Обсуждение VU+Zero4k

Автор Ednaz, 19 Вересень 2017, 17:58:15

Попередня тема - Наступна тема

0 Користувачі і 4 Гостей дивляться цю тему.

Light

Ну что за напасть  :(
Драйверы ставятся нормально, перегружаю, выключаю, меняю свисток, включаю и опять только Лан
Vu+ Zero 4K
4,8E, 9E, 13E, 31,5E, 36E, 75E, 80E (Телекарта), 90Е

Марчелла

Samsung QE55Q60A 4K UHD & LG 55UJ630V 4K UHD > Zgemma H9 Combo/Twin 4K UHD & Zgemma H10 Combo 4K UHD & Zgemma H11 S 4K UHD & Formuler Z10 Pro MAX IPTV UHD

Light

Spoiler
openpli 7.3-release vuzero4k

vuzero4k login: root
root@vuzero4k:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.1.20-1.9 (oe-user@oe-host) (gcc version 6.3.0 (GC                                 C) ) #1 SMP Tue Jul 6 10:32:03 UTC 2021
[    0.000000] CPU: ARMv7 Processor [420f1000] revision 0 (ARMv7), cr=30c5383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio                                 n cache
[    0.000000] Machine model: BCM972604USFF
[    0.000000] moving dtb from 0x0000000007618000 to 0x00000000008cd5d0
[    0.000000] bmem: Reserved 699 MiB at 0x0000000052500000
[    0.000000] cma: Reserved 16 MiB at 0x0000000051400000
[    0.000000] Forcing write-allocate cache policy for SMP
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 516096
[    0.000000]   DMA zone: 512 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 65536 pages, LIFO batch:15
[    0.000000]   HighMem zone: 450560 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] PERCPU: Embedded 12 pages/cpu @cefb9000 s16844 r8192 d24116 u4915                                 2
[    0.000000] pcpu-alloc: s16844 r8192 d24116 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag                                 es: 515584
[    0.000000] Kernel command line: root=/dev/mmcblk0p7 rootfstype=ext4 rootflag                                 s=data=journal rootwait rw coherent_pool=2M rw bmem=699m@1317m
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 1306508K/2064384K available (6111K kernel code, 310K rwda                                 ta, 2044K rodata, 304K init, 197K bss, 741492K reserved, 16384K cma-reserved, 10                                 70076K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07ff280   (8157 kB)
[    0.000000]       .init : 0xc0800000 - 0xc084c000   ( 304 kB)
[    0.000000]       .data : 0xc084c000 - 0xc0899bb0   ( 311 kB)
[    0.000000]        .bss : 0xc089c000 - 0xc08cd5d0   ( 198 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0802000, parent irq:                                  89)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0808000, parent irq:                                  61)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080aa00, parent irq:                                  62)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080c640, parent irq:                                  91)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080e200, parent irq:                                  57)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0810500, parent irq:                                  95)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0812400, parent irq:                                  96)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0814540, parent irq:                                  93)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0816440, parent irq:                                  94)
[    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0818480, parent irq:                                  98)
[    0.000000] MCP: Enabling write pairing
[    0.000000] Architected cp15 timer(s) running at 27.00MHz (phys).
[    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles:                                  0x63a1e71a3, max_idle_ns: 440795203123 ns
[    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 43980                                 46511093ns
[    0.000010] Switching to timer-based delay loop, resolution 37ns
[    0.000372] Console: colour dummy device 80x30
[    0.000390] Calibrating delay loop (skipped), value calculated using timer fr                                 equency.. 54.00 BogoMIPS (lpj=27000)
[    0.000398] pid_max: default: 32768 minimum: 301
[    0.000488] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000493] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000847] CPU: Testing write buffer coherency: ok
[    0.001047] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.001081] Setting up static identity map for 0x8480 - 0x84d8
[    0.014831] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.014877] Brought up 2 CPUs
[    0.014887] SMP: Total of 2 processors activated (108.00 BogoMIPS).
[    0.014890] CPU: All CPU(s) started in HYP mode.
[    0.014893] CPU: Virtualization extensions available.
[    0.015160] devtmpfs: initialized
[    0.022890] VFP support v0.3: implementor 42 architecture 3 part 10 variant 0                                  rev 0
[    0.023075] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max                                 _idle_ns: 1911260446275000 ns
[    0.024105] NET: Registered protocol family 16
[    0.025251] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.029935] cpuidle: using governor ladder
[    0.035943] cpuidle: using governor menu
[    0.041246] No ATAGs?
[    0.041280] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint                                  registers.
[    0.041286] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.041559] Broadcom Brahma-B15 readahead cache at: 0xd0aaa478
[    0.052193] brcmstb-gpio f040a400.gpio: Registered 3 banks (GPIO(s): 0-95)
[    0.052364] brcmstb-gpio f04174c0.gpio: Registered 2 banks (GPIO(s): 96-159)
[    0.052681] SCSI subsystem initialized
[    0.053429] libata version 3.00 loaded.
[    0.053598] usbcore: registered new interface driver usbfs
[    0.053634] usbcore: registered new interface driver hub
[    0.053663] usbcore: registered new device driver usb
[    0.053717] Linux video capture interface: v2.00
[    0.053772] pps_core: LinuxPPS API ver. 1 registered
[    0.053776] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome                                 tti <giometti@linux.it>
[    0.053791] PTP clock support registered
[    0.054163] Advanced Linux Sound Architecture Driver Initialized.
[    0.054957] Switched to clocksource arch_sys_counter
[    0.055124] FS-Cache: Loaded
[    0.060212] thermal thermal_zone0: failed to read out thermal zone (-22)
[    0.060311] NET: Registered protocol family 2
[    0.060643] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    0.060661] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[    0.060683] TCP: Hash tables configured (established 2048 bind 2048)
[    0.060721] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.060733] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.060813] NET: Registered protocol family 1
[    0.061025] RPC: Registered named UNIX socket transport module.
[    0.061028] RPC: Registered udp transport module.
[    0.061031] RPC: Registered tcp transport module.
[    0.061034] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.061049] PCI: CLS 0 bytes, default 64
[    0.061415] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
[    0.061437] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counte                                 rs available
[    0.062234] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.063147] NFS: Registering the id_resolver key type
[    0.063168] Key type id_resolver registered
[    0.063171] Key type id_legacy registered
[    0.063182] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.063188] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.063414] fuse init (API version 7.23)
[    0.064232] bounce: pool size: 64 pages
[    0.064266] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2                                 52)
[    0.064275] io scheduler noop registered
[    0.064281] io scheduler deadline registered
[    0.064299] io scheduler cfq registered (default)
[    0.064543] brcm-gisb-arb f0400000.gisb-arb: registered mem: d0aca000, irqs:                                  261, 262
[    0.065111] brcmstb-sata-phy f0b10100.sata_phy: registered 1 port(s)
[    0.065460] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
[    0.065514] brcm-pci f0460000.pcie: no identity map; PCI drivers may fail
[    0.165644] brcm-pci f0460000.pcie: link down
[    0.166950] brcmstb_memc f1102000.memc-ddr: registered
[    0.167147] brcm-waketimer f0417680.waketimer: registered, with irq 264
[    0.167323] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.168248] console [ttyS0] disabled
[    0.168271] f040c000.serial: ttyS0 at MMIO 0xf040c000 (irq = 100, base_baud =                                  5062500) is a 16550A
[    0.909882] console [ttyS0] enabled
[    0.913697] f040d000.serial: ttyS1 at MMIO 0xf040d000 (irq = 101, base_baud =                                  5062500) is a 16550A
[    0.922945] f040e000.serial: ttyS2 at MMIO 0xf040e000 (irq = 102, base_baud =                                  5062500) is a 16550A
[    0.934969] loop: module loaded
[    0.938814] brcm-ahci f0b12000.sata: controller can do ALPM, turning on CAP_A                                 LPM
[    0.946229] brcm-ahci f0b12000.sata: masking port_map 0x1 -> 0x1
[    0.952263] brcm-ahci f0b12000.sata: SSS flag set, parallel bus scan disabled
[    0.969974] brcm-ahci f0b12000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0                                 x1 impl platform mode
[    0.978955] brcm-ahci f0b12000.sata: flags: 64bit ncq sntf stag pm clo pmp sl                                 um part
[    0.987463] scsi host0: brcm-ahci
[    0.990924] ata1: SATA max UDMA/133 mmio [mem 0xf0b12000-0xf0b1299b] port 0x1                                 00 irq 87
[    0.998859] brcm-ahci f0b12000.sata: Broadcom AHCI SATA3 registered
[    1.006238] libphy: Fixed MDIO Bus: probed
[    1.010788] bcmgenet f0480000.ethernet: GENET 5.0 EPHY: 0x0000
[    1.016672] bcmgenet f0480000.ethernet: failed to get enet-mux clock
[    1.035958] libphy: bcmgenet MII bus: probed
[    1.060108] Broadcom BCM7260 f0480000.etherne:01: failed to request GPHY cloc                                 k
[    1.067945] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.073789] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    1.079891] xhci-brcm: xHCI BRCM driver
[    1.083890] ehci-brcm: EHCI BRCM driver
[    1.102078] ehci-brcm f0b00300.ehci_v2: EHCI Host Controller
[    1.107845] ehci-brcm f0b00300.ehci_v2: new USB bus registered, assigned bus                                  number 1
[    1.115971] ata1: SATA link down (SStatus 0 SControl 300)
[    1.125824] ehci-brcm f0b00300.ehci_v2: irq 120, io mem 0xf0b00300
[    1.137965] ehci-brcm f0b00300.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.144538] hub 1-0:1.0: USB hub found
[    1.148310] hub 1-0:1.0: 1 port detected
[    1.152498] ehci-brcm f0b00500.ehci_v2: EHCI Host Controller
[    1.158255] ehci-brcm f0b00500.ehci_v2: new USB bus registered, assigned bus                                  number 2
