Сборки имиджей для Octagon SF4008 (обсуждения)

[romansat]

Ставил во флеш оба имиджа.

От Николая как всегда упирается в

Код Виділити Розширити

Starting  platform-util и дальше booting...
Также не грузится из мультибута.

От Эдуарда удачно грузится из флеши.
Вчерашних заморочек с падением системы после opkg update нет.
Также сразу примонтировался HDD.

Логи прилагаю.

Сейчас попробую от Эдуарда в мультибут,удалив RMP.

[romansat]

Сборка Poweron из мультибута загрузилась с третьего раза.
Но после opkg update и перезагрузки перестает видется в мультибуте и грузится имидж с флеши.
RMP из имиджа во флеши предварительно удален корректно,подчищены все хвосты при помощи

Код Виділити Розширити


root@sf4008:~# find / -name *russianmediapark*

Пробовал из нескольких флешек.

Так что этот имидж может работать только как основной из флеши. 

Буду пробовать теперь наоборот,установить powerOn как основной во флеш,а ATV из мультибута.

Kodi 17.6 работает,надо удалить старый драйвер и переименовать новый на linuxtv.ko

[romansat]

Ednaz

Установил на твой имидж Меобут от Николая отсюда

https://gisclub.tv/vu-uno-4k-obsuzhdenie/vuuno4k/msg457641/#msg457641

Добавил нужные зависимости,Меобут установился.
Пробовал установить сначала свои бэкапы имиджей в .zip,они установились,но не грузятся,потом пробовал чистые имиджи.
Также не пошло.
В логе паника и падение ядра.
Показывает что в MbootM почему то не установлены стартовые скрипты.

Какой плагин можно установить на твой имидж для переноса своих бэкапов на флешку?
Или может встроишь Меобут в свою следующую сборку?

Пока вынужден держать все свои имиджи каждый на отдельной флешке и при необходимости грузить во флеш отдельные имиджи с разных флешек.

Spoiler

CPU 01
BCM74390011
PRID07251111
v1.19
RR:00000003
BFW
seclib-1.9
BBL v1.0.1
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 2a002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
select_image: addr_offset: 00055000 part_offset: 00000000 bootStatus: 3d2b2500
MEMSYS-STD
SHMOO 02010000 BLD:11138 HW:hpf0_b1p6 V:2.1.0.0
MCB: FIX
AVS start:status=000000ff
STB: Current voltage=00000388(904)
temperature=0000e808(59400)
PV=0000034a(842)
MV=00000388(904)
AVS FW rev=30333278 [0.3.2.x]
OK
DDR0: *@ ffe0c7c8 <= ffe0c7c8 MEMSYS-0 @ f1100000 OK
DDR1: -
Sdram Scramble OTP = 0x00000001
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 1b25252b
BFW load mode OTP = 0x0000000f
bfw_hash_locked = 0x00000000
BFW key3 OK, BFW load OK
BFW v2.1.0
COPY CODE... DONE
MICH: disable success
SSBL
PINMUX
CACHE FLUSH OK
MMU ON
CACHE FLUSH OK
_fbss  0704e420
_ebss  0704fc88
_end   0704fca8
HEAP @ 07100000
STACK @ 09200000
ARCH: CONFIG OK
CLR BSS 0704e420 to 0704fc88 OK
CLR SRAM  OK
CACHE FLUSH OK
CPU CLKSET OK
GO!

    ,/
  ,'/___, BOLT v1.19 v1.19 LOCAL BUILD
.'__  ,'  (2016-10-14 22:06:19 doolgun@ubuntu)
   /,'    Copyright (C) 2016 Broadcom
  /'

