Обсуждение VU+Zero4k

[victor78]

Доброго вечора поділіться хтось своїм іміджом, щоб можна було настроїти шарінг і щоб були спутнікі 4,4.9 та 36 градус зі списками каналів. Завчасно дякую

[Andrey3885]

Друзья, так и не смог обновить имидж, ресивер работает, но заметил, что всё связанное с сохранением в памяти ресивера вызывает "зелёный экран". Не могу изменить настройки, не могу отсканировать спутники... Есть у кого ещё идеи, что делать?

[Andrey3885]

Здравствуйте друзья, снова вернулся к попытке перепрошить свой Zero4K. Сделал кабель-переходник RJ12 - COM-порт. Смог снять лог "неудачной" перепрошивки. Выкладываю фрагмент лога момента индикации светодиода.[spoiler]starting pid 1284, tty '': '/bin/cttyhack /bin/sh -l'
# [    3.323070] scsi 1:0:0:0: Direct-Access     General  USB Flash Disk   1100 PQ: 0 ANSI: 4
[    3.331695] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    3.338573] sd 1:0:0:0: [sda] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
[    3.348361] sd 1:0:0:0: [sda] Write Protect is off
[    3.361518] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.390160]  sda: sda1
[    3.397459] sd 1:0:0:0: [sda] Attached SCSI removable disk
[    3.468638] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    3.494274] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[    3.515569] EXT4-fs warning (device mmcblk0p7): ext4_clear_journal_err:4736: Filesystem error recorded from previous mount: IO failure
[    3.527696] EXT4-fs warning (device mmcblk0p7): ext4_clear_journal_err:4737: Marking fs in need of filesystem check.
[    3.538721] EXT4-fs (mmcblk0p7): warning: mounting fs with errors, running e2fsck is recommended
[    3.547892] EXT4-fs (mmcblk0p7): recovery complete
[    3.552917] EXT4-fs (mmcblk0p7): mounted filesystem with journalled data mode. Opts: data=journal
[    3.575485] EXT4-fs error (device mmcblk0p7): ext4_mb_generate_buddy:757: group 1, block bitmap and bg descriptor inconsistent: 27440 vs 27442 free clusters
[    3.589558] Aborting journal on device mmcblk0p7-8.
[    3.595053] EXT4-fs (mmcblk0p7): Remounting filesystem read-only
[    3.601088] EXT4-fs error (device mmcblk0p7) in ext4_free_blocks:4873: Journal has aborted
[    3.609582] EXT4-fs error (device mmcblk0p7) in ext4_ext_remove_space:3042: IO failure
[    3.617734] EXT4-fs error (device mmcblk0p7) in ext4_ext_truncate:4654: Journal has aborted
[    3.626308] EXT4-fs error (device mmcblk0p7) in ext4_reserve_inode_write:4980: Journal has aborted
[    3.635496] EXT4-fs error (device mmcblk0p7) in ext4_truncate:3808: Journal has aborted
[    3.643722] EXT4-fs error (device mmcblk0p7) in ext4_reserve_inode_write:4980: Journal has aborted
[    3.652911] EXT4-fs error (device mmcblk0p7) in ext4_orphan_del:2987: Journal has aborted
[    3.661311] EXT4-fs error (device mmcblk0p7) in ext4_reserve_inode_write:4980: Journal has aborted
[    4.041959] bcmgenet f0480000.ethernet eth0: Link is Down
[    4.245444] EXT4-fs error (device mmcblk0p7): ext4_put_super:789: Couldn't clean up the journal
[   57.072197] random: nonblocking pool is initialized[/spoiler]Также прикрепил полный лог[spoiler]Terminal log file
Date: 02.04.2024 - 16:30:15
-----------------------------------------------
ю<0>CPU 01
BCM72600000
PRID07260400
v1.32
RR:00000003
BFW
seclib-1.11
BBL v3.1.1
AVS init...
AVS init OK
AVS load:select_image: addr_offset: 00051000 part_offset: 00000000 bootStatus: 10002b00
AVS load_code offset =00051000
LOADED
AVS: overtemp mon ON