[    1.176206] ehci-brcm f0b00500.ehci_v2: irq 123, io mem 0xf0b00500
[    1.187964] ehci-brcm f0b00500.ehci_v2: USB 2.0 started, EHCI 1.00
[    1.194500] hub 2-0:1.0: USB hub found
[    1.198270] hub 2-0:1.0: 1 port detected
[    1.202499] ohci-brcm: OHCI BRCM driver
[    1.206457] ohci-brcm f0b00400.ohci_v2: BRCM OHCI controller
[    1.212211] ohci-brcm f0b00400.ohci_v2: new USB bus registered, assigned bus                                  number 3
[    1.220129] ohci-brcm f0b00400.ohci_v2: irq 121, io mem 0xf0b00400
[    1.281316] hub 3-0:1.0: USB hub found
[    1.285088] hub 3-0:1.0: 1 port detected
[    1.289242] ohci-brcm f0b00600.ohci_v2: BRCM OHCI controller
[    1.295012] ohci-brcm f0b00600.ohci_v2: new USB bus registered, assigned bus                                  number 4
[    1.303459] ohci-brcm f0b00600.ohci_v2: irq 124, io mem 0xf0b00600
[    1.364311] hub 4-0:1.0: USB hub found
[    1.368087] hub 4-0:1.0: 1 port detected
[    1.372330] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.378880] ehci-pci: EHCI PCI platform driver
[    1.383392] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.389591] ohci-pci: OHCI PCI platform driver
[    1.394166] usbcore: registered new interface driver usb-storage
[    1.400328] mousedev: PS/2 mouse device common for all mice
[    1.406320] i2c /dev entries driver
[    1.410496] IR NEC protocol handler initialized
[    1.415040] IR RC5(x/sz) protocol handler initialized
[    1.420105] IR RC6 protocol handler initialized
[    1.424647] IR JVC protocol handler initialized
[    1.429189] IR Sony protocol handler initialized
[    1.433819] IR SANYO protocol handler initialized
[    1.438534] IR Sharp protocol handler initialized
[    1.443250] IR MCE Keyboard/mouse protocol handler initialized
[    1.449096] IR XMP protocol handler initialized
[    1.453942] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor d                                 river
[    1.461786] usb 1-1: new high-speed USB device number 2 using ehci-brcm
[    1.499047] brcmstb-avs-cpufreq f04c4000.avs-cpu-data-mem: registered
[    1.505735] sdhci: Secure Digital Host Controller Interface driver
[    1.511928] sdhci: Copyright(c) Pierre Ossman
[    1.516298] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.523183] sdhci-brcmstb f0200200.sdhci: No vmmc regulator found
[    1.529290] sdhci-brcmstb f0200200.sdhci: No vqmmc regulator found
[    1.565964] mmc0: SDHCI controller on f0200200.sdhci [f0200200.sdhci] using A                                 DMA
[    1.575620] usbcore: registered new interface driver usbhid
[    1.581210] usbhid: USB HID core driver
[    1.588506] NET: Registered protocol family 17
[    1.593074] Key type dns_resolver registered
[    1.597495] Registering SWP/SWPB emulation handler
[    1.606610] ALSA device list:
[    1.609604]   No soundcards found.
[    1.614742] hub 1-1:1.0: USB hub found
[    1.619300] hub 1-1:1.0: 4 ports detected
[    1.630374] Waiting for root device /dev/mmcblk0p7...
[    1.664632] mmc0: MAN_BKOPS_EN bit is not set
[    1.675218] mmc0: new high speed MMC card at address 0001
[    1.680815] mmcblk0: mmc0:0001 4FTE4R 3.64 GiB
[    1.685403] mmcblk0boot0: mmc0:0001 4FTE4R partition 1 4.00 MiB
[    1.691375] mmcblk0boot1: mmc0:0001 4FTE4R partition 2 4.00 MiB
[    1.697344] mmcblk0rpmb: mmc0:0001 4FTE4R partition 3 512 KiB
[    1.705748]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    1.736548] EXT4-fs: Warning: mounting with data=journal disables delayed all                                 ocation and O_DIRECT support!
[    1.893972] usb 1-1.1: new high-speed USB device number 3 using ehci-brcm
[    1.900978] EXT4-fs (mmcblk0p7): warning: maximal mount count reached, runnin                                 g e2fsck is recommended
[    1.910672] EXT4-fs (mmcblk0p7): recovery complete
[    1.915684] EXT4-fs (mmcblk0p7): mounted filesystem with journalled data mode                                 . Opts: data=journal
[    1.924617] VFS: Mounted root (ext4 filesystem) on device 179:7.
[    1.931023] devtmpfs: mounted
[    1.934202] Freeing unused kernel memory: 304K (c0800000 - c084c000)
[    1.994270] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[    2.000807] scsi host1: usb-storage 1-1.1:1.0
[    2.078978] usb 1-1.4: new high-speed USB device number 4 using ehci-brcm
[    2.198504] EXT4-fs (mmcblk0p7): re-mounted. Opts: nodelalloc,data=journal
[    2.306999] usb 1-1.4: reset high-speed USB device number 4 using ehci-brcm
[    2.411919] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 d                                 etected
[    2.447914] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[    2.455330] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    2.456102] usbcore: registered new interface driver rt2800usb
[    2.646699] random: dd urandom read with 15 bits of entropy available
[    2.699118] procmk_init
[    2.707127] bcm_event: module license 'Proprietary' taints kernel.
[    2.713336] Disabling lock debugging due to kernel taint
[    2.912305] nexus.ko: virtual irq: enabled (267)
[    2.917026] nexus.ko: shared gpio banks: enabled
[    3.008061] usb-storage 1-1.1:1.0: Max LUN 17 is not valid, using 0 instead
[    3.018850] scsi 1:0:0:0: CD-ROM            RTK      Driver Storage   1.00 PQ                                 : 0 ANSI: 0 CCS
[    3.027667] scsi 1:0:0:0: Attached scsi generic sg0 type 5
[    3.056689] sr 1:0:0:0: [sr0] scsi3-mmc drive: 0x/0x caddy
[    3.062196] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.069145] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.988185] DVB: registering new adapter (_vuplus_zero4k_)
[    6.454708] bcm7252s: hotplug_callback():
[    6.454708] Hotplug - status.connected 1:0:1
[    6.461815] bcm7252s: hotplug_callback():
[    6.461815] Hotplug - connecting HDMI to display 0xe
[    6.669961] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
[    6.696909] [MPVR]: >> misc_pvr_init
[    6.703353] [VID]: 6bcm7335_video_init
[    6.710195] [AUD]: 6bcm7335_audio_init
[    6.714472] [AUD]: >> bcm_audio_capture_init
[    6.725475] qam=0, ofdm=0, satellite=1
[    6.744398] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)                                 ...
[    6.787344] input: dreambox advanced remote control (native) as /devices/virt                                 ual/input/input0
[    6.801273] [LCD]: registered
[    6.910064] [CI]: registered ci0
[    8.058268] [CI]: CI interface initialised
[    8.058268]
[    8.070039] [DFP]: registered dbox fp
[    8.076380] [SC]: registered sci0
[    8.221964] system_time_set wakeup mode get
[    8.285969] system_time_set wakeup mode get 0xc4
[    8.589484] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmwa                                 re file 'rt2870.bin'
[    8.600033] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detec                                 ted - version: 0.36
[    9.177046] random: nonblocking pool is initialized
[   10.106970] wlan0: authenticate with cc:be:59:f7:ef:a6
[   10.134306] wlan0: send auth to cc:be:59:f7:ef:a6 (try 1/3)
[   10.142440] wlan0: authenticated
[   10.146965] wlan0: associate with cc:be:59:f7:ef:a6 (try 1/3)
[   10.161930] wlan0: RX AssocResp from cc:be:59:f7:ef:a6 (capab=0x411 status=0                                  aid=3)
[   10.176427] wlan0: associated
[   11.146510] NET: Registered protocol family 10
[   11.273797] Bluetooth: Core ver 2.20
[   11.277451] NET: Registered protocol family 31
[   11.281917] Bluetooth: HCI device and connection manager initialized
[   11.288322] Bluetooth: HCI socket layer initialized
[   11.293244] Bluetooth: L2CAP socket layer initialized
[   11.298350] Bluetooth: SCO socket layer initialized
[   12.039324] [VID]: VIDEO_SET_STREAMTYPE 1
[   12.043631] [VID]: VIDEO_SELECT_SOURCE 1  0
[   12.048076] [VID]: VIDEO_PLAY 1  5 0
[   12.057148] [VID]: VIDEO_CONTINUE 1  1
[   12.061180] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
[   12.225095] [VID]: VIDEO_STOP 0  1
[   12.229412] [VID]: VIDEO_SELECT_SOURCE 0  0
[   15.342495] [AUD]: AUDIO_SET_MUTE 0
[   15.347182] [AUD]: AUDIO_SET_MIXER -847372656
[   15.351681] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[   15.357029] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
[   15.363696] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[   21.422529] [AUD]: AUDIO_SET_MUTE 1
[   21.654743] [AUD]: AUDIO_SET_MIXER -847372656
[   21.659236] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
[   21.664326] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[   21.671306] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
[   22.514177] FE tune
[   22.688707] [AUD]: AUDIO_SELECT_SOURCE 0
[   22.694201] [AUD]: AUDIO_SET_BYPASS_MODE 1
[   22.698409] [AUD]: downmix 0 state : 0
[   22.702345] [AUD]: AUDIO_PAUSE 3
[   22.705767] [AUD]: AUDIO_PLAY 3 decoder start : 0
[   22.711870] [VID]: VIDEO_SELECT_SOURCE 0  0
[   22.716153] [VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:1080
[   22.723052] [VID]: VIDEO_GET_SIZE aspect: 1 6
[   22.727609] [VID]: VIDEO_SET_STREAMTYPE 1
[   22.731781] [VID]: VIDEO_FREEZE 3  0
[   22.735524] [VID]: VIDEO_PLAY 3  5 2
[   22.746886] [VID]: VIDEO_SLOWMOTION 0    1
[   22.752505] [VID]: VIDEO_FAST_FORWARD 0    1 0
[   22.759863] [VID]: VIDEO_CONTINUE 3  1
[   22.766357] [AUD]: AUDIO_CONTINUE 3 1 aph=0xcea53680
[   22.772780] [AUD]: Mute : 1
[   22.776384] [AUD]: AUDIO_CHANNEL_SELECT 0
[   23.509479] [VID]: VIDEO_STOP 1  1
[   23.512928] [AUD]: AUDIO_STOP 0
[   23.520831] [AUD]: AUDIO_CONTINUE 3 0 aph=0x0
[   23.525202] [AUD]: AUDIO_CONTINUE aph=0 0 0
[   25.108217] bcm7252s: hotplug_callback():
[   25.108217] Hotplug - status.connected 0:1:0
[   25.813969] >>cid=1, sid=0 r=0 s=0
[   25.817465] ROLT
[   26.162704] bcm7252s: hotplug_callback():
[   26.162704] Hotplug - status.connected 1:0:2
[   26.302969] >>cid=1, sid=0 r=2 s=0
[   27.549982] >>cid=1, sid=0 r=2 s=0
[   27.858348] [AUD]: AUDIO_SET_MUTE 0
[   28.011452] FE tune
[   28.190628] [AUD]: AUDIO_SELECT_SOURCE 0
[   28.195947] [AUD]: AUDIO_SET_BYPASS_MODE 1
[   28.200509] [AUD]: downmix 0 state : 0
[   28.204334] [AUD]: AUDIO_PAUSE 3
[   28.207659] [AUD]: AUDIO_PLAY 3 decoder start : 0
[   28.213451] [VID]: VIDEO_SELECT_SOURCE 0  0
[   28.217847] [VID]: VIDEO_SET_STREAMTYPE 1
[   28.222047] [VID]: VIDEO_FREEZE 3  0
[   28.225637] [VID]: VIDEO_PLAY 3  5 2
[   28.237059] [VID]: VIDEO_SLOWMOTION 0    1
[   28.242285] [VID]: VIDEO_FAST_FORWARD 0    1 0
[   28.249526] [VID]: VIDEO_CONTINUE 3  1
[   28.256108] [AUD]: AUDIO_CONTINUE 3 1 aph=0xceb22d80
[   28.262947] [AUD]: Mute : 0
[   28.271924] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[   28.278014] [VID]: VIDEO_GET_SIZE aspect: 1 0
[   28.540979] >>cid=1, sid=0 r=2 s=0
[   29.569970] >>cid=1, sid=0 r=2 s=0
[   30.821968] >>cid=1, sid=0 r=2 s=0
[   31.790972] >>cid=1, sid=0 r=2 s=0
[   32.780978] >>cid=1, sid=0 r=2 s=0
[   33.780975] >>cid=1, sid=0 r=2 s=0
root@vuzero4k:~#
Vu+ Zero 4K
4,8E, 9E, 13E, 31,5E, 36E, 75E, 80E (Телекарта), 90Е

