Обсуждение ресивера GI ET11000

[SHURIK1969]

Какие  usb wi-fi адаптеры подходят для ресивера точно, может кто напишет  точные модели?

[sety]

Какие  usb wi-fi адаптеры подходят для ресивера точно

SHURIK1969, Нужно не ресивер под адапторы покупать а наоборот

[Ednaz]

SHURIK1969, RT5370 точно работает.

[nikolasi]

Да помоему практически все свистки пашут. Просто ставите нужный драйвер под ваш свисток и все

[Ednaz]

nikolasi, mt7601 не работает

[nikolasi]

Ну я имею в виду распространенные свистки. Тплинки серий н и г и другие. А на экзотику нужно собирать самому

[Ednaz]

Коля, да 7601 не работают даже те, которые и ты и я собирали сами.
А 7601 очень распространенный адаптер на сегодня.

[nikolasi]

 Он есть у тебя? Вид-пид какой у него?

[Ednaz]

Он есть у меня.
Bus 002 Device 007: ID 148f:7601 Ralink Technology, Corp. MT7601U Wireless Adapter

На мипс ресиверах он работает.

[nikolasi]

пробни это собрано на гите атв 6.2 чуть подправил под ядра 4.Х

[Vasiliks]

nikolasi, у меня на пли , к сожалению, свисток не увидал.

[nikolasi]

А все пакеты встали? Установились? На пли? Если ла покажите команду dmesg в телнете когда свисток воткнут в тюнер

[Vasiliks]

Если ла покажите команду dmesg в телнете когда свисток воткнут в тюнер

со свистком после полной перезагрузки

Spoiler

openpli homebuild et1x000

et1x000 login: root
root@et1x000:~# dmesg
Booting Linux on physical CPU 0x0
Linux version 4.1.37 (oe-user@oe-host) (gcc version 6.3.0 (GCC) ) #1 SMP Sat Feb 16 15:19:45 CET 2019
CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: ET1x000_EMMC_DDR3_NOAVS
moving dtb from 0x0000000007628000 to 0x0000000000977a84
bmem: Reserved 700 MiB at 0x0000000014400000
cma: Reserved 16 MiB at 0x0000000012c00000
Forcing write-allocate cache policy for SMP
Memory policy: Data cache writealloc
On node 0 totalpages: 262144
  DMA zone: 632 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 80896 pages, LIFO batch:15
  HighMem zone: 181248 pages, LIFO batch:31
PERCPU: Embedded 12 pages/cpu @d23ae000 s16396 r8192 d24564 u49152
pcpu-alloc: s16396 r8192 d24564 u49152 alloc=12*4096
pcpu-alloc:

• 0
• 1
  Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261512
  Kernel command line: root=/dev/mmcblk0p4 rootwait rw vmalloc=692m bmem=700m@324m
  PID hash table entries: 2048 (order: 1, 8192 bytes)
  Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  Memory: 296748K/1048576K available (6801K kernel code, 228K rwdata, 2132K rodata, 296K init, 190K bss, 735444K reserved, 16384K cma-reserved, 8188K highmem)
  Virtual kernel memory layout:
      vector  : 0xffff0000 - 0xffff1000   (   4 kB)
      fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
      vmalloc : 0xd4000000 - 0xff000000   ( 688 MB)
      lowmem  : 0xc0000000 - 0xd3c00000   ( 316 MB)
      pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
      modules : 0xbf000000 - 0xbfe00000   (  14 MB)
        .text : 0xc0008000 - 0xc08c1b6c   (8935 kB)
        .init : 0xc08c2000 - 0xc090c000   ( 296 kB)
        .data : 0xc090c000 - 0xc09450d0   ( 229 kB)
         .bss : 0xc0948000 - 0xc0977a84   ( 191 kB)
  Hierarchical RCU implementation.
          RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  NR_IRQS:16 nr_irqs:16 16
  irq_brcmstb_l2: registered L2 intc (mem: 0xd4002000, parent irq: 93)
  irq_brcmstb_l2: registered L2 intc (mem: 0xd4008000, parent irq: 64)
  irq_brcmstb_l2: registered L2 intc (mem: 0xd400a640, parent irq: 95)
  irq_brcmstb_l2: registered L2 intc (mem: 0xd400c200, parent irq: 58)
  irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
  irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd400e380, parent IRQ(s): 3)
  MCP: Enabling write pairing
  Architected cp15 timer(s) running at 27.00MHz (virt).
  clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
  sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
  Switching to timer-based delay loop, resolution 37ns
  Console: colour dummy device 80x30
  Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
  pid_max: default: 32768 minimum: 301
  Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  CPU: Testing write buffer coherency: ok
  CPU0: update cpu_capacity 1024
  CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  Setting up static identity map for 0x8440 - 0x8498
  CPU1: update cpu_capacity 1024
  CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  Brought up 2 CPUs
  SMP: Total of 2 processors activated (108.00 BogoMIPS).
  CPU: All CPU(s) started in SVC mode.
  devtmpfs: initialized
  VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
  clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  NET: Registered protocol family 16
  DMA: preallocated 256 KiB pool for atomic coherent allocations
  cpuidle: using governor ladder
  cpuidle: using governor menu
  hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  hw-breakpoint: maximum watchpoint size is 8 bytes.
  Broadcom Brahma-B15 readahead cache at: 0xd410e478
  vgaarb: loaded
  SCSI subsystem initialized
  libata version 3.00 loaded.
  usbcore: registered new interface driver usbfs
  usbcore: registered new interface driver hub
  usbcore: registered new device driver usb
  media: Linux media interface: v0.10
  Linux video capture interface: v2.00
  Advanced Linux Sound Architecture Driver Initialized.
  Bluetooth: Core ver 2.20
  NET: Registered protocol family 31
  Bluetooth: HCI device and connection manager initialized
  Bluetooth: HCI socket layer initialized
  Bluetooth: L2CAP socket layer initialized
  Bluetooth: SCO socket layer initialized
  Switched to clocksource arch_sys_counter
  FS-Cache: Loaded
  thermal thermal_zone0: failed to read out thermal zone (-22)
  NET: Registered protocol family 2
  TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  TCP: Hash tables configured (established 4096 bind 4096)
  UDP hash table entries: 256 (order: 1, 8192 bytes)
  UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  NET: Registered protocol family 1
  RPC: Registered named UNIX socket transport module.
  RPC: Registered udp transport module.
  RPC: Registered tcp transport module.
  RPC: Registered tcp NFSv4.1 backchannel transport module.
  PCI: CLS 0 bytes, default 64
  CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
  hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
  futex hash table entries: 512 (order: 3, 32768 bytes)
  NFS: Registering the id_resolver key type
  Key type id_resolver registered
  Key type id_legacy registered
  nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  fuse init (API version 7.23)
  bounce: pool size: 64 pages
  Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  io scheduler noop registered
  io scheduler deadline registered
  io scheduler cfq registered (default)
  brcm-gisb-arb f0400000.gisb-arb: registered mem: d4134000, irqs: 261, 262
  brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
  brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
  brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
  brcm-pci f0460000.pcie: cannot get msi intr; MSI disabled
  brcm-pci f0460000.pcie: down
  brcm-waketimer f0417580.waketimer: rtc core: registered brcmstb-waketmr as rtc0
  brcm-waketimer f0417580.waketimer: registered, with irq 263
  Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  console [ttyS0] disabled
  f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
  console [ttyS0] enabled
  of_serial: probe of f040a940.serial failed with error -28
  of_serial: probe of f040a980.serial failed with error -28
  [drm] Initialized drm 1.1.0 20060810
  brd: module loaded
  loop: module loaded
  brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
  brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
  brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
  brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
  scsi host0: brcm-ahci
  scsi host1: brcm-ahci
  ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
  ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
  brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
  brcmstb_qspi f03e3400.spi: using bspi-mspi mode
  m25p80 spi32766.0: found mx25l6405d, expected m25p80
  m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
  6 ofpart partitions found on MTD device spi32766.0
  Creating 6 MTD partitions on "spi32766.0":
  0x000000000000-0x000000200000 : "flash0.bolt"
  0x000000200000-0x000000240000 : "flash0.macadr"
  0x000000240000-0x000000280000 : "flash0.nvram"
  0x000000280000-0x000000300000 : "flash0.devtree"
  0x000000300000-0x000000800000 : "flash0.avail0"
  0x000000000000-0x000000800000 : "flash0"
  libphy: Fixed MDIO Bus: probed
  bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
  bcmgenet f0b00000.ethernet: failed to get enet-mux clock
  libphy: bcmgenet MII bus: probed
  usbcore: registered new interface driver r8152
  hso: /home/vasiliks/openpli-oe-core/build/tmp/work-shared/et1x000/kernel-source/drivers/net/usb/hso.c: Option Wireless
  ata1: SATA down (SStatus 0 SControl 300)
  usbcore: registered new interface driver hso
  usbcore: registered new interface driver cdc_ether
  usbcore: registered new interface driver ipheth
  xhci-brcm: xHCI BRCM driver
  xhci-brcm f0471000.xhci_v2: xHCI Host Controller
  xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
  xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
  xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
  hub 1-0:1.0: USB hub found
  hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
  xhci-brcm f0471000.xhci_v2: xHCI Host Controller
  xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
  usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  hub 2-0:1.0: USB hub found
  hub 2-0:1.0: 2 ports detected
  ehci-brcm: EHCI BRCM driver
  ehci-brcm f0470300.ehci_v2: EHCI Host Controller
  ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
  ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
  ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
  ata2: SATA down (SStatus 0 SControl 300)
  hub 3-0:1.0: USB hub found
  hub 3-0:1.0: 1 port detected
  ehci-brcm f0470500.ehci_v2: EHCI Host Controller
  ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
  ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
  ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
  hub 4-0:1.0: USB hub found
  hub 4-0:1.0: 1 port detected
  ohci-brcm: OHCI BRCM driver
  ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
  ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
  ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
  hub 5-0:1.0: USB hub found
  hub 5-0:1.0: 1 port detected
  ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
  ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
  ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
  hub 6-0:1.0: USB hub found
  hub 6-0:1.0: 1 port detected
  ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  ehci-pci: EHCI PCI platform driver
  ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  ohci-pci: OHCI PCI platform driver
  usbcore: registered new interface driver cdc_acm
  cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  usbcore: registered new interface driver cdc_wdm
  usbcore: registered new interface driver usb-storage
  mousedev: PS/2 mouse device common for all mice
  usbcore: registered new interface driver appletouch
  usbcore: registered new interface driver bcm5974
  usbcore: registered new interface driver synaptics_usb
  i2c /dev entries driver
  brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
  usbcore: registered new interface driver btusb
  sdhci: Secure Digital Host Controller Interface driver
  sdhci: Copyright(c) Pierre Ossman
  sdhci-pltfm: SDHCI platform and OF driver helper
  sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
  sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
  mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
  sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
  sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
  usb 3-1: new high-speed USB device number 2 using ehci-brcm
  usb 4-1: new high-speed USB device number 2 using ehci-brcm
  mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
  hidraw: raw HID events driver (C) Jiri Kosina
  usbcore: registered new interface driver usbhid
  usbhid: USB HID core driver
  Initializing XFRM netlink socket
  NET: Registered protocol family 17
  NET: Registered protocol family 15
  Key type dns_resolver registered
  Registering SWP/SWPB emulation handler
  brcm-waketimer f0417580.waketimer: setting system clock to 1970-01-01 00:00:05 UTC (5)
  ALSA device list:
    No soundcards found.
  Waiting for root device /dev/mmcblk0p4...
  mmc1: MAN_BKOPS_EN bit is not set
  mmc1: new high speed MMC card at address 0001
  mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
  mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
  mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
  mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
  mmcblk0: p1 p2 p3 p4
  usb 2-2: new SuperSpeed USB device number 2 using xhci-brcm
  usb-storage 2-2:1.0: USB Mass Storage device detected
  scsi host2: usb-storage 2-2:1.0
  EXT4-fs (mmcblk0p4): warning: maximal mount count reached, running e2fsck is recommended
  EXT4-fs (mmcblk0p4): 1 orphan inode deleted
  EXT4-fs (mmcblk0p4): recovery complete
  EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
  VFS: Mounted root (ext4 filesystem) on device 179:4.
  devtmpfs: mounted
  Freeing unused kernel memory: 296K (c08c2000 - c090c000)
  blk_update_request: I/O error, dev mtdblock5, sector 16256
  blk_update_request: I/O error, dev mtdblock5, sector 16256
  Buffer I/O error on dev mtdblock5, logical block 2032, async page read
  blk_update_request: I/O error, dev mtdblock5, sector 0
  blk_update_request: I/O error, dev mtdblock5, sector 8
  blk_update_request: I/O error, dev mtdblock5, sector 0
  Buffer I/O error on dev mtdblock5, logical block 0, async page read
  blk_update_request: I/O error, dev mtdblock4, sector 10112
  blk_update_request: I/O error, dev mtdblock4, sector 10112
  Buffer I/O error on dev mtdblock4, logical block 1264, async page read
  blk_update_request: I/O error, dev mtdblock4, sector 0
  blk_update_request: I/O error, dev mtdblock4, sector 8
  blk_update_request: I/O error, dev mtdblock4, sector 0
  Buffer I/O error on dev mtdblock4, logical block 0, async page read
  Buffer I/O error on dev mtdblock3, logical block 112, async page read
  Buffer I/O error on dev mtdblock3, logical block 0, async page read
  Buffer I/O error on dev mtdblock2, logical block 48, async page read
  Buffer I/O error on dev mtdblock2, logical block 0, async page read
  Buffer I/O error on dev mtdblock1, logical block 48, async page read
  Buffer I/O error on dev mtdblock1, logical block 0, async page read
  scsi 2:0:0:0: Direct-Access     HGST HTS 541010B7E610     0203 PQ: 0 ANSI: 6
  sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  sd 2:0:0:0: Attached scsi generic sg0 type 0
  sd 2:0:0:0: [sda] Write Protect is off
  sd 2:0:0:0: [sda] Mode Sense: 47 00 00 08
  sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  sda: sda1
  sd 2:0:0:0: [sda] Attached SCSI disk
  random: nonblocking pool is initialized