single board
select_image: addr_offset: 00056000 part_offset: 00000000 bootStatus: 302b2500
MEMSYS-ALT
SHMOO 03040016 BLD:memsys_7260a_3.4.0.0_take2-39-gc791dfd02 HW:hpg0_b2p1 shmoo_ver:3.4.0.22
MCB: FLEX
AVS start:status=000000ff
STB: Current voltage=000003d1(977)
temperature=00009a09(39433)
PV=0000033a(826)
MV=000003d1(977)
CPU: Current voltage=000003d0(976)
temperature=00009a09(39433)
PV=0000032b(811)
MV=000003d0(976)
AVS FW rev=30353078 [0.5.0.x]
OK
DDR0: !@ ffe07800 <= ffe06c70 MEMSYS-0 @ f1100000 OK
Sdram Scramble OTP = 0x00000001
Sdram Scramble OK
select_image: addr_offset: 00020000 part_offset: 00000000 bootStatus: 2025252b
BFW load mode OTP = 0x0000000f
bfw_hash_locked = 0x00000000
BFW key3 OK, BFW load OK
BFW v4.2.3
INFO v00000003
COPY CODE... DONE
MICH: disable success
SSBL
SEC: jtag debug status: 000000af
PINMUX
CACHE FLUSH OK
CLR PSCI MEM @ 06400000 OK
INSTALL smm64@06400000 OK
MMU ON
CACHE FLUSH OK
_fbss  070660a0
_ebss  0706b438
_end   0706b458
HEAP @ 07100000
STACK @ 09200000
ARCH: CONFIG OK
CLR BSS 070660a0 to 0706b438 OK
CLR SRAM  OK
CACHE FLUSH OK
CPU CLKSET OK
GO!
PSCI: Init...
PSCI: config @ 0000000006402d00 cpus:2 cpu idx:0
cpu 0 state:5
cpu 1 state:0
PSCI: v0.2

    ,/   
  ,'/___, BOLT v1.32 v1.32 LOCAL BUILD
.'__  ,'  (2018-07-27 13:33:44 Vuplus team)
   /,'    Copyright (C) 2018 Broadcom
  /'     

Board: BCM972604USFF
SYS_CTRL: product=72604, family=7260a0, strap=0000019e,00000011
otp @ 0xf0404030 = 0x000000e0: en_cr(0x00000060) en_testport(0x00000080)
otp @ 0xf0404034 = 0x00804000: macrovision_disable(0x00800000) mtsif_enc_ctl_disable(0x00004000)
RESET CAUSE: 0x000003 main_chip_input power_on (2 of 24 possible causes)
RTS0: 0x21101004, 256 clients, ok
BOX MODE: 4
CPU: 2x B53 [420f1000] 1503 MHz
SCB: 388 MHz
SYSIF: 1002 MHz
DDR0 @ 1200MHz
SPLASH: starting
SPLASH BMEM init @ 7dffffff
SPLASH: Old format file in flash. Use splash_create_flash_file to create newer format.
Loaded BMP: W=720 H=480
SPLASH: audio not present
AVS: park check
AVS: temperature monitoring enabled
AVS: STB: V=0.978V, T=+40.407C, PV=0.826V, MV=0.977V, FW=30353078 [0.5.0.x]
AVS: CPU: V=0.967V, T=+40.407C, PV=0.811V, MV=0.976V
boot device name [flash1]
waiting for usb...
usb: resetting device on bus 0 hub 1 port 1