Light

Vu+ Zero 4K
4,8E, 9E, 13E, 31,5E, 36E, 75E, 80E (Телекарта), 90Е

Марчелла

Samsung QE55Q60A 4K UHD & LG 55UJ630V 4K UHD > Zgemma H9 Combo/Twin 4K UHD & Zgemma H10 Combo 4K UHD & Zgemma H11 S 4K UHD & Formuler Z10 Pro MAX IPTV UHD

Light

Цитата: Марчелла від 18 Травень 2023, 11:42:40возможно...
Не установилось ни с tmp ни с флешки  :-[

Vu+ Zero 4K
4,8E, 9E, 13E, 31,5E, 36E, 75E, 80E (Телекарта), 90Е

Марчелла

Light, так! закидываешь каждый пакет по отдельности в папку tmp
https://tvfaq.net/index.php/topic,103.msg50922.html#msg50922
https://tvfaq.net/index.php/topic,103.msg50940.html#msg50940

открываешь Putty и даёшь команду
opkg install /tmp/*.ipk

после, логи установки в студию.
Samsung QE55Q60A 4K UHD & LG 55UJ630V 4K UHD > Zgemma H9 Combo/Twin 4K UHD & Zgemma H10 Combo 4K UHD & Zgemma H11 S 4K UHD & Formuler Z10 Pro MAX IPTV UHD

Light

Извиняюсь за поздний ответ.

Сегодняшний файл, как и ранее, не установился (первые 2 скрина)


По этому файлу
https://tvfaq.net/index.php/topic,103.msg50922.html#msg50922

Скрин 3
Перегрузил, драйвер установлен, но свисток опять приемник не видит
Vu+ Zero 4K
4,8E, 9E, 13E, 31,5E, 36E, 75E, 80E (Телекарта), 90Е

Марчелла

Samsung QE55Q60A 4K UHD & LG 55UJ630V 4K UHD > Zgemma H9 Combo/Twin 4K UHD & Zgemma H10 Combo 4K UHD & Zgemma H11 S 4K UHD & Formuler Z10 Pro MAX IPTV UHD

Light

Сейчас 5ггц свисток отключен
Vu+ Zero 4K
4,8E, 9E, 13E, 31,5E, 36E, 75E, 80E (Телекарта), 90Е

Light

Vu+ Zero 4K
4,8E, 9E, 13E, 31,5E, 36E, 75E, 80E (Телекарта), 90Е

Марчелла

Light, давай так...

подкинь фид от ATV по пути etc/opkg что в прицепе, только свой сохрани...
перезагрузи бокс и дай опять вывод
opkg list | grep 8821
Samsung QE55Q60A 4K UHD & LG 55UJ630V 4K UHD > Zgemma H9 Combo/Twin 4K UHD & Zgemma H10 Combo 4K UHD & Zgemma H11 S 4K UHD & Formuler Z10 Pro MAX IPTV UHD

Light

Vu+ Zero 4K
4,8E, 9E, 13E, 31,5E, 36E, 75E, 80E (Телекарта), 90Е

Марчелла

странно что есть только 8821au а не cu...

дай эту команду и покаж выхлоп...
opkg update && opkg install kernel-module-8821au

далее вставь стик, перезагризи бокс с розетки или тумблером и даём
dmesg

лог сюда же.

Samsung QE55Q60A 4K UHD & LG 55UJ630V 4K UHD > Zgemma H9 Combo/Twin 4K UHD & Zgemma H10 Combo 4K UHD & Zgemma H11 S 4K UHD & Formuler Z10 Pro MAX IPTV UHD

Light

Цитата: Марчелла від 18 Травень 2023, 18:18:04лог сюда же.