Board: SF4008_EMMC_DDR4
SYS_CTRL: product=72511, family=7439b1, strap=000000b2,
otp @ 0xf0404030 = 0x822080e0: en_cr(0x00000060) en_testport(0x00000080) macrovision_disable(0x02000000) memsys_1_disable(0x00008000) moca_disable(0x80000000) rv9_disable(0x00200000)
otp @ 0xf0404034 = 0x00000461: moca2_disable(0x00000001) pcie1_disable(0x00000040) rfm_disable(0x00000020) sata1_disable(0x00000400)
CPU: 2x B15 [420f00f3] 1719 MHz
SCB: 432 MHz
DDR0 @ 1200MHz, DDR1 N/A
RESET CAUSE: 0x000003 main_chip_input power_on (2 of 23 possible causes)
CS0: SFDP SPI, 8MB, 64kB blocks, 64kB erase block, 256B pages
RTS0: 0x1101004, 256 clients, ok
RTS1: 0x1181004, 256 clients, ok
BOX MODE: 1
AVS: park check
AVS: temperature monitoring enabled
AVS: STB: V=0.903V, T=+59.887C, PV=0.842V, MV=0.904V, FW=30333278 [0.3.2.x]
USB otp=00000040
Board version 0.92
HCS16SM18T Init
HCS16SM18T Reset
usb: resetting device on bus 1 hub 1 port 1
USB: New high speed device connected to bus 1 hub 1 port 1
usb: resetting device on bus 1 hub 2 port 3
USB: New high speed device connected to bus 1 hub 2 port 3
usb: resetting device on bus 1 hub 3 port 2
USB: New high speed device connected to bus 1 hub 3 port 2
usb: found Mass-Storage Device 8564:1000
USBMASS: Unit 0 connected
Power Btn Init
LED Init
HDD Power Init
[ssbl/main/linux_dvb_7439.c::linux_dvb_usb_upgrade(653)] LINUX_DVB_DIR_PATH: sf4008
checking usbmass for upgrade
*** JetFlash Transcend 8GB     (8032 MB, lbs=512) ***
*** Could not find a valid partition...status=00000000, ids=83000000!
Could not init file system: File system not recognized
*** JetFlash Transcend 8GB     (8032 MB, lbs=512) ***
*** Could not find a valid partition...status=00000000, ids=83000000!
Could not init file system: File system not recognized
*** JetFlash Transcend 8GB     (8032 MB, lbs=512) ***
*** Could not find a valid partition...status=00000000, ids=83000000!
Could not init file system: File system not recognized
*** JetFlash Transcend 8GB     (8032 MB, lbs=512) ***
*** Could not find a valid partition...status=00000000, ids=83000000!
Could not init file system: File system not recognized
*** JetFlash Transcend 8GB     (8032 MB, lbs=512) ***
*** Could not find a valid partition...status=00000000, ids=83000000!
Could not init file system: File system not recognized
no upgrade found
Loader:zimg Filesys:raw Dev:emmcflash0.kernel File: Options:(null)
Reading 3484152 bytes from zImage...........
Starting program at 0x8000 (DTB @ 0x7628000)