USB: New high speed device connected to bus 0 hub 1 port 1

usb: found Mass-Storage Device 090c:1000

USBMASS: Unit 0 connected

done
checking usb
Found high priority Mass Storage bus = 0, index  = 0
checking front key
readFrontKey 0 0
Check ignore.update file
Checking usbdisk0:/vuplus/zero4k/ignore.update......NO
Check force.update file
Checking usbdisk0:/vuplus/zero4k/force.update......YES
bolt update ...Checking usbdisk0:/vuplus/zero4k/bolt_auto.bin......NO
Checking usbdisk0:/vuplus/zero4k/rootfs.tar.bz2......YES
Checking usbdisk0:/vuplus/zero4k/splash_auto.bin......YES
Checking usbdisk0:/vuplus/zero4k/kernel_auto.bin......YES
Checking usbdisk0:/vuplus/zero4k/reboot.update......NO
Update
Reading usbdisk0:/vuplus/zero4k/bolt_auto.bin: Reading usbdisk0:/vuplus/zero4k/bolt_auto.bin:  >> Failed.: File not found
Reading usbdisk0:/vuplus/zero4k/splash_auto.bin: Reading usbdisk0:/vuplus/zero4k/splash_auto.bin:  >> .
Done. 1036854 bytes read
Programming...
done. 1036854 bytes written
Reading usbdisk0:/vuplus/zero4k/initrd_auto.bin: Reading usbdisk0:/vuplus/zero4k/initrd_auto.bin:  >> .......
Done. 11370198 bytes read
Programming...
done. 11370198 bytes written
Reading usbdisk0:/vuplus/zero4k/kernel_auto.bin: Reading usbdisk0:/vuplus/zero4k/kernel_auto.bin:  >> ...
Done. 4481528 bytes read
Programming...
done. 4481528 bytes written
Checking usbdisk0:/vuplus/zero4k/rootfs.tar.bz2......YES
Flashing ..Loader:zimg Filesys:raw Dev:flash0.initrd File:(null) Options:(null)
Reading up to 33554432 bytes from Image.....
Starting program at 0x80000 (DTB @ 0x7618000)