Первая команда на скрине

Вторая после перезагрузки трумблером

Spoiler
openpli 7.3-release vuzero4k

vuzero4k login: root
root@vuzero4k:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.1.20-1.9 (oe-user@oe-host) (gcc version 6.3.0 (GC   C) ) #1 SMP Tue Jul 6 10:32:03 UTC 2021
[    0.000000] CPU: ARMv7 Processor [420f1000] revision 0 (ARMv7), cr=30c5383d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio   n cache
[    0.000000] Machine model: BCM972604USFF
[    0.000000] moving dtb from 0x0000000007618000 to 0x00000000008cd5d0
[    0.000000] bmem: Reserved 699 MiB at 0x0000000052500000
[    0.000000] cma: Reserved 16 MiB at 0x0000000051400000
[    0.000000] Forcing write-allocate cache policy for SMP
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 516096
[    0.000000]   DMA zone: 512 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 65536 pages, LIFO batch:15
[    0.000000]   HighMem zone: 450560 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] PERCPU: Embedded 12 pages/cpu @cefb9000 s16844 r8192 d24116 u4915   2
[    0.000000] pcpu-alloc: s16844 r8192 d24116 u49152 alloc=12*4096
[    0.000000] pcpu-alloc:
  • 0
  • 1
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pag   es: 515584
    [    0.000000] Kernel command line: root=/dev/mmcblk0p7 rootfstype=ext4 rootflag   s=data=journal rootwait rw coherent_pool=2M rw bmem=699m@1317m
    [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Memory: 1306508K/2064384K available (6111K kernel code, 310K rwda   ta, 2044K rodata, 304K init, 197K bss, 741492K reserved, 16384K cma-reserved, 10   70076K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc07ff280   (8157 kB)
    [    0.000000]       .init : 0xc0800000 - 0xc084c000   ( 304 kB)
    [    0.000000]       .data : 0xc084c000 - 0xc0899bb0   ( 311 kB)
    [    0.000000]        .bss : 0xc089c000 - 0xc08cd5d0   ( 198 kB)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0802000, parent irq:    89)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0808000, parent irq:    61)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080aa00, parent irq:    62)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080c640, parent irq:    91)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080e200, parent irq:    57)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0810500, parent irq:    95)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0812400, parent irq:    96)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0814540, parent irq:    93)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0816440, parent irq:    94)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0818480, parent irq:    98)
    [    0.000000] MCP: Enabling write pairing
    [    0.000000] Architected cp15 timer(s) running at 27.00MHz (phys).
    [    0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles:    0x63a1e71a3, max_idle_ns: 440795203123 ns
    [    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 43980   46511093ns
    [    0.000010] Switching to timer-based delay loop, resolution 37ns
    [    0.000370] Console: colour dummy device 80x30
    [    0.000388] Calibrating delay loop (skipped), value calculated using timer fr   equency.. 54.00 BogoMIPS (lpj=27000)
    [    0.000396] pid_max: default: 32768 minimum: 301
    [    0.000487] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000492] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000844] CPU: Testing write buffer coherency: ok
    [    0.001047] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.001081] Setting up static identity map for 0x8480 - 0x84d8
    [    0.014843] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.014889] Brought up 2 CPUs
    [    0.014899] SMP: Total of 2 processors activated (108.00 BogoMIPS).
    [    0.014903] CPU: All CPU(s) started in HYP mode.
    [    0.014905] CPU: Virtualization extensions available.
    [    0.015176] devtmpfs: initialized
    [    0.022916] VFP support v0.3: implementor 42 architecture 3 part 10 variant 0    rev 0
    [    0.023104] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max   _idle_ns: 1911260446275000 ns
    [    0.024135] NET: Registered protocol family 16
    [    0.025280] DMA: preallocated 2048 KiB pool for atomic coherent allocations
    [    0.029942] cpuidle: using governor ladder
    [    0.035951] cpuidle: using governor menu
    [    0.041260] No ATAGs?
    [    0.041294] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint    registers.
    [    0.041301] hw-breakpoint: maximum watchpoint size is 8 bytes.
    [    0.041583] Broadcom Brahma-B15 readahead cache at: 0xd0aaa478
    [    0.052097] brcmstb-gpio f040a400.gpio: Registered 3 banks (GPIO(s): 0-95)
    [    0.052273] brcmstb-gpio f04174c0.gpio: Registered 2 banks (GPIO(s): 96-159)
    [    0.052597] SCSI subsystem initialized
    [    0.053216] libata version 3.00 loaded.
    [    0.053382] usbcore: registered new interface driver usbfs
    [    0.053419] usbcore: registered new interface driver hub
    [    0.053447] usbcore: registered new device driver usb
    [    0.053500] Linux video capture interface: v2.00
    [    0.053555] pps_core: LinuxPPS API ver. 1 registered
    [    0.053559] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome   tti <giometti@linux.it>
    [    0.053574] PTP clock support registered
    [    0.053926] Advanced Linux Sound Architecture Driver Initialized.
    [    0.054749] Switched to clocksource arch_sys_counter
    [    0.054904] FS-Cache: Loaded
    [    0.060731] thermal thermal_zone0: failed to read out thermal zone (-22)
    [    0.060870] NET: Registered protocol family 2
    [    0.061247] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.061264] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    [    0.061286] TCP: Hash tables configured (established 2048 bind 2048)
    [    0.061325] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.061338] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.061447] NET: Registered protocol family 1
    [    0.061638] RPC: Registered named UNIX socket transport module.
    [    0.061641] RPC: Registered udp transport module.
    [    0.061644] RPC: Registered tcp transport module.
    [    0.061647] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.061660] PCI: CLS 0 bytes, default 64
    [    0.062032] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
    [    0.062054] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counte   rs available
    [    0.062827] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.063689] NFS: Registering the id_resolver key type
    [    0.063711] Key type id_resolver registered
    [    0.063715] Key type id_legacy registered
    [    0.063726] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    0.063732] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [    0.064169] fuse init (API version 7.23)
    [    0.064780] bounce: pool size: 64 pages
    [    0.064809] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2   52)
    [    0.064817] io scheduler noop registered
    [    0.064823] io scheduler deadline registered
    [    0.064838] io scheduler cfq registered (default)
    [    0.065084] brcm-gisb-arb f0400000.gisb-arb: registered mem: d0aca000, irqs:    261, 262
    [    0.065633] brcmstb-sata-phy f0b10100.sata_phy: registered 1 port(s)
    [    0.065990] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
    [    0.066043] brcm-pci f0460000.pcie: no identity map; PCI drivers may fail
    [    0.166173] brcm-pci f0460000.pcie: link down
    [    0.167498] brcmstb_memc f1102000.memc-ddr: registered
    [    0.167683] brcm-waketimer f0417680.waketimer: registered, with irq 264
    [    0.167861] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.168784] console [ttyS0] disabled
    [    0.168809] f040c000.serial: ttyS0 at MMIO 0xf040c000 (irq = 100, base_baud =    5062500) is a 16550A
    [    0.910515] console [ttyS0] enabled
    [    0.914332] f040d000.serial: ttyS1 at MMIO 0xf040d000 (irq = 101, base_baud =    5062500) is a 16550A
    [    0.923582] f040e000.serial: ttyS2 at MMIO 0xf040e000 (irq = 102, base_baud =    5062500) is a 16550A
    [    0.935574] loop: module loaded
    [    0.939409] brcm-ahci f0b12000.sata: controller can do ALPM, turning on CAP_A   LPM
    [    0.946826] brcm-ahci f0b12000.sata: masking port_map 0x1 -> 0x1
    [    0.952856] brcm-ahci f0b12000.sata: SSS flag set, parallel bus scan disabled
    [    0.970766] brcm-ahci f0b12000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0   x1 impl platform mode
    [    0.979748] brcm-ahci f0b12000.sata: flags: 64bit ncq sntf stag pm clo pmp sl   um part
    [    0.988259] scsi host0: brcm-ahci
    [    0.991722] ata1: SATA max UDMA/133 mmio [mem 0xf0b12000-0xf0b1299b] port 0x1   00 irq 87
    [    0.999657] brcm-ahci f0b12000.sata: Broadcom AHCI SATA3 registered
    [    1.007026] libphy: Fixed MDIO Bus: probed
    [    1.011508] bcmgenet f0480000.ethernet: GENET 5.0 EPHY: 0x0000
    [    1.017403] bcmgenet f0480000.ethernet: failed to get enet-mux clock
    [    1.036749] libphy: bcmgenet MII bus: probed
    [    1.060901] Broadcom BCM7260 f0480000.etherne:01: failed to request GPHY cloc   k
    [    1.068761] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [    1.074604] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
    [    1.080702] xhci-brcm: xHCI BRCM driver
    [    1.084708] ehci-brcm: EHCI BRCM driver
    [    1.102876] ehci-brcm f0b00300.ehci_v2: EHCI Host Controller
    [    1.104765] ata1: SATA link down (SStatus 0 SControl 300)
    [    1.114054] ehci-brcm f0b00300.ehci_v2: new USB bus registered, assigned bus    number 1
    [    1.132033] ehci-brcm f0b00300.ehci_v2: irq 120, io mem 0xf0b00300
    [    1.143756] ehci-brcm f0b00300.ehci_v2: USB 2.0 started, EHCI 1.00
    [    1.150336] hub 1-0:1.0: USB hub found
    [    1.154108] hub 1-0:1.0: 1 port detected
    [    1.158296] ehci-brcm f0b00500.ehci_v2: EHCI Host Controller
    [    1.164045] ehci-brcm f0b00500.ehci_v2: new USB bus registered, assigned bus    number 2
    [    1.181995] ehci-brcm f0b00500.ehci_v2: irq 123, io mem 0xf0b00500
    [    1.193757] ehci-brcm f0b00500.ehci_v2: USB 2.0 started, EHCI 1.00
    [    1.200284] hub 2-0:1.0: USB hub found
    [    1.204053] hub 2-0:1.0: 1 port detected
    [    1.208281] ohci-brcm: OHCI BRCM driver
    [    1.212241] ohci-brcm f0b00400.ohci_v2: BRCM OHCI controller
    [    1.217996] ohci-brcm f0b00400.ohci_v2: new USB bus registered, assigned bus    number 3
    [    1.225917] ohci-brcm f0b00400.ohci_v2: irq 121, io mem 0xf0b00400
    [    1.287101] hub 3-0:1.0: USB hub found
    [    1.290875] hub 3-0:1.0: 1 port detected
    [    1.295031] ohci-brcm f0b00600.ohci_v2: BRCM OHCI controller
    [    1.300798] ohci-brcm f0b00600.ohci_v2: new USB bus registered, assigned bus    number 4
    [    1.309246] ohci-brcm f0b00600.ohci_v2: irq 124, io mem 0xf0b00600
    [    1.370097] hub 4-0:1.0: USB hub found
    [    1.373868] hub 4-0:1.0: 1 port detected
    [    1.378119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    1.384669] ehci-pci: EHCI PCI platform driver
    [    1.389181] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    1.395384] ohci-pci: OHCI PCI platform driver
    [    1.399961] usbcore: registered new interface driver usb-storage
    [    1.406127] mousedev: PS/2 mouse device common for all mice
    [    1.412155] i2c /dev entries driver
    [    1.416331] IR NEC protocol handler initialized
    [    1.420877] IR RC5(x/sz) protocol handler initialized