32 bit boot...
Booting Linux on physical CPU 0x0
Linux version 4.1.37 (eduard@kubuntu) (gcc version 6.2.0 (GCC) ) #2 SMP Sun Feb 4 22:14:48 EET 2018
CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Machine model: SF4008_EMMC_DDR4
moving dtb from 0x0000000007628000 to 0x00000000009a12ac
bmem: Reserved 700 MiB at 0x0000000014400000
cma: Reserved 16 MiB at 0x0000000012c00000
Forcing write-allocate cache policy for SMP
Memory policy: Data cache writealloc
PERCPU: Embedded 12 pages/cpu @d23ae000 s16396 r8192 d24564 u49152
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 261512
Kernel command line: root=/dev/mmcblk0p4 rootwait rw vmalloc=692m bmem=700m@324m
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 296580K/1048576K available (6953K kernel code, 220K rwdata, 2132K rodata, 304K init, 204K bss, 735612K reserved, 16384K cma-reserved, 8188K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xd4000000 - 0xff000000   ( 688 MB)
    lowmem  : 0xc0000000 - 0xd3c00000   ( 316 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc08e7b68   (9087 kB)
      .init : 0xc08e8000 - 0xc0934000   ( 304 kB)
      .data : 0xc0934000 - 0xc096b3e0   ( 221 kB)
       .bss : 0xc096e000 - 0xc09a12ac   ( 205 kB)
Hierarchical RCU implementation.
        RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
irq_brcmstb_l2: registered L2 intc (mem: 0xd4002000, parent irq: 93)
irq_brcmstb_l2: registered L2 intc (mem: 0xd4008000, parent irq: 64)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400a640, parent irq: 95)
irq_brcmstb_l2: registered L2 intc (mem: 0xd400c200, parent irq: 58)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd400e380, parent IRQ(s): 3)
MCP: Enabling write pairing
Architected cp15 timer(s) running at 27.00MHz (virt).
clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
Switching to timer-based delay loop, resolution 37ns
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: update cpu_capacity 1024
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x8440 - 0x8498
CPU1: update cpu_capacity 1024
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Brought up 2 CPUs
SMP: Total of 2 processors activated (108.00 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 8 bytes.
Broadcom Brahma-B15 readahead cache at: 0xd410e478
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Initialized.
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Switched to clocksource arch_sys_counter
FS-Cache: Loaded
thermal thermal_zone0: failed to read out thermal zone (-22)
NET: Registered protocol family 2
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
FS-Cache: Netfs 'cifs' registered for caching
Key type cifs.spnego registered
fuse init (API version 7.23)
bounce: pool size: 64 pages
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
brcm-gisb-arb f0400000.gisb-arb: registered mem: d4134000, irqs: 261, 262
brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
brcm-pci f0460000.pcie: cannot get msi intr; MSI disabled
brcm-pci f0460000.pcie: down
brcm-waketimer f0417580.waketimer: rtc core: registered brcmstb-waketmr as rtc0
brcm-waketimer f0417580.waketimer: registered, with irq 263
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
console [ttyS0] disabled
f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
console [ttyS0] enabled
of_serial: probe of f040a940.serial failed with error -28
of_serial: probe of f040a980.serial failed with error -28
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
scsi host0: brcm-ahci
scsi host1: brcm-ahci
ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
brcmstb_qspi f03e3400.spi: using bspi-mspi mode
m25p80 spi32766.0: found mx25l6405d, expected m25p80
m25p80 spi32766.0: mx25l6405d (8192 Kbytes)
6 ofpart partitions found on MTD device spi32766.0
Creating 6 MTD partitions on "spi32766.0":
0x000000000000-0x000000200000 : "flash0.bolt"
0x000000200000-0x000000240000 : "flash0.macadr"
0x000000240000-0x000000280000 : "flash0.nvram"
0x000000280000-0x000000300000 : "flash0.devtree"
0x000000300000-0x000000800000 : "flash0.avail0"
0x000000000000-0x000000800000 : "flash0"
libphy: Fixed MDIO Bus: probed
bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
bcmgenet f0b00000.ethernet: failed to get enet-mux clock
libphy: bcmgenet MII bus: probed
usbcore: registered new interface driver r8152
hso: /media/myhome/openpli-oe-core/build/tmp/work-shared/sf4008/kernel-source/drivers/net/usb/hso.c: Option Wireless
usbcore: registered new interface driver hso
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver ipheth
xhci-brcm: xHCI BRCM driver
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
xhci-brcm f0471000.xhci_v2: xHCI Host Controller
xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-brcm: EHCI BRCM driver
ehci-brcm f0470300.ehci_v2: EHCI Host Controller
ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm f0470500.ehci_v2: EHCI Host Controller
ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
ata1: SATA up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD10JPVX-75JC3T0, 02.01A02, max UDMA/133
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci-brcm: OHCI BRCM driver
ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD10JPVX-75J 1A02 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 4096-byte physical blocks
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver usb-storage
ata2: SATA down (SStatus 0 SControl 300)
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
usbcore: registered new interface driver synaptics_usb
i2c /dev entries driver
brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
usbcore: registered new interface driver btusb
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-brcmstb f03e0000.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0000.sdhci: No vqmmc regulator found
mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
usb 4-1: new high-speed USB device number 2 using ehci-brcm
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
Registering SWP/SWPB emulation handler
brcm-waketimer f0417580.waketimer: setting system clock to 1970-01-01 00:00:07 UTC (7)
ALSA device list:
  No soundcards found.
Waiting for root device /dev/mmcblk0p4...
mmc1: MAN_BKOPS_EN bit is not set
mmc1: new high speed MMC card at address 0001
mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
mmcblk0: p1 p2 p3 p4
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
EXT4-fs (mmcblk0p4): recovery complete
EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 179:4.
devtmpfs: mounted
Freeing unused kernel memory: 304K (c08e8000 - c0934000)
mount: failed to read mtab: No such file or directory
MeoBoot is starting mdev
usb 4-1.3: new high-speed USB device number 3 using ehci-brcm
hub 4-1.3:1.0: USB hub found
hub 4-1.3:1.0: 4 ports detected
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 4-1.3.2: new high-speed USB device number 4 using ehci-brcm
usb-storage 4-1.3.2:1.0: USB Mass Storage device detected
scsi host2: usb-storage 4-1.3.2:1.0
scsi 2:0:0:0: Direct-Access     JetFlash Transcend 8GB    8.07 PQ: 0 ANSI: 2
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sdb] 15687680 512-byte logical blocks: (8.03 GB/7.48 GiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] No Caching mode page found
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sdb1): recovery complete
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
MeoBoot mount by Device
meoboot checking installation on:  /dev/sda1
random: nonblocking pool is initialized
MeoBoot hasn't been installed on:  /dev/sda1
meoboot checking installation on:  /dev/sdb1
MeoBoot has been installed on:  /dev/sdb1
MeoBoot is loading modules
modprobe: FATAL: Module dvb not found in directory /lib/modules/4.1.37
Loading modules: linuxtv
/sbin/init: line 156: can't create /proc/stb/video/videomode: nonexistent directory
/dev/dvb/adapter0/video0: No such file or directory
/dev/dvb/adapter0/video0: No such file or directory
Driverload end
MeoBoot is booting openatv-6.2-sf4008-20180206_usb  from  /dev/sdb1
/media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/usr/share/bootlogo.mvi: No such file or directory
mount: mount point /media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/dev does not exist
mount: mount point /media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/proc does not exist
mount: mount point /media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/sys does not exist
/sbin/init: line 156: can't create media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/usr/bin/enigma2_pre_start.sh: nonexistent directory
/sbin/init: line 156: can't create media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/usr/bin/enigma2_pre_start.sh: nonexistent directory
/sbin/init: line 156: can't create media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/usr/bin/enigma2_pre_start.sh: nonexistent directory
ok
/sbin/init: line 156: can't create media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/usr/bin/enigma2_pre_start.sh: nonexistent directory
/sbin/init: line 156: can't create media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/usr/bin/enigma2_pre_start.sh: nonexistent directory
/sbin/init: line 156: can't create media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/usr/bin/enigma2_pre_start.sh: nonexistent directory
ok
/sbin/init: line 156: can't create media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/usr/bin/enigma2_pre_start.sh: nonexistent directory
/sbin/init: line 156: can't create media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/usr/bin/enigma2_pre_start.sh: nonexistent directory
/sbin/init: line 156: can't create media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/usr/bin/enigma2_pre_start.sh: nonexistent directory
ok
chmod: media/meoboot/MbootM/openatv-6.2-sf4008-20180206_usb/usr/bin/enigma2_pre_start.sh: No such file or directory
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000