64 bit PSCI boot...
PSCI: DTB @ 0000000007618000, Linux entry @ 0000000000080000
PWR_UP-CPU1 OK
BOOT64
ADDR-CPU1  0000000006402628 @ RDB: 20452008
ON-CPU1  00000002 @ 2020248c
GO-CPU1 @ 0000000000080f20
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.1.20-1.9 (gdhan@Notebook) (gcc version 4.8.5 (Broadcom stbgcc-4.8-1.5) ) #8 SMP Thu May 11 20:43:31 KST 2017
[    0.000000] CPU: AArch64 Processor [420f1000] revision 0
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] alternatives: enabling workaround for ARM erratum 845719
[    0.000000] moving dtb from 0x0000000007618000 to 0x0000000000000000
[    0.000000] brcmstb_memory_get_default_reserve: Split region 0x0000000070000000@0x0000000010000000, reserve will fail
[    0.000000] cma: Reserved 16 MiB at 0x000000007cc00000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] PERCPU: Embedded 16 pages/cpu @ffffffc07deed000 s27904 r8192 d29440 u65536
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 509040
[    0.000000] Kernel command line:
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] software IO TLB [mem 0x76e00000-0x7ae00000] (64MB) mapped at [ffffffc076e00000-ffffffc07adfffff]
[    0.000000] Memory: 1932508K/2064384K available (6308K kernel code, 455K rwdata, 2560K rodata, 6888K init, 279K bss, 115492K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vmalloc : 0xffffff8000000000 - 0xffffffbdffff0000   (   247 GB)
[    0.000000]     vmemmap : 0xffffffbe00000000 - 0xffffffbfc0000000   (     7 GB maximum)
[    0.000000]               0xffffffbe00000000 - 0xffffffbe01b90000   (    27 MB actual)
[    0.000000]     fixed   : 0xffffffbffabfd000 - 0xffffffbffac00000   (    12 KB)
[    0.000000]     PCI I/O : 0xffffffbffae00000 - 0xffffffbffbe00000   (    16 MB)
[    0.000000]     modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
[    0.000000]     memory  : 0xffffffc000000000 - 0xffffffc07e000000   (  2016 MB)
[    0.000000]       .init : 0xffffffc00092a000 - 0xffffffc000fe4000   (  6888 KB)
[    0.000000]       .text : 0xffffffc000080000 - 0xffffffc000929934   (  8871 KB)
[    0.000000]       .data : 0xffffffc000fed000 - 0xffffffc00105ecd0   (   456 KB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Additional per-CPU info printed with stalls.
[    0.000000]     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff8000002000, parent irq: 89)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff8000008000, parent irq: 61)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff800000aa00, parent irq: 62)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff800000c640, parent irq: 91)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff800000e200, parent irq: 57)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff8000010500, parent irq: 95)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff8000012400, parent irq: 96)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff8000014540, parent irq: 93)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff8000016440, parent irq: 94)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xffffff8000018480, parent irq: 98)
[    0.000000] Architected cp15 timer(s) running at 27.00MHz (phys).
[    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
[    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
[    0.000370] Console: colour dummy device 80x25
[    0.000827] console [tty0] enabled
[    0.000846] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
[    0.000866] pid_max: default: 32768 minimum: 301
[    0.001002] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.001015] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.001611] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[    0.014876] CPU1: Booted secondary processor
[    0.014882] Detected VIPT I-cache on CPU1
[    0.014956] Brought up 2 CPUs
[    0.014987] SMP: Total of 2 processors activated.
[    0.014997] CPU: All CPU(s) started at EL2
[    0.015016] alternatives: patching kernel code
[    0.015319] devtmpfs: initialized
[    0.022331] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.022960] atomic64_test: passed
[    0.023685] NET: Registered protocol family 16
[    0.029223] cpuidle: using governor ladder
[    0.035225] cpuidle: using governor menu
[    0.035249] vdso: 2 pages (1 code @ ffffffc000ff5000, 1 data @ ffffffc000ff4000)
[    0.035291] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.035750] DMA: preallocated 256 KiB pool for atomic allocations
[    0.036083] Broadcom Brahma-B53 read-ahead cache at: 0xffffff80000e4478
[    0.051305] brcmstb-gpio f040a400.gpio: Registered 3 banks (GPIO(s): 0-95)
[    0.051481] brcmstb-gpio f04174c0.gpio: Registered 2 banks (GPIO(s): 96-159)
[    0.051914] SCSI subsystem initialized
[    0.052893] usbcore: registered new interface driver usbfs
[    0.052937] usbcore: registered new interface driver hub
[    0.052973] usbcore: registered new device driver usb
[    0.053034] Linux video capture interface: v2.00
[    0.053087] pps_core: LinuxPPS API ver. 1 registered
[    0.053097] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.053126] PTP clock support registered
[    0.053263] Advanced Linux Sound Architecture Driver Initialized.
[    0.053879] Switched to clocksource arch_sys_counter
[    0.058222] thermal thermal_zone0: failed to read out thermal zone (-22)
[    0.058341] NET: Registered protocol family 2
[    0.058636] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.058756] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.058990] TCP: Hash tables configured (established 16384 bind 16384)
[    0.059060] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.059102] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.059255] NET: Registered protocol family 1
[    0.059463] RPC: Registered named UNIX socket transport module.
[    0.059475] RPC: Registered udp transport module.
[    0.059484] RPC: Registered tcp transport module.
[    0.059493] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.247658] hw perfevents: Failed to parse /pmu/interrupt-affinity[0]