    [    1.425942] IR RC6 protocol handler initialized
    [    1.430484] IR JVC protocol handler initialized
    [    1.435027] IR Sony protocol handler initialized
    [    1.439657] IR SANYO protocol handler initialized
    [    1.444372] IR Sharp protocol handler initialized
    [    1.449088] IR MCE Keyboard/mouse protocol handler initialized
    [    1.454934] IR XMP protocol handler initialized
    [    1.459797] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor d   river
    [    1.467634] usb 1-1: new high-speed USB device number 2 using ehci-brcm
    [    1.504913] brcmstb-avs-cpufreq f04c4000.avs-cpu-data-mem: registered
    [    1.511597] sdhci: Secure Digital Host Controller Interface driver
    [    1.517791] sdhci: Copyright(c) Pierre Ossman
    [    1.522162] sdhci-pltfm: SDHCI platform and OF driver helper
    [    1.529054] sdhci-brcmstb f0200200.sdhci: No vmmc regulator found
    [    1.535161] sdhci-brcmstb f0200200.sdhci: No vqmmc regulator found
    [    1.571756] mmc0: SDHCI controller on f0200200.sdhci [f0200200.sdhci] using A   DMA
    [    1.581399] usbcore: registered new interface driver usbhid
    [    1.586988] usbhid: USB HID core driver
    [    1.594276] NET: Registered protocol family 17
    [    1.598848] Key type dns_resolver registered
    [    1.603267] Registering SWP/SWPB emulation handler
    [    1.612608] ALSA device list:
    [    1.615595]   No soundcards found.
    [    1.619227] hub 1-1:1.0: USB hub found
    [    1.624193] hub 1-1:1.0: 4 ports detected
    [    1.632964] Waiting for root device /dev/mmcblk0p7...
    [    1.667426] mmc0: MAN_BKOPS_EN bit is not set
    [    1.678016] mmc0: new high speed MMC card at address 0001
    [    1.683631] mmcblk0: mmc0:0001 4FTE4R 3.64 GiB
    [    1.688219] mmcblk0boot0: mmc0:0001 4FTE4R partition 1 4.00 MiB
    [    1.694192] mmcblk0boot1: mmc0:0001 4FTE4R partition 2 4.00 MiB
    [    1.700161] mmcblk0rpmb: mmc0:0001 4FTE4R partition 3 512 KiB
    [    1.708568]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
    [    1.739348] EXT4-fs: Warning: mounting with data=journal disables delayed all   ocation and O_DIRECT support!
    [    1.896777] usb 1-1.2: new high-speed USB device number 3 using ehci-brcm
    [    1.979114] usb-storage 1-1.2:1.0: USB Mass Storage device detected
    [    1.986081] scsi host1: usb-storage 1-1.2:1.0
    [    2.053779] usb 1-1.4: new high-speed USB device number 4 using ehci-brcm
    [    2.674845] EXT4-fs (mmcblk0p7): warning: maximal mount count reached, runnin   g e2fsck is recommended
    [    2.684540] EXT4-fs (mmcblk0p7): recovery complete
    [    2.689556] EXT4-fs (mmcblk0p7): mounted filesystem with journalled data mode   . Opts: data=journal
    [    2.698479] VFS: Mounted root (ext4 filesystem) on device 179:7.
    [    2.704884] devtmpfs: mounted
    [    2.708065] Freeing unused kernel memory: 304K (c0800000 - c084c000)
    [    2.984005] EXT4-fs (mmcblk0p7): re-mounted. Opts: nodelalloc,data=journal
    [    2.991893] usb-storage 1-1.2:1.0: Max LUN 17 is not valid, using 0 instead
    [    3.002602] scsi 1:0:0:0: CD-ROM            RTK      Driver Storage   1.00 PQ   : 0 ANSI: 0 CCS
    [    3.011890] scsi 1:0:0:0: Attached scsi generic sg0 type 5
    [    3.059152] sr 1:0:0:0: [sr0] scsi3-mmc drive: 0x/0x caddy
    [    3.064684] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    3.080996] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [    3.230773] usb 1-1.4: reset high-speed USB device number 4 using ehci-brcm
    [    3.324497] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 d   etected
    [    3.360496] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
    [    3.367890] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [    3.368512] usbcore: registered new interface driver rt2800usb
    [    3.553186] random: dd urandom read with 34 bits of entropy available
    [    3.620958] procmk_init
    [    3.627581] bcm_event: module license 'Proprietary' taints kernel.
    [    3.633808] Disabling lock debugging due to kernel taint
    [    3.832785] nexus.ko: virtual irq: enabled (267)
    [    3.837488] nexus.ko: shared gpio banks: enabled
    [    6.904028] DVB: registering new adapter (_vuplus_zero4k_)
    [    7.377489] bcm7252s: hotplug_callback():
    [    7.377489] Hotplug - status.connected 1:0:1
    [    7.384640] bcm7252s: hotplug_callback():
    [    7.384640] Hotplug - connecting HDMI to display 0xe
    [    7.583754] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
    [    7.613789] [MPVR]: >> misc_pvr_init
    [    7.621397] [VID]: 6bcm7335_video_init
    [    7.625670] [AUD]: 6bcm7335_audio_init
    [    7.631230] [AUD]: >> bcm_audio_capture_init
    [    7.639840] qam=0, ofdm=0, satellite=1
    [    7.659432] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)   ...
    [    7.707058] input: dreambox advanced remote control (native) as /devices/virt   ual/input/input0
    [    7.721044] [LCD]: registered
    [    7.828862] [CI]: registered ci0
    [    8.977072] [CI]: CI interface initialised
    [    8.977072]
    [    8.988826] [DFP]: registered dbox fp
    [    8.995161] [SC]: registered sci0
    [    9.135757] system_time_set wakeup mode get
    [    9.199764] system_time_set wakeup mode get 0xc4
    [    9.524385] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmwa   re file 'rt2870.bin'
    [    9.534071] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detec   ted - version: 0.36
    [    9.933761] random: nonblocking pool is initialized
    [   11.045567] wlan0: authenticate with cc:be:59:f7:ef:a6
    [   11.076138] wlan0: send auth to cc:be:59:f7:ef:a6 (try 1/3)
    [   11.083650] wlan0: authenticated
    [   11.087762] wlan0: associate with cc:be:59:f7:ef:a6 (try 1/3)
    [   11.105636] wlan0: RX AssocResp from cc:be:59:f7:ef:a6 (capab=0x411 status=0    aid=4)
    [   11.120384] wlan0: associated
    [   12.112133] NET: Registered protocol family 10
    [   12.248496] Bluetooth: Core ver 2.20
    [   12.252151] NET: Registered protocol family 31
    [   12.256637] Bluetooth: HCI device and connection manager initialized
    [   12.265608] Bluetooth: HCI socket layer initialized
    [   12.271013] Bluetooth: L2CAP socket layer initialized
    [   12.276193] Bluetooth: SCO socket layer initialized
    [   13.174742] [VID]: VIDEO_SET_STREAMTYPE 1
    [   13.178938] [VID]: VIDEO_SELECT_SOURCE 1  0
    [   13.183375] [VID]: VIDEO_PLAY 1  5 0
    [   13.192539] [VID]: VIDEO_CONTINUE 1  1
    [   13.196438] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
    [   13.360558] [VID]: VIDEO_STOP 0  1
    [   13.364875] [VID]: VIDEO_SELECT_SOURCE 0  0
    [   16.420390] [AUD]: AUDIO_SET_MUTE 0
    [   16.425129] [AUD]: AUDIO_SET_MIXER -868254064
    [   16.429604] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
    [   16.434681] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
    [   16.441315] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    [   22.593519] [AUD]: AUDIO_SET_MUTE 1
    [   22.853574] [AUD]: AUDIO_SET_MIXER -868254064
    [   22.858067] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
    [   22.863137] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    [   22.870139] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
    [   23.720908] FE tune
    [   23.896531] [AUD]: AUDIO_SELECT_SOURCE 0
    [   23.901818] [AUD]: AUDIO_SET_BYPASS_MODE 1
    [   23.906017] [AUD]: downmix 0 state : 0
    [   23.909818] [AUD]: AUDIO_PAUSE 3
    [   23.913146] [AUD]: AUDIO_PLAY 3 decoder start : 0
    [   23.919174] [VID]: VIDEO_SELECT_SOURCE 0  0
    [   23.923425] [VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:1920 h:1080
    [   23.930331] [VID]: VIDEO_GET_SIZE aspect: 1 6
    [   23.934730] [VID]: VIDEO_SET_STREAMTYPE 1
    [   23.938906] [VID]: VIDEO_FREEZE 3  0
    [   23.942499] [VID]: VIDEO_PLAY 3  5 2
    [   23.953691] [VID]: VIDEO_SLOWMOTION 0    1
    [   23.959261] [VID]: VIDEO_FAST_FORWARD 0    1 0
    [   23.966464] [VID]: VIDEO_CONTINUE 3  1
    [   23.973119] [AUD]: AUDIO_CONTINUE 3 1 aph=0xcb440400
    [   23.979599] [AUD]: Mute : 1
    [   23.983204] [AUD]: AUDIO_CHANNEL_SELECT 0
    [   24.971038] [VID]: VIDEO_STOP 1  1
    [   24.974571] [AUD]: AUDIO_STOP 0
    [   24.984143] [AUD]: AUDIO_CONTINUE 3 0 aph=0x0
    [   24.988532] [AUD]: AUDIO_CONTINUE aph=0 0 0
    [   26.252084] bcm7252s: hotplug_callback():
    [   26.252084] Hotplug - status.connected 0:1:0
    [   26.935762] >>cid=1, sid=0 r=0 s=0
    [   26.939201] ROLT
    [   27.108505] bcm7252s: hotplug_callback():
    [   27.108505] Hotplug - status.connected 1:0:2
    [   27.423761] >>cid=1, sid=0 r=2 s=0
    [   28.670761] >>cid=1, sid=0 r=2 s=0
    [   29.661763] >>cid=1, sid=0 r=2 s=0
    [   30.691777] >>cid=1, sid=0 r=2 s=0
    [   31.945775] >>cid=1, sid=0 r=2 s=0
    [   32.915772] >>cid=1, sid=0 r=2 s=0
    [   33.906765] >>cid=1, sid=0 r=2 s=0
    [   34.173504] bcm7252s: hotplug_callback():
    [   34.173504] Hotplug - status.connected 0:1:0
    [   34.915775] >>cid=1, sid=0 r=2 s=0
    [   35.030573] bcm7252s: hotplug_callback():
    [   35.030573] Hotplug - status.connected 1:0:2
    [   40.742771] >>cid=1, sid=0 r=2 s=0
    [   41.748762] >>cid=1, sid=0 r=2 s=0
    [   42.094884] bcm7252s: hotplug_callback():
    [   42.094884] Hotplug - status.connected 0:1:0
    [   42.236774] >>cid=1, sid=0 r=2 s=0
    [   42.254348] [AUD]: AUDIO_SET_MUTE 0
    [   42.951508] bcm7252s: hotplug_callback():
    [   42.951508] Hotplug - status.connected 1:0:2
    [   42.958700] bcm7252s: hotplug_callback():
    [   42.958700] Hotplug - connecting HDMI to display 0xf
    [   43.145926] FE tune
    [   43.319207] [AUD]: AUDIO_SELECT_SOURCE 0
    [   43.324715] [AUD]: AUDIO_SET_BYPASS_MODE 1
    [   43.328939] [AUD]: downmix 0 state : 0
    [   43.333076] [AUD]: AUDIO_PAUSE 3
    [   43.336428] [AUD]: AUDIO_PLAY 3 decoder start : 0
    [   43.342329] [VID]: VIDEO_SELECT_SOURCE 0  0
    [   43.346556] [VID]: VIDEO_SET_STREAMTYPE 1
    [   43.350793] [VID]: VIDEO_FREEZE 3  0
    [   43.354391] [VID]: VIDEO_PLAY 3  5 2
    [   43.365511] [VID]: VIDEO_SLOWMOTION 0    1
    [   43.371175] [VID]: VIDEO_FAST_FORWARD 0    1 0
    [   43.378527] [VID]: VIDEO_CONTINUE 3  1
    [   43.384987] [AUD]: AUDIO_CONTINUE 3 1 aph=0xcc37c580
    [   43.391457] [AUD]: Mute : 0
    [   43.400211] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
    [   43.406073] [VID]: VIDEO_GET_SIZE aspect: 1 0
    [   43.494759] >>cid=1, sid=0 r=2 s=0
    [   49.990090] [VID]: VIDEO_STOP 1  1
    [   49.993537] [AUD]: AUDIO_STOP 0
    [   50.021344] [AUD]: AUDIO_CONTINUE 3 0 aph=0x0
    [   50.025716] [AUD]: AUDIO_CONTINUE aph=0 0 0
    [   50.083325] FE tune
    [   50.256114] [AUD]: AUDIO_SELECT_SOURCE 0
    [   50.261594] [AUD]: AUDIO_SET_BYPASS_MODE 1
    [   50.265794] [AUD]: downmix 0 state : 0
    [   50.269699] [AUD]: AUDIO_PAUSE 3
    [   50.273030] [AUD]: AUDIO_PLAY 3 decoder start : 0
    [   50.278999] [VID]: VIDEO_SELECT_SOURCE 0  0
    [   50.283224] [VID]: VIDEO_SET_STREAMTYPE 1
    [   50.287410] [VID]: VIDEO_FREEZE 3  0
    [   50.291068] [VID]: VIDEO_PLAY 3  5 2
    [   50.302177] [VID]: VIDEO_SLOWMOTION 0    1
    [   50.307731] [VID]: VIDEO_FAST_FORWARD 0    1 0
    [   50.314979] [VID]: VIDEO_CONTINUE 3  1
    [   50.321706] [AUD]: AUDIO_CONTINUE 3 1 aph=0xce0f7000
    [   50.328223] [AUD]: Mute : 0
    [   50.336339] [VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
    [   50.342400] [VID]: VIDEO_GET_SIZE aspect: 1 0
    root@vuzero4k:~# openpli 7.3-release vuzero4k