CPU1: stopping
CPU: 1 PID: 0 Comm: swapper/1 Tainted: G           O    4.1.37 #2
Hardware name: Broadcom STB (Flattened Device Tree)
[<c0016544>] (unwind_backtrace) from [<c0012594>] (show_stack+0x10/0x14)
[<c0012594>] (show_stack) from [<c069e1e4>] (dump_stack+0x84/0x98)
[<c069e1e4>] (dump_stack) from [<c0015554>] (handle_IPI+0x168/0x198)
[<c0015554>] (handle_IPI) from [<c00093cc>] (gic_handle_irq+0x5c/0x60)
[<c00093cc>] (gic_handle_irq) from [<c0013040>] (__irq_svc+0x40/0x54)
Exception stack(0xd1c7bf80 to 0xd1c7bfc8)
bf80: 00000001 00000000 00000000 c0021440 d1c7a000 c0936520 c06a5b54 00000000
bfa0: d1c7bfd0 00000000 00000001 00000000 01000000 d1c7bfc8 c000fd8c c000fd90
bfc0: 60070013 ffffffff
[<c0013040>] (__irq_svc) from [<c000fd90>] (arch_cpu_idle+0x38/0x3c)
[<c000fd90>] (arch_cpu_idle) from [<c00555e8>] (cpu_startup_entry+0x250/0x2bc)
[<c00555e8>] (cpu_startup_entry) from [<0000946c>] (0x946c)
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000000

[Ednaz]

Kodi 17.6 работает,надо удалить старый драйвер и переименовать новый на linuxtv.ko

эта правка уже внесена и будет при следующей сборке.