[    0.248389] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.249277] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.249451] NFS: Registering the id_resolver key type
[    0.249480] Key type id_resolver registered
[    0.249489] Key type id_legacy registered
[    0.249507] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.249539] jffs2: version 2.2. (NAND) В© 2001-2006 Red Hat, Inc.
[    0.249602] fuse init (API version 7.23)
[    0.255379] io scheduler noop registered
[    0.255442] io scheduler cfq registered (default)
[    0.255723] brcm-gisb-arb f0400000.gisb-arb: registered mem: ffffff800016a000, irqs: 2, 4
[    0.256334] brcmstb-sata-phy f0b10100.sata_phy: registered 1 port(s)
[    0.256685] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
[    0.256748] brcm-pci f0460000.pcie: no identity map; PCI drivers may fail
[    0.356892] brcm-pci f0460000.pcie: down
[    0.358261] brcmstb_memc f1102000.memc-ddr: registered
[    0.358449] brcm-waketimer f0417680.waketimer: registered, with irq 5
[    0.387216] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.388680] f040c000.serial: ttyS0 at MMIO 0xf040c000 (irq = 100, base_baud = 5062500) is a 16550A
[    1.110130] console [ttyS0] enabled
[    1.114238] f040d000.serial: ttyS1 at MMIO 0xf040d000 (irq = 101, base_baud = 5062500) is a 16550A
[    1.123698] f040e000.serial: ttyS2 at MMIO 0xf040e000 (irq = 102, base_baud = 5062500) is a 16550A
[    1.133341] [drm] Initialized drm 1.1.0 20060810
[    1.141994] brd: module loaded
[    1.147215] loop: module loaded
[    1.151189] brcm-ahci f0b12000.sata: controller can do ALPM, turning on CAP_ALPM
[    1.158624] brcm-ahci f0b12000.sata: masking port_map 0x1 -> 0x1
[    1.164665] brcm-ahci f0b12000.sata: SSS flag set, parallel bus scan disabled
[    1.181865] brcm-ahci f0b12000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
[    1.190854] brcm-ahci f0b12000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
[    1.199258] scsi host0: brcm-ahci
[    1.202729] ata1: SATA max UDMA/133 mmio [mem 0xf0b12000-0xf0b1299b] port 0x100 irq 87
[    1.210676] brcm-ahci f0b12000.sata: Broadcom AHCI SATA3 registered
[    1.218224] libphy: Fixed MDIO Bus: probed
[    1.222908] bcmgenet f0480000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.228794] bcmgenet f0480000.ethernet: failed to get enet-mux clock
[    1.247851] libphy: bcmgenet MII bus: probed
[    1.273400] Broadcom BCM7260 f0480000.etherne:01: failed to request GPHY clock
[    1.281469] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.287328] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    1.293304] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.300774] usbcore: registered new interface driver pegasus
[    1.306483] usbcore: registered new interface driver asix
[    1.311921] usbcore: registered new interface driver ax88179_178a
[    1.315864] ata1: SATA down (SStatus 0 SControl 300)
[    1.323465] usbcore: registered new interface driver cdc_ether
[    1.329355] usbcore: registered new interface driver cdc_ncm
[    1.335185] xhci-brcm: xHCI BRCM driver
[    1.339196] ehci-brcm: EHCI BRCM driver
[    1.358014] ehci-brcm f0b00300.ehci_v2: EHCI Host Controller
[    1.363801] ehci-brcm f0b00300.ehci_v2: new USB bus registered, assigned bus number 1
[    1.381807] ehci-brcm f0b00300.ehci_v2: irq 120, io mem 0xf0b00300
[    1.393857] ehci-brcm f0b00300.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.400426] hub 1-0:1.0: USB hub found
[    1.404207] hub 1-0:1.0: 1 port detected
[    1.408412] ehci-brcm f0b00500.ehci_v2: EHCI Host Controller
[    1.414176] ehci-brcm f0b00500.ehci_v2: new USB bus registered, assigned bus number 2
[    1.432137] ehci-brcm f0b00500.ehci_v2: irq 123, io mem 0xf0b00500
[    1.443857] ehci-brcm f0b00500.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.450371] hub 2-0:1.0: USB hub found
[    1.454147] hub 2-0:1.0: 1 port detected
[    1.458380] ohci-brcm: OHCI BRCM driver
[    1.462372] ohci-brcm f0b00400.ohci_v2: BRCM OHCI controller
[    1.468149] ohci-brcm f0b00400.ohci_v2: new USB bus registered, assigned bus number 3
[    1.476087] ohci-brcm f0b00400.ohci_v2: irq 121, io mem 0xf0b00400
[    1.537186] hub 3-0:1.0: USB hub found
[    1.540968] hub 3-0:1.0: 1 port detected
[    1.545122] ohci-brcm f0b00600.ohci_v2: BRCM OHCI controller
[    1.550902] ohci-brcm f0b00600.ohci_v2: new USB bus registered, assigned bus number 4
[    1.559407] ohci-brcm f0b00600.ohci_v2: irq 124, io mem 0xf0b00600
[    1.620179] hub 4-0:1.0: USB hub found
[    1.623958] hub 4-0:1.0: 1 port detected
[    1.628182] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.634748] ehci-pci: EHCI PCI platform driver
[    1.639265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.645475] ohci-pci: OHCI PCI platform driver
[    1.650067] usbcore: registered new interface driver usb-storage
[    1.656308] i2c /dev entries driver
[    1.660044] gspca_main: v2.14.0 registered
[    1.664432] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
[    1.709412] brcmstb-avs-cpufreq f04c4000.avs-cpu-data-mem: registered
[    1.716104] sdhci: Secure Digital Host Controller Interface driver
[    1.722302] sdhci: Copyright(c) Pierre Ossman
[    1.726677] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.733843] sdhci-brcmstb f0200200.sdhci: No vmmc regulator found
[    1.739965] sdhci-brcmstb f0200200.sdhci: No vqmmc regulator found
[    1.776858] mmc0: SDHCI controller on f0200200.sdhci [f0200200.sdhci] using ADMA
[    1.784521] usbcore: registered new interface driver usbhid
[    1.792119] usbhid: USB HID core driver
[    1.796044] usb 1-1: new high-speed USB device number 2 using ehci-brcm
[    1.796464] NET: Registered protocol family 17
[    1.796496] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.796675] Key type dns_resolver registered
[    1.805256] ALSA device list:
[    1.805258]   No soundcards found.
[    1.835011] Freeing unused kernel memory: 6888K (ffffffc00092a000 - ffffffc000fe4000)
[    1.842881] Freeing alternatives memory: 24K (ffffffc000fe4000 - ffffffc000fea000)