    root@vuzero4k:~# dmesg-sh: openpli: not found
    root@vuzero4k:~#
    root@vuzero4k:~# vuzero4k login: root
    -sh: vuzero4k: not found
    root@vuzero4k:~# root@vuzero4k:~# dmesg
    -sh: root@vuzero4k:~#: not found
    root@vuzero4k:~# [    0.000000] Booting Linux on physical CPU 0x0
    sh: missing ]
    root@vuzero4k:~# [    0.000000] Linux version 4.1.20-1.9 (oe-user@oe-host) (gcc ver
    sion 6.3.0 (GC   C) ) #1 SMP Tue Jul 6 10:32:03 UTC 2021
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] CPU: ARMv7 Processor [420f1000] revision 0 (ARMv7),
    cr=30c5383d
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT alias
    ing instructio   n cache
    sh: missing ]
    root@vuzero4k:~# [    0.000000] Machine model: BCM972604USFF
    sh: missing ]
    root@vuzero4k:~# [    0.000000] moving dtb from 0x0000000007618000 to 0x00000000008
    cd5d0
    sh: missing ]
    root@vuzero4k:~# [    0.000000] bmem: Reserved 699 MiB at 0x0000000052500000
    sh: missing ]
    root@vuzero4k:~# [    0.000000] cma: Reserved 16 MiB at 0x0000000051400000
    sh: missing ]
    root@vuzero4k:~# [    0.000000] Forcing write-allocate cache policy for SMP
    sh: missing ]
    root@vuzero4k:~# [    0.000000] Memory policy: Data cache writealloc
    sh: missing ]
    root@vuzero4k:~# [    0.000000] On node 0 totalpages: 516096
    tash: missing ]
    root@vuzero4k:~# [    0.000000]   DMA zone: 512 pages used for memmap
    sh: missing ]
    root@vuzero4k:~# [    0.000000]   DMA zone: 0 pages reserved
    sh: missing ]
    root@vuzero4k:~# [    0.000000]   DMA zone: 65536 pages, LIFO batch:15
    sh: missing ]
    root@vuzero4k:~# [    0.000000]   HighMem zone: 450560 pages, LIFO batch:31
    sh: missing ]
    root@vuzero4k:~# [    0.000000] psci: probing for conduit method from DT.
    sh: missing ]
    root@vuzero4k:~# [    0.000000] psci: PSCIv0.2 detected in firmware.
    sh: missing ]
    root@vuzero4k:~# [    0.000000] psci: Using standard PSCI v0.2 function IDs
    sh: missing ]
    root@vuzero4k:~# [    0.000000] PERCPU: Embedded 12 pages/cpu @cefb9000 s16844 r819
    2 d24116 u4915   2
    sh: missing ]
    root@vuzero4k:~# [    0.000000] pcpu-alloc: s16844 r8192 d24116 u49152 alloc=12*409
    6
    sh: missing ]
    root@vuzero4k:~# [    0.000000] pcpu-alloc:
  • 0
  • 1
    ersh: missing ]
    root@vuzero4k:~# [    0.000000] Built 1 zonelists in Zone order, mobility grouping
    on.  Total pag   es: 515584
    sh: missing ]
    root@vuzero4k:~# [    0.000000] Kernel command line: root=/dev/mmcblk0p7 rootfstype
    =ext4 rootflag   s=data=journal rootwait rw coherent_pool=2M rw bmem=699m@1317m
    sh: missing ]
    root@vuzero4k:~# [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 1
    31072 bytes)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65
    536 bytes)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] Memory: 1306508K/2064384K available (6111K kernel c
    ode, 310K rwda   ta, 2044K rodata, 304K init, 197K bss, 741492K reserved, 16384K cm
    a-reserved, 10   70076K highmem)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] Virtual kernel memory layout:
    sh: missing ]
    root@vuzero4k:~# [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000]       .text : 0xc0008000 - 0xc07ff280   (8157 kB)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000]       .init : 0xc0800000 - 0xc084c000   ( 304 kB)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000]       .data : 0xc084c000 - 0xc0899bb0   ( 311 kB)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000]        .bss : 0xc089c000 - 0xc08cd5d0   ( 198 kB)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] Hierarchical RCU implementation.
    sh: missing ]
    root@vuzero4k:~# [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=
    2.
    sh: missing ]
    root@vuzero4k:~# [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_
    cpu_ids=2
    sh: missing ]
    root@vuzero4k:~# [    0.000000] NR_IRQS:16 nr_irqs:16 16
    sh: missing ]
    root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0802000
    , parent irq:    89)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0808000
    , parent irq:    61)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080aa00
    , parent irq:    62)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080c640
    , parent irq:    91)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd080e200
    , parent irq:    57)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0810500
    , parent irq:    95)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0812400
    , parent irq:    96)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0814540
    , parent irq:    93)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0816440
    , parent irq:    94)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd0818480
    , parent irq:    98)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] MCP: Enabling write pairing
    sh: missing ]
    root@vuzero4k:~# [    0.000000] Architected cp15 timer(s) running at 27.00MHz (phys
    ).
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000000] clocksource arch_sys_counter: mask: 0xfffffffffffff
    f max_cycles:    0x63a1e71a3, max_idle_ns: 440795203123 ns
    sh: missing ]
    root@vuzero4k:~# [    0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wra
    ps every 43980   46511093ns
    sh: missing ]
    root@vuzero4k:~# [    0.000010] Switching to timer-based delay loop, resolution 37n
    s
    sh: missing ]
    root@vuzero4k:~# [    0.000370] Console: colour dummy device 80x30
    sh: missing ]
    root@vuzero4k:~# [    0.000388] Calibrating delay loop (skipped), value calculated
    using timer fr   equency.. 54.00 BogoMIPS (lpj=27000)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000396] pid_max: default: 32768 minimum: 301
    sh: missing ]
    root@vuzero4k:~# [    0.000487] Mount-cache hash table entries: 1024 (order: 0, 409
    6 bytes)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000492] Mountpoint-cache hash table entries: 1024 (order: 0
    , 4096 bytes)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.000844] CPU: Testing write buffer coherency: ok
    sh: missing ]
    root@vuzero4k:~# [    0.001047] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    sh: missing ]
    root@vuzero4k:~# [    0.001081] Setting up static identity map for 0x8480 - 0x84d8
    sh: missing ]
    root@vuzero4k:~# [    0.014843] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    sh: missing ]
    root@vuzero4k:~# [    0.014889] Brought up 2 CPUs
    sh: missing ]
    root@vuzero4k:~# [    0.014899] SMP: Total of 2 processors activated (108.00 BogoMI
    PS).
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.014903] CPU: All CPU(s) started in HYP mode.
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.014905] CPU: Virtualization extensions available.
    sh: missing ]
    root@vuzero4k:~# [    0.015176] devtmpfs: initialized
    sh: missing ]
    root@vuzero4k:~# [    0.022916] VFP support v0.3: implementor 42 architecture 3 par
    t 10 variant 0    rev 0
    sh: missing ]
    root@vuzero4k:~# [    0.023104] clocksource jiffies: mask: 0xffffffff max_cycles: 0
    xffffffff, max   _idle_ns: 1911260446275000 ns
    sh: missing ]
    root@vuzero4k:~# [    0.024135] NET: Registered protocol family 16
    sh: missing ]
    root@vuzero4k:~# [    0.025280] DMA: preallocated 2048 KiB pool for atomic coherent
    allocations
    sh: missing ]
    root@vuzero4k:~# [    0.029942] cpuidle: using governor ladder
    sh: missing ]
    root@vuzero4k:~# [    0.035951] cpuidle: using governor menu
    sh: missing ]
    root@vuzero4k:~# [    0.041260] No ATAGs?
    sh: missing ]
    root@vuzero4k:~# [    0.041294] hw-breakpoint: found 5 (+1 reserved) breakpoint and
    4 watchpoint    registers.
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.041301] hw-breakpoint: maximum watchpoint size is 8 bytes.
    sh: missing ]
    root@vuzero4k:~# [    0.041583] Broadcom Brahma-B15 readahead cache at: 0xd0aaa478
    sh: missing ]
    root@vuzero4k:~# [    0.052097] brcmstb-gpio f040a400.gpio: Registered 3 banks (GPI
    O(s): 0-95)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.052273] brcmstb-gpio f04174c0.gpio: Registered 2 banks (GPI
    O(s): 96-159)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.052597] SCSI subsystem initialized
    sh: missing ]
    root@vuzero4k:~# [    0.053216] libata version 3.00 loaded.
    sh: missing ]
    root@vuzero4k:~# [    0.053382] usbcore: registered new interface driver usbfs
    sh: missing ]
    root@vuzero4k:~# [    0.053419] usbcore: registered new interface driver hub
    sh: missing ]
    root@vuzero4k:~# [    0.053447] usbcore: registered new device driver usb
    sh: missing ]
    root@vuzero4k:~# [    0.053500] Linux video capture interface: v2.00
    sh: missing ]
    root@vuzero4k:~# [    0.053555] pps_core: LinuxPPS API ver. 1 registered
    xHCI sh: missing ]
    root@vuzero4k:~# [    0.053559] pps_core: Software ver. 5.3.6 - Copyright 2005-2007
    Rodolfo Giome   tti <giometti@linux.it>
    -sh: syntax error: unexpected newline
    root@vuzero4k:~# [    0.053574] PTP clock support registered
    sh: missing ]
    root@vuzero4k:~# [    0.053926] Advanced Linux Sound Architecture Driver Initialize
    d.
    sh: missing ]
    root@vuzero4k:~# [    0.054749] Switched to clocksource arch_sys_counter
    sh: missing ]
    root@vuzero4k:~# [    0.054904] FS-Cache: Loaded
    sh: missing ]
    root@vuzero4k:~# [    0.060731] thermal thermal_zone0: failed to read out thermal z
    one (-22)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.060870] NET: Registered protocol family 2
    sh: missing ]
    root@vuzero4k:~# [    0.061247] TCP established hash table entries: 2048 (order: 1,
    8192 bytes)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.061264] TCP bind hash table entries: 2048 (order: 2, 16384
    bytes)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.061286] TCP: Hash tables configured (established 2048 bind
    2048)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.061325] UDP hash table entries: 256 (order: 1, 8192 bytes)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.061338] UDP-Lite hash table entries: 256 (order: 1, 8192 by
    tes)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.061447] NET: Registered protocol family 1
    sh: missing ]
    root@vuzero4k:~# [    0.061638] RPC: Registered named UNIX socket transport module.
    sh: missing ]
    root@vuzero4k:~# [    0.061641] RPC: Registered udp transport module.
    sh: missing ]
    root@vuzero4k:~# [    0.061644] RPC: Registered tcp transport module.
    sh: missing ]
    root@vuzero4k:~# [    0.061647] RPC: Registered tcp NFSv4.1 backchannel transport m
    odule.
    sh: missing ]
    root@vuzero4k:~# [    0.061660] PCI: CLS 0 bytes, default 64
    sh: missing ]