  DVB: registering new adapter (et11000)
  platform et11000.0: DVB: registering adapter 0 frontend 0 (AVL6211)...
  input: dreambox remote control (native) as /devices/virtual/input/input0
  EXT4-fs (mmcblk0p4): re-mounted. Opts: data=ordered
  mt7601Usta: disagrees about version of symbol alloc_etherdev_mqs
  mt7601Usta: Unknown symbol alloc_etherdev_mqs (err -22)
  mt7601Usta: disagrees about version of symbol skb_put
  mt7601Usta: Unknown symbol skb_put (err -22)
  mt7601Usta: disagrees about version of symbol unregister_netdevice_queue
  mt7601Usta: Unknown symbol unregister_netdevice_queue (err -22)
  mt7601Usta: disagrees about version of symbol pskb_expand_head
  mt7601Usta: Unknown symbol pskb_expand_head (err -22)
  mt7601Usta: disagrees about version of symbol wake_up_process
  mt7601Usta: Unknown symbol wake_up_process (err -22)
  mt7601Usta: disagrees about version of symbol eth_type_trans
  mt7601Usta: Unknown symbol eth_type_trans (err -22)
  mt7601Usta: disagrees about version of symbol skb_copy_expand
  mt7601Usta: Unknown symbol skb_copy_expand (err -22)
  mt7601Usta: disagrees about version of symbol init_net
  mt7601Usta: Unknown symbol init_net (err -22)
  mt7601Usta: disagrees about version of symbol skb_pull
  mt7601Usta: Unknown symbol skb_pull (err -22)
  mt7601Usta: disagrees about version of symbol dev_close
  mt7601Usta: Unknown symbol dev_close (err -22)
  mt7601Usta: disagrees about version of symbol skb_push
  mt7601Usta: Unknown symbol skb_push (err -22)
  mt7601Usta: disagrees about version of symbol wireless_send_event
  mt7601Usta: Unknown symbol wireless_send_event (err -22)
  mt7601Usta: disagrees about version of symbol register_netdev
  mt7601Usta: Unknown symbol register_netdev (err -22)
  mt7601Usta: disagrees about version of symbol free_netdev
  mt7601Usta: Unknown symbol free_netdev (err -22)
  mt7601Usta: disagrees about version of symbol netif_tx_wake_queue
  mt7601Usta: Unknown symbol netif_tx_wake_queue (err -22)
  mt7601Usta: disagrees about version of symbol netif_rx
  mt7601Usta: Unknown symbol netif_rx (err -22)
  mt7601Usta: disagrees about version of symbol __netdev_alloc_skb
  mt7601Usta: Unknown symbol __netdev_alloc_skb (err -22)
  mt7601Usta: disagrees about version of symbol skb_trim
  mt7601Usta: Unknown symbol skb_trim (err -22)
  mt7601Usta: disagrees about version of symbol __dev_kfree_skb_any
  mt7601Usta: Unknown symbol __dev_kfree_skb_any (err -22)
  mt7601Usta: disagrees about version of symbol netif_carrier_off
  mt7601Usta: Unknown symbol netif_carrier_off (err -22)
  mt7601Usta: disagrees about version of symbol skb_clone
  mt7601Usta: Unknown symbol skb_clone (err -22)
  mt7601Usta: disagrees about version of symbol dev_get_by_name
  mt7601Usta: Unknown symbol dev_get_by_name (err -22)
  mt7601Usta: disagrees about version of symbol netif_carrier_on
  mt7601Usta: Unknown symbol netif_carrier_on (err -22)
  mt7601Usta: disagrees about version of symbol register_netdevice
  mt7601Usta: Unknown symbol register_netdevice (err -22)
  f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
  bcmgenet f0b00000.ethernet: configuring instance for internal PHY
  bcmgenet f0b00000.ethernet eth0: Link is Down
  bcmgenet f0b00000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
  NET: Registered protocol family 10
  sd 2:0:0:0: [sda] Sense Key : 0x1 [current]
  sd 2:0:0:0: [sda] ASC=0x37 ASCQ=0x0
  root@et1x000:~#
  

Spoiler

root@et1x000:~# lsusb
Bus 002 Device 002: ID 152d:0578
Bus 003 Device 002: ID 148f:7601
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0003
Bus 003 Device 001: ID 1d6b:0002
Bus 004 Device 001: ID 1d6b:0002
Bus 005 Device 001: ID 1d6b:0001
Bus 006 Device 001: ID 1d6b:0001
root@et1x000:~#

[nikolasi]

Прикольно. В общем то что дает производитель этого свистка а именно архив для сборки драйаера вы видите в логе. Даже правив под ядро 4 оно козлит ошибками. А потому что в архиве максимум что есть это под кернер 3.7.ок пойдем другим путем тогда. Но странно что производителю свистка побоку новые ядра. Таже проблема и на убунту с ним. Но решить ее можна думаю. Чуть позже скину драйвер собраный вместе с ядром 4.1. Думаю это будет работать

[nikolasi]

еще раз пробуем.это собрано на гите атв 6.2 логично пробнуть на ней
пакет установить драйвера. с архива ниже MT7601.bin закинуть в /lib/firmware/mt7601u.bin