starting pid 1176, tty '': '/etc/init.d/rcS'
Mounting virtual filesystems
[    1.888650] mmc0: MAN_BKOPS_EN bit is not set
Switching to conservative governor
* WARNING: THIS STB CONTAINS GPLv3 SOFTWARE
* GPLv3 programs mu[    1.903576] mmc0: new high speed MMC card at address 0001
st be removed in order to enable security.
* See: http://www.gn[    1.913956] mmcblk0: mmc0:0001 4FTE4R 3.64 GiB
u.org/licenses/gpl-faq.html#Tivo[    1.920958] mmcblk0boot0: mmc0:0001 4FTE4R partition 1 4.00 MiB
ization
Configuring eth0 interf[    1.929428] mmcblk0boot1: mmc0:0001 4FTE4R partition 2 4.00 MiB
ace
[    1.938130] mmcblk0rpmb: mmc0:0001 4FTE4R partition 3 512 KiB
[    1.946800]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    1.958600] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.996948] f0480000.etherne:01: Broadcom BCM7260 PHY revision: 0x01
[    2.007966] scsi host1: usb-storage 1-1:1.0
[    2.037074] bcmgenet f0480000.ethernet: configuring instance for internal PHY
Configuring lo interface
Starting network services

starting pid 1284, tty '': '/bin/cttyhack /bin/sh -l'
# [    3.323070] scsi 1:0:0:0: Direct-Access     General  USB Flash Disk   1100 PQ: 0 ANSI: 4
[    3.331695] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    3.338573] sd 1:0:0:0: [sda] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB)
[    3.348361] sd 1:0:0:0: [sda] Write Protect is off
[    3.361518] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.390160]  sda: sda1
[    3.397459] sd 1:0:0:0: [sda] Attached SCSI removable disk
[    3.468638] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    3.494274] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
[    3.515569] EXT4-fs warning (device mmcblk0p7): ext4_clear_journal_err:4736: Filesystem error recorded from previous mount: IO failure
[    3.527696] EXT4-fs warning (device mmcblk0p7): ext4_clear_journal_err:4737: Marking fs in need of filesystem check.
[    3.538721] EXT4-fs (mmcblk0p7): warning: mounting fs with errors, running e2fsck is recommended
[    3.547892] EXT4-fs (mmcblk0p7): recovery complete
[    3.552917] EXT4-fs (mmcblk0p7): mounted filesystem with journalled data mode. Opts: data=journal
[    3.575485] EXT4-fs error (device mmcblk0p7): ext4_mb_generate_buddy:757: group 1, block bitmap and bg descriptor inconsistent: 27440 vs 27442 free clusters
[    3.589558] Aborting journal on device mmcblk0p7-8.
[    3.595053] EXT4-fs (mmcblk0p7): Remounting filesystem read-only
[    3.601088] EXT4-fs error (device mmcblk0p7) in ext4_free_blocks:4873: Journal has aborted
[    3.609582] EXT4-fs error (device mmcblk0p7) in ext4_ext_remove_space:3042: IO failure
[    3.617734] EXT4-fs error (device mmcblk0p7) in ext4_ext_truncate:4654: Journal has aborted
[    3.626308] EXT4-fs error (device mmcblk0p7) in ext4_reserve_inode_write:4980: Journal has aborted
[    3.635496] EXT4-fs error (device mmcblk0p7) in ext4_truncate:3808: Journal has aborted
[    3.643722] EXT4-fs error (device mmcblk0p7) in ext4_reserve_inode_write:4980: Journal has aborted
[    3.652911] EXT4-fs error (device mmcblk0p7) in ext4_orphan_del:2987: Journal has aborted
[    3.661311] EXT4-fs error (device mmcblk0p7) in ext4_reserve_inode_write:4980: Journal has aborted
[    4.041959] bcmgenet f0480000.ethernet eth0: Link is Down
[    4.245444] EXT4-fs error (device mmcblk0p7): ext4_put_super:789: Couldn't clean up the journal
[   57.072197] random: nonblocking pool is initialized