    root@vuzero4k:~# [    0.062032] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
    sh: missing ]
    root@vuzero4k:~# [    0.062054] hw perfevents: enabled with armv7_cortex_a15 PMU dr
    iver, 7 counte   rs available
    sh: missing ]
    root@vuzero4k:~# [    0.062827] futex hash table entries: 512 (order: 3, 32768 byte
    s)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.063689] NFS: Registering the id_resolver key type
    sh: missing ]
    root@vuzero4k:~# [    0.063711] Key type id_resolver registered
    sh: missing ]
    root@vuzero4k:~# [    0.063715] Key type id_legacy registered
    sh: missing ]
    root@vuzero4k:~# [    0.063726] nfs4filelayout_init: NFSv4 File Layout Driver Regis
    tering...
    sh: missing ]
    root@vuzero4k:~# [    0.063732] Installing knfsd (copyright (C) 1996 okir@monad.swb
    .de).
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.064169] fuse init (API version 7.23)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.064780] bounce: pool size: 64 pages
    sh: missing ]
    root@vuzero4k:~# [    0.064809] Block layer SCSI generic (bsg) driver version 0.4 l
    oaded (major 2   52)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.064817] io scheduler noop registered
    sh: missing ]
    root@vuzero4k:~# [    0.064823] io scheduler deadline registered
    sh: missing ]
    root@vuzero4k:~# [    0.064838] io scheduler cfq registered (default)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.065084] brcm-gisb-arb f0400000.gisb-arb: registered mem: d0
    aca000, irqs:    261, 262
    sh: missing ]
    root@vuzero4k:~# [    0.065633] brcmstb-sata-phy f0b10100.sata_phy: registered 1 po
    rt(s)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.065990] brcm-pci f0460000.pcie: adjusting to legacy (broken
    ) pcie DT
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.066043] brcm-pci f0460000.pcie: no identity map; PCI driver
    s may fail
    sh: missing ]
    -sh: PCI: not found
    root@vuzero4k:~# [    0.166173] brcm-pci f0460000.pcie: link down
    sh: missing ]
    root@vuzero4k:~# [    0.167498] brcmstb_memc f1102000.memc-ddr: registered
    sh: missing ]
    root@vuzero4k:~# [    0.167683] brcm-waketimer f0417680.waketimer: registered, with
    irq 264
    sh: missing ]
    root@vuzero4k:~# [    0.167861] Serial: 8250/16550 driver, 4 ports, IRQ sharing dis
    abled
    sh: missing ]
    root@vuzero4k:~# [    0.168784] console [ttyS0] disabled
    sh: missing ]
    root@vuzero4k:~# [    0.168809] f040c000.serial: ttyS0 at MMIO 0xf040c000 (irq = 10
    0, base_baud =    5062500) is a 16550A
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.910515] console [ttyS0] enabled
    sh: missing ]
    root@vuzero4k:~# [    0.914332] f040d000.serial: ttyS1 at MMIO 0xf040d000 (irq = 10
    1, base_baud =    5062500) is a 16550A
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.923582] f040e000.serial: ttyS2 at MMIO 0xf040e000 (irq = 10
    2, base_baud =    5062500) is a 16550A
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    0.935574] loop: module loaded
    sh: missing ]
    root@vuzero4k:~# [    0.939409] brcm-ahci f0b12000.sata: controller can do ALPM, tu
    rning on CAP_A   LPM
    sh: missing ]
    root@vuzero4k:~# [    0.946826] brcm-ahci f0b12000.sata: masking port_map 0x1 -> 0x
    1
    sh: missing ]
    root@vuzero4k:~# [    0.952856] brcm-ahci f0b12000.sata: SSS flag set, parallel bus
    scan disabled
    sh: missing ]
    root@vuzero4k:~# [    0.970766] brcm-ahci f0b12000.sata: AHCI 0001.0300 32 slots 1
    ports 6 Gbps 0   x1 impl platform mode
    sh: missing ]
    root@vuzero4k:~# [    0.979748] brcm-ahci f0b12000.sata: flags: 64bit ncq sntf stag
    pm clo pmp sl   um part
    sh: missing ]
    root@vuzero4k:~# [    0.988259] scsi host0: brcm-ahci
    sh: missing ]
    root@vuzero4k:~# [    0.991722] ata1: SATA max UDMA/133 mmio [mem 0xf0b12000-0xf0b1
    299b] port 0x1   00 irq 87
    sh: missing ]
    root@vuzero4k:~# [    0.999657] brcm-ahci f0b12000.sata: Broadcom AHCI SATA3 regist
    ered
    sh: missing ]
    root@vuzero4k:~# [    1.007026] libphy: Fixed MDIO Bus: probed
    sh: missing ]
    root@vuzero4k:~# [    1.011508] bcmgenet f0480000.ethernet: GENET 5.0 EPHY: 0x0000
    sh: missing ]
    root@vuzero4k:~# [    1.017403] bcmgenet f0480000.ethernet: failed to get enet-mux
    clock
    sh: missing ]
    root@vuzero4k:~# [    1.036749] libphy: bcmgenet MII bus: probed
    sh: missing ]
    root@vuzero4k:~# [    1.060901] Broadcom BCM7260 f0480000.etherne:01: failed to req
    uest GPHY cloc   k
    sh: missing ]
    root@vuzero4k:~# [    1.068761] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    1.074604] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    1.080702] xhci-brcm: xHCI BRCM driver
    sh: missing ]
    root@vuzero4k:~# [    1.084708] ehci-brcm: EHCI BRCM driver
    sh: missing ]
    root@vuzero4k:~# [    1.102876] ehci-brcm f0b00300.ehci_v2: EHCI Host Controller
    sh: missing ]
    root@vuzero4k:~# [    1.104765] ata1: SATA link down (SStatus 0 SControl 300)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    1.114054] ehci-brcm f0b00300.ehci_v2: new USB bus registered,
    assigned bus    number 1
    sh: missing ]
    root@vuzero4k:~# [    1.132033] ehci-brcm f0b00300.ehci_v2: irq 120, io mem 0xf0b00
    300
    sh: missing ]
    root@vuzero4k:~# [    1.143756] ehci-brcm f0b00300.ehci_v2: USB 2.0 started, EHCI 1
    .00
    sh: missing ]
    root@vuzero4k:~# [    1.150336] hub 1-0:1.0: USB hub found
    sh: missing ]
    root@vuzero4k:~# [    1.154108] hub 1-0:1.0: 1 port detected
    sh: missing ]
    root@vuzero4k:~# [    1.158296] ehci-brcm f0b00500.ehci_v2: EHCI Host Controller
    sh: missing ]
    root@vuzero4k:~# [    1.164045] ehci-brcm f0b00500.ehci_v2: new USB bus registered,
    assigned bus    number 2
    sh: missing ]
    root@vuzero4k:~# [    1.181995] ehci-brcm f0b00500.ehci_v2: irq 123, io mem 0xf0b00
    500
    sh: missing ]
    root@vuzero4k:~# [    1.193757] ehci-brcm f0b00500.ehci_v2: USB 2.0 started, EHCI 1
    .00
    sh: missing ]
    root@vuzero4k:~# [    1.200284] hub 2-0:1.0: USB hub found
    sh: missing ]
    root@vuzero4k:~# [    1.204053] hub 2-0:1.0: 1 port detected
    sh: missing ]
    root@vuzero4k:~# [    1.208281] ohci-brcm: OHCI BRCM driver
    sh: missing ]
    oroot@vuzero4k:~# [    1.212241] ohci-brcm f0b00400.ohci_v2: BRCM OHCI controller
    sh: missing ]
    root@vuzero4k:~# [    1.217996] ohci-brcm f0b00400.ohci_v2: new USB bus registered,
    assigned bus    number 3
    sh: missing ]
    root@vuzero4k:~# [    1.225917] ohci-brcm f0b00400.ohci_v2: irq 121, io mem 0xf0b00
    400
    sh: missing ]
    root@vuzero4k:~# [    1.287101] hub 3-0:1.0: USB hub found
    sh: missing ]
    root@vuzero4k:~# [    1.290875] hub 3-0:1.0: 1 port detected
    sh: missing ]
    root@vuzero4k:~# [    1.295031] ohci-brcm f0b00600.ohci_v2: BRCM OHCI controller
    sh: missing ]
    root@vuzero4k:~# [    1.300798] ohci-brcm f0b00600.ohci_v2: new USB bus registered,
    assigned bus    number 4
    sh: missing ]
    root@vuzero4k:~# [    1.309246] ohci-brcm f0b00600.ohci_v2: irq 124, io mem 0xf0b00
    600
    sh: missing ]
    root@vuzero4k:~# [    1.370097] hub 4-0:1.0: USB hub found
    sh: missing ]
    root@vuzero4k:~# [    1.373868] hub 4-0:1.0: 1 port detected
    sh: missing ]
    root@vuzero4k:~# [    1.378119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
    Driver
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    1.384669] ehci-pci: EHCI PCI platform driver
    sh: missing ]
    root@vuzero4k:~# [    1.389181] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Dri
    ver
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    1.395384] ohci-pci: OHCI PCI platform driver
    sh: missing ]
    root@vuzero4k:~# [    1.399961] usbcore: registered new interface driver usb-storag
    e
    sh: missing ]
    root@vuzero4k:~# [    1.406127] mousedev: PS/2 mouse device common for all mice
    sh: missing ]
    root@vuzero4k:~# [    1.412155] i2c /dev entries driver
    sh: missing ]
    root@vuzero4k:~# [    1.416331] IR NEC protocol handler initialized
    sh: missing ]
    root@vuzero4k:~# [    1.420877] IR RC5(x/sz) protocol handler initialized
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    1.425942] IR RC6 protocol handler initialized
    sh: missing ]
    root@vuzero4k:~# [    1.430484] IR JVC protocol handler initialized
    sh: missing ]
    root@vuzero4k:~# [    1.435027] IR Sony protocol handler initialized
    sh: missing ]
    root@vuzero4k:~# [    1.439657] IR SANYO protocol handler initialized
    sh: missing ]
    root@vuzero4k:~# [    1.444372] IR Sharp protocol handler initialized
    sh: missing ]
    root@vuzero4k:~# [    1.449088] IR MCE Keyboard/mouse protocol handler initialized
    sh: missing ]
    root@vuzero4k:~# [    1.454934] IR XMP protocol handler initialized
    sh: missing ]
    root@vuzero4k:~# [    1.459797] brcmstb_thermal f04d1500.thermal: registered AVS TM
    ON of-sensor d   river
    sh: missing ]
    root@vuzero4k:~# [    1.467634] usb 1-1: new high-speed USB device number 2 using e
    hci-brcm
    sh: missing ]
    root@vuzero4k:~# [    1.504913] brcmstb-avs-cpufreq f04c4000.avs-cpu-data-mem: regi
    stered
    sh: missing ]
    root@vuzero4k:~# [    1.511597] sdhci: Secure Digital Host Controller Interface dri
    ver
    sh: missing ]
    root@vuzero4k:~# [    1.517791] sdhci: Copyright(c) Pierre Ossman
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    1.522162] sdhci-pltfm: SDHCI platform and OF driver helper
    sh: missing ]
    root@vuzero4k:~# [    1.529054] sdhci-brcmstb f0200200.sdhci: No vmmc regulator fou
    nd
    sh: missing ]
    root@vuzero4k:~# [    1.535161] sdhci-brcmstb f0200200.sdhci: No vqmmc regulator fo
    und
    sh: missing ]
    root@vuzero4k:~# [    1.571756] mmc0: SDHCI controller on f0200200.sdhci [f0200200.
    sdhci] using A   DMA
    sh: missing ]
    root@vuzero4k:~# [    1.581399] usbcore: registered new interface driver usbhid
    sh: missing ]
    root@vuzero4k:~# [    1.586988] usbhid: USB HID core driver
    sh: missing ]
    root@vuzero4k:~# [    1.594276] NET: Registered protocol family 17
    sh: missing ]
    root@vuzero4k:~# [    1.598848] Key type dns_resolver registered
    sh: missing ]
    root@vuzero4k:~# [    1.603267] Registering SWP/SWPB emulation handler
    sh: missing ]
    root@vuzero4k:~# [    1.612608] ALSA device list:
    sh: missing ]
    root@vuzero4k:~# [    1.615595]   No soundcards found.
    sh: missing ]
    root@vuzero4k:~# [    1.619227] hub 1-1:1.0: USB hub found
    sh: missing ]
    root@vuzero4k:~# [    1.624193] hub 1-1:1.0: 4 ports detected
    sh: missing ]
    root@vuzero4k:~# [    1.632964] Waiting for root device /dev/mmcblk0p7...
    sh: missing ]
    root@vuzero4k:~# [    1.667426] mmc0: MAN_BKOPS_EN bit is not set