Установил на твой имидж Меобут от Николая отсюда

тот не будет работать на sf4008

[romansat]

тот не будет работать на sf4008

Чем пользоваться для такого случая?
Бэкапсюит не работает.
При попытке скачать с фида новый,не установился.
Чем делать бэкап?

[Ednaz]

romansat, Николая спрошу за его плаг Fullbackup. Мы его ставили везде, только Николай правил под конкретный ресивер.

[romansat]

Еще.
С бэкапсюит справился.
С грехом пополам бэкап пошел.
Но требует HDD как media/sda1,еле заставил делать бэкап на media/hdd.
Но кажется мне что бэкап туда делается некорректный,на диске не исчезает папка bi после окончания,да и кое что другое не так.

У HDD вечные проблемы,постоянно сам отваливается,не успеваю монтировать.
Монтирую media/hdd,а он постоянно или вообще не виден,или прыгает в media/sda1.

[nikolasi]

romansat пробните еще раз сборку.если пойдет буду знать теперь причину

Spoiler

[romansat]

Конечно,но позже,сейчас на работе.

[romansat]

Не пошло.

[Ednaz]

Попробуй OpenBlackHole
Если стартонет, фид нужно будет взять от 4к ресивера VU+
Либо дам, что собрало именно под SF4008, но нужно будет устанавливать и настраивать HTTP Server и изменить ссылки к нему в папке opkg. Там 2,1 гига.

[romansat]

В мультибут нормально установился.
Лог ниже.
Позже буду тестить.
Отпишусь.

[romansat]

Нет,ну это совсем другое дело чем предыдущий имидж для sf4008 на базе ЕТ11000.
Тут всё работает,эмули,HDD не отваливается и т.п.
Годный имидж.
Установил фид от vu+uno 4k.
Позже поглубже покопаю,насчет Коди и остальных примочек.

[romansat]

Ednaz
Для установки Kodi требует зависимости libcrypto1.0.0 и libssl1.0.0
На фиде они есть

Spoiler

root@sf4008:~# opkg list *libcrypto*
libcrypto-compat-0.9.7 - 1.0-r10 - Compatibility for packages that to libcrypto or libssl 0.9.7
Compatibility for packages that to libcrypto or libssl 0.9.7.
libcrypto-compat-0.9.7-dbg - 1.0-r10 - Compatibility for packages that to libcrypto or libssl 0.9.7 -
Debugging files  Compatibility for packages that to libcrypto or
libssl 0.9.7.  This   package contains ELF symbols and related sources
for debugging purposes.
libcrypto-compat-0.9.7-dev - 1.0-r10 - Compatibility for packages that to libcrypto or libssl 0.9.7 -
Development files  Compatibility for packages that to libcrypto or
libssl 0.9.7.  This   package contains symbolic links, header files, and
related items   necessary for software development.
libcrypto0.9.8 - 0.9.8x-r18.0 - Secure Socket Layer (SSL) binary and related cryptographic tools.  Secure
Socket Layer (SSL) binary and related cryptographic tools..
libcrypto1.0.0 - 1.0.2j-r0.6 - Secure Socket Layer  Secure Socket Layer (SSL) binary and related
cryptographic tools.

Spoiler

root@sf4008:~# opkg list *libssl*
libssl0.9.8 - 0.9.8x-r18.0 - Secure Socket Layer (SSL) binary and related cryptographic tools.  Secure
Socket Layer (SSL) binary and related cryptographic tools..
libssl1.0.0 - 1.0.2j-r0.6 - Secure Socket Layer  Secure Socket Layer (SSL) binary and related
cryptographic tools.

А вот ни одна либа не хочет ни устанавливаться ни скачиваться,ни через opkg install ни через opkg download.
Возвращаюсь на имидж во флеш оАТВ,спокойно коммандами скачиваю эти либы,перегружаюсь снова в OBH,пытаюсь установить скачанное с атв в обх и не устанавливается.
Делаю вывод что что-то не так либо с фидом,либо я что -то не так делаю.
Можешь подсказать как скачать эти зависимости с фида?

[Ednaz]

romansat, погоди с коди.
Ты фид брал от OpenBH?
Тебе желательно поднять HTTP Server, я скину фид для SF4008
Имидж естественно обновлять нельзя!
В остальном пока работает, не считая коди?