-----------------------------------------------
Date: 02.04.2024 - 16:33:27
End log file
[/spoiler]
Прошу помочь с анализом этих данных

[Ednaz]

Нажаль немає файлів відновлення на цей супутниковий приймач. Спробуйте встановити оригінальний імідж http://code.vuplus.com/index.php?action=image&image=30&model=vuzero4k
Відключіть все що під'єднано до приймача, окрім Flash накопичувача.
У Вас не може відформатувати розділ у Nand Flash

[Andrey3885]

Ednaz, Дякую Вам за пораду, нажаль не можу отримати доступ до оригінального іміджа за вказаним посиланням. Хочу спробувати утиліту e2fsck, підскажіть чи може вона допомогти?

[Serjoga]

нажаль не можу отримати доступ до оригінального іміджа за вказаним посиланням

Попробуйте браузер сменить

[Andrey3885]

Вибачаюсь, доступ вже є. Коли знімав цей лог використовував саме оригінальний образ vuplus-image-vuzero4k-20230613154111_usb.zip. Нажаль результату немає 

[berimor18]

Вибачаюсь, доступ вже є. Коли знімав цей лог використовував саме оригінальний образ vuplus-image-vuzero4k-20230613154111_usb.zip. Нажаль результату немає 

рецепт - сначала устанавливаеш имидж SatDreamGR а потом опенблекхол а далее какой хочеш.

[berimor18]

до выше сказаного - имидж только на питоне2 устанавливаеш

[Andrey3885]

рецепт - сначала устанавливаеш имидж SatDreamGR а потом опенблекхол а далее какой хочеш.

до выше сказаного - имидж только на питоне2 устанавливаеш

Попробую и этот способ, о результате отпишусь. Подскажите, где скачать SatDreamGR (PY2), а то смотрел, найти не могу...

[sety]

Очень сомневаюсь, но все же, имидж тут
[spoiler]https://sgcpm.com/satdreamgr-images-8/vu/vuzero4k/[/spoiler]

[Andrey3885]

Пробовал установить SatDreamGR, индикатор плавно мигает 15-20сек и начинает мигать прерывисто. Выключаю, вынимаю флешку, включаю питание - запускается старый имидж 

[sety]

запускается старый имидж

а этот старый имидж- он рабочий? Если да попробуйте его обновить или прошить онлайн в меню должны быть эти пункты

[Ednaz]

Вважаю, що потрібно шукати файл bolt_auto.bin для Zero4k. В мене нажаль немає і Marusys взагалі прибрав доступ до архіву VU Plus.

[Ednaz]

sety, після онлайн оновлення взагалі може імідж падати в crash. І тоді наврядчи, що з ним можливо буде зробити. Схоже, що є проблема з NAND Flash.