPli лучше ?
Попробовал 7.0 и 7.1, но на них CI Plus не стал (тот для которого интернет нужен) тупо умирает рес

Ну так ручками попробуйте установить :

Spoiler
https://github.com/Ednaz/e2binary/archive/master.zip

Для замены бинарника останавливаем энигму командой в телнет `init 4`

Меняем бинарник по пути `/usr/bin/` , проверяем права у бинарника `755`

Файл `enigma.pyo` ложим по пути `/usr/lib/enigma2/python/`

Для ресиверов gi et11000, formuler4turbo, gbquad4k, gbue4k, lunix3-4k, lunix4k, vuduo, vusolo, vuultimo, vuuno
скопируйте сертификаты в `/etc/ssl/certs/` и присвойте им права `777`

Далее reboot

Voevoda

Спасибо друзья!
Вроде встало всё. Правда без телнета и прочих извращений.

Voevoda

Всё поломалось без причины.
Разобрался с фтп и атрибутами, установил как надо.
Начал ставить enigma2-plugin-systemplugins-ciplusinstall_1.6-r0-openpli_7.0-release_7.1-release_all и всё рухнуло. Точнее, установилось, потом перезапуск и вечный load.
Интернет есть, всё работало. Не знаю что уже делать.

Oleg_satelit

Восстановительный имидж для GI ET-11000 попробовать.
VU+ DUO 4K SE    GI ET 11000 4K