    sh: missing ]
    root@vuzero4k:~# [    1.678016] mmc0: new high speed MMC card at address 0001
    sh: missing ]
    root@vuzero4k:~# [    1.683631] mmcblk0: mmc0:0001 4FTE4R 3.64 GiB
    sh: missing ]
    root@vuzero4k:~# [    1.688219] mmcblk0boot0: mmc0:0001 4FTE4R partition 1 4.00 MiB
    sh: missing ]
    etroot@vuzero4k:~# [    1.694192] mmcblk0boot1: mmc0:0001 4FTE4R partition 2 4.00 MiB
    sh: missing ]
    root@vuzero4k:~# [    1.700161] mmcblk0rpmb: mmc0:0001 4FTE4R partition 3 512 KiB
    sh: missing ]
    root@vuzero4k:~# [    1.708568]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
    sh: missing ]
    E 1
    [ root@vuzero4k:~# [    1.739348] EXT4-fs: Warning: mounting with data=journal disabl
    es delayed all   ocation and O_DIRECT support!
    sh: missing ]
    root@vuzero4k:~# [    1.896777] usb 1-1.2: new high-speed USB device number 3 using
    ehci-brcm
    sh: missing ]
    root@vuzero4k:~# [    1.979114] usb-storage 1-1.2:1.0: USB Mass Storage device dete
    cted
    sh: missing ]
    root@vuzero4k:~# [    1.986081] scsi host1: usb-storage 1-1.2:1.0
    sh: missing ]
    root@vuzero4k:~# [    2.053779] usb 1-1.4: new high-speed USB device number 4 using
    ehci-brcm
    sh: missing ]
    root@vuzero4k:~# [    2.674845] EXT4-fs (mmcblk0p7): warning: maximal mount count r
    eached, runnin   g e2fsck is recommended
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    2.684540] EXT4-fs (mmcblk0p7): recovery complete
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    2.689556] EXT4-fs (mmcblk0p7): mounted filesystem with journa
    lled data mode   . Opts: data=journal
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    2.698479] VFS: Mounted root (ext4 filesystem) on device 179:7
    .
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    2.704884] devtmpfs: mounted
    sh: missing ]
    root@vuzero4k:~# [    2.708065] Freeing unused kernel memory: 304K (c0800000 - c084
    c000)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    2.984005] EXT4-fs (mmcblk0p7): re-mounted. Opts: nodelalloc,d
    ata=journal
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    2.991893] usb-storage 1-1.2:1.0: Max LUN 17 is not valid, usi
    ng 0 instead
    sh: missing ]
    root@vuzero4k:~# [    3.002602] scsi 1:0:0:0: CD-ROM            RTK      Driver Sto
    rage   1.00 PQ   : 0 ANSI: 0 CCS
    sh: missing ]
    root@vuzero4k:~# [    3.011890] scsi 1:0:0:0: Attached scsi generic sg0 type 5
    sh: missing ]
    root@vuzero4k:~# [    3.059152] sr 1:0:0:0: [sr0] scsi3-mmc drive: 0x/0x caddy
    sh: missing ]
    root@vuzero4k:~# [    3.064684] cdrom: Uniform CD-ROM driver Revision: 3.20
    sh: missing ]
    root@vuzero4k:~# [    3.080996] sr 1:0:0:0: Attached scsi CD-ROM sr0
    sh: missing ]
    root@vuzero4k:~# [    3.230773] usb 1-1.4: reset high-speed USB device number 4 usi
    ng ehci-brcm
    sh: missing ]
    root@vuzero4k:~# [    3.324497] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 53
    90, rev 0502 d   etected
    sh: missing ]
    root@vuzero4k:~# [    3.360496] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 53
    70 detected
    sh: missing ]
    root@vuzero4k:~# [    3.367890] ieee80211 phy0: Selected rate control algorithm 'mi
    nstrel_ht'
    sh: missing ]
    root@vuzero4k:~# [    3.368512] usbcore: registered new interface driver rt2800usb
    sh: missing ]
    root@vuzero4k:~# [    3.553186] random: dd urandom read with 34 bits of entropy ava
    ilable
    sh: missing ]
    root@vuzero4k:~# [    3.620958] procmk_init
    88sh: missing ]
    root@vuzero4k:~# [    3.627581] bcm_event: module license 'Proprietary' taints kern
    el.
    sh: missing ]
    root@vuzero4k:~# [    3.633808] Disabling lock debugging due to kernel taint
    sh: missing ]
    root@vuzero4k:~# [    3.832785] nexus.ko: virtual irq: enabled (267)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    3.837488] nexus.ko: shared gpio banks: enabled
    sh: missing ]
    root@vuzero4k:~# [    6.904028] DVB: registering new adapter (_vuplus_zero4k_)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    7.377489] bcm7252s: hotplug_callback():
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    7.377489] Hotplug - status.connected 1:0:1
    sh: missing ]
    root@vuzero4k:~# [    7.384640] bcm7252s: hotplug_callback():
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    7.384640] Hotplug - connecting HDMI to display 0xe
    sh: missing ]
    root@vuzero4k:~# [    7.583754] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
    sh: missing ]
    root@vuzero4k:~# [    7.613789] [MPVR]: >> misc_pvr_init
    sh: missing ]
    root@vuzero4k:~# [    7.621397] [VID]: 6bcm7335_video_init
    sh: missing ]
    root@vuzero4k:~# [    7.625670] [AUD]: 6bcm7335_audio_init
    sh: missing ]
    root@vuzero4k:~# [    7.631230] [AUD]: >> bcm_audio_capture_init
    sh: missing ]
    root@vuzero4k:~# [    7.639840] qam=0, ofdm=0, satellite=1
    sh: missing ]
    root@vuzero4k:~# [    7.659432] BRCM brcm_dvb0: DVB: registering adapter 0 frontend
    0 (Vuplus FE)   ...
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    7.707058] input: dreambox advanced remote control (native) as
    /devices/virt   ual/input/input0
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [    7.721044] [LCD]: registered
    sh: missing ]
    root@vuzero4k:~# [    7.828862] [CI]: registered ci0
    sh: missing ]
    root@vuzero4k:~# [    8.977072] [CI]: CI interface initialised
    sh: missing ]
    root@vuzero4k:~# [    8.977072]
    sh: missing ]
    root@vuzero4k:~# [    8.988826] [DFP]: registered dbox fp
    sh: missing ]
    root@vuzero4k:~# [    8.995161] [SC]: registered sci0
    sh: missing ]
    root@vuzero4k:~# [    9.135757] system_time_set wakeup mode get
    sh: missing ]
    root@vuzero4k:~# [    9.199764] system_time_set wakeup mode get 0xc4
    sh: missing ]
    root@vuzero4k:~# [    9.524385] ieee80211 phy0: rt2x00lib_request_firmware: Info -
    Loading firmwa   re file 'rt2870.bin'
    sh: missing ]
    root@vuzero4k:~# [    9.534071] ieee80211 phy0: rt2x00lib_request_firmware: Info -
    Firmware detec   ted - version: 0.36
    sh: missing ]
    root@vuzero4k:~# [    9.933761] random: nonblocking pool is initialized
    sh: missing ]
    root@vuzero4k:~# [   11.045567] wlan0: authenticate with cc:be:59:f7:ef:a6
    sh: missing ]
    root@vuzero4k:~# [   11.076138] wlan0: send auth to cc:be:59:f7:ef:a6 (try 1/3)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [   11.083650] wlan0: authenticated
    sh: missing ]
    root@vuzero4k:~# [   11.087762] wlan0: associate with cc:be:59:f7:ef:a6 (try 1/3)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [   11.105636] wlan0: RX AssocResp from cc:be:59:f7:ef:a6 (capab=0
    x411 status=0    aid=4)
    -sh: syntax error: unexpected "("
    root@vuzero4k:~# [   11.120384] wlan0: associated
    sh: missing ]
    root@vuzero4k:~# [   12.112133] NET: Registered protocol family 10
    sh: missing ]
    root@vuzero4k:~# [   12.248496] Bluetooth: Core ver 2.20
    sh: missing ]
    root@vuzero4k:~# [   12.252151] NET: Registered protocol family 31
    sh: missing ]
    root@vuzero4k:~# [   12.256637] Bluetooth: HCI device and connection manager initia
    lized
    sh: missing ]
    root@vuzero4k:~# [   12.265608] Bluetooth: HCI socket layer initialized
    sh: missing ]
    root@vuzero4k:~# [   12.271013] Bluetooth: L2CAP socket layer initialized
    sh: missing ]
    root@vuzero4k:~# [   12.276193] Bluetooth: SCO socket layer initialized
    sh: missing ]
    root@vuzero4k:~# [   13.174742] [VID]: VIDEO_SET_STREAMTYPE 1
    sh: missing ]
    root@vuzero4k:~# [   13.178938] [VID]: VIDEO_SELECT_SOURCE 1  0
    sh: missing ]
    root@vuzero4k:~# [   13.183375] [VID]: VIDEO_PLAY 1  5 0
    sh: missing ]
    root@vuzero4k:~# [   13.192539] [VID]: VIDEO_CONTINUE 1  1
    sh: missing ]
    root@vuzero4k:~# [   13.196438] [VID]: VIDEO_CLEAR_BUFFER 1  1 0
    sh: missing ]
    root@vuzero4k:~# [   13.360558] [VID]: VIDEO_STOP 0  1
    sh: missing ]
    root@vuzero4k:~# [   13.364875] [VID]: VIDEO_SELECT_SOURCE 0  0
    sh: missing ]
    root@vuzero4k:~# [   16.420390] [AUD]: AUDIO_SET_MUTE 0
    sh: missing ]
    root@vuzero4k:~# [   16.425129] [AUD]: AUDIO_SET_MIXER -868254064
    sh: missing ]
    root@vuzero4k:~# [   16.429604] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
    sh: missing ]
    root@vuzero4k:~# [   16.434681] [AUD]: AUDIO_SET_MIXER : next left volume 0, right
    volume 0
    sh: missing ]
    root@vuzero4k:~# [   16.441315] [AUD]: AUDIO_SET_MIXER : next left volume -70, righ
    t volume -70
    sh: missing ]
    root@vuzero4k:~# [   22.593519] [AUD]: AUDIO_SET_MUTE 1
    sh: missing ]
    root@vuzero4k:~# [   22.853574] [AUD]: AUDIO_SET_MIXER -868254064
    sh: missing ]
    root@vuzero4k:~# [   22.858067] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
    sh: missing ]
    root@vuzero4k:~# [   22.863137] [AUD]: AUDIO_SET_MIXER : next left volume -70, righ
    t volume -70
    sh: missing ]
    root@vuzero4k:~# [   22.870139] [AUD]: AUDIO_SET_MIXER : next left volume -70, righ
    t volume -70
    sh: missing ]
    root@vuzero4k:~# [   23.720908] FE tune
    sh: missing ]
    root@vuzero4k:~# [   23.896531] [AUD]: AUDIO_SELECT_SOURCE 0
    sh: missing ]
    root@vuzero4k:~# [   23.901818] [AUD]: AUDIO_SET_BYPASS_MODE 1
    sh: missing ]
    root@vuzero4k:~# [   23.906017] [AUD]: downmix 0 state : 0
    sh: missing ]
    root@vuzero4k:~# [   23.909818] [AUD]: AUDIO_PAUSE 3
    sh: missing ]
    root@vuzero4k:~# [   23.913146] [AUD]: AUDIO_PLAY 3 decoder start : 0
    sh: missing ]
    root@vuzero4k:~# [   23.919174] [VID]: VIDEO_SELECT_SOURCE 0  0
    sh: missing ]
    root@vuzero4k:~# [   23.923425] [VID]: VIDEO_GET_SIZE src w: 1920 h:1080 display w:
    1920 h:1080
    sh: missing ]
    root@vuzero4k:~# [   23.930331] [VID]: VIDEO_GET_SIZE aspect: 1 6
    sh: missing ]
    root@vuzero4k:~# [   23.934730] [VID]: VIDEO_SET_STREAMTYPE 1
    sh: missing ]
    root@vuzero4k:~# [   23.938906] [VID]: VIDEO_FREEZE 3  0
    sh: missing ]
    root@vuzero4k:~# [   23.942499] [VID]: VIDEO_PLAY 3  5 2
    sh: missing ]
    root@vuzero4k:~# [   23.953691] [VID]: VIDEO_SLOWMOTION 0    1
    sh: missing ]
    root@vuzero4k:~# [   23.959261] [VID]: VIDEO_FAST_FORWARD 0    1 0
    sh: missing ]
    root@vuzero4k:~# [   23.966464] [VID]: VIDEO_CONTINUE 3  1
    sh: missing ]
    root@vuzero4k:~# [   23.973119] [AUD]: AUDIO_CONTINUE 3 1 aph=0xcb440400
    sh: missing ]
    root@vuzero4k:~# [   23.979599] [AUD]: Mute : 1
    sh: missing ]
    root@vuzero4k:~# [   23.983204] [AUD]: AUDIO_CHANNEL_SELECT 0
    sh: missing ]
    root@vuzero4k:~# [   24.971038] [VID]: VIDEO_STOP 1  1
    sh: missing ]
    root@vuzero4k:~# [   24.974571] [AUD]: AUDIO_STOP 0
    sh: mis
Vu+ Zero 4K
4,8E, 9E, 13E, 31,5E, 36E, 75E, 80E (Телекарта), 